WatchGuard Routing Table
If you have configured a BOVPN virtual interface, you can also add and edit VPN routes for a BOVPN virtual interface in the static routes table. ,With the Routing Table method, Fireware puts all the active external ... and the routes in its internal route table to see if it should send a packet ...
| 相關軟體 Connectivity Fixer 資訊 | |
|---|---|
 WatchGuard Routing Table 相關參考資料
About Multi-WAN Methods - WatchGuard Technologies
When you configure multi-WAN with the Routing Table option, the Firebox looks at its internal route table to check for specific static or dynamic routing ... https://www.watchguard.com Add a Static Route - WatchGuard Technologies
If you have configured a BOVPN virtual interface, you can also add and edit VPN routes for a BOVPN virtual interface in the static routes table. https://www.watchguard.com Configure the Routing Table Multi-WAN Method - WatchGuard ...
With the Routing Table method, Fireware puts all the active external ... and the routes in its internal route table to see if it should send a packet ... https://www.watchguard.com Multi-WAN Methods and Dynamic Routing - WatchGuard ...
The Routing Table method is a good choice if: You enable dynamic routing (RIP, OSPF, or BGP) and the routers on the external network advertise routes to the ... https://www.watchguard.com Read the Firebox Route Tables - WatchGuard Technologies
In the Status Report, each route table can show a maximum of 100 routes. If there are more than 100 routes, you can use Fireware Web UI or CLI to see a filtered ... https://www.watchguard.com Routes - WatchGuard Technologies
The metric set for this route in the routing table. To see the routes on your Firebox, from Fireware Web UI: Select System Status > Routes. The Routes page ... https://www.watchguard.com Routes and Routing - WatchGuard Technologies
This information is used to forward the network traffic to the next router in the route. Your Firebox automatically updates its route table when you change ... https://www.watchguard.com |