Set_false_path SDC
set_false_path¶. Cuts timing paths unidirectionally from each clock in -from to each clock in –to . Otherwise equivalent to ... ,... Set False Path in the TimeQuest Timing Analyzer, or with the set_false_path Synopsys ® Design Constraints (SDC) command described in the SDC syntax ...
| 相關軟體 Launch 資訊 | |
|---|---|
 Set_false_path SDC 相關參考資料
false path - CSDN博客
2018年10月19日 — ... 处理异步时钟？ 很简单，set_false_path 注意要from A to B，同时要from B to A 使用set_false_path：set_false_path -from [get_clocks clk1] -to [get_clocks clk2]set_false_path -from [get_clocks clk2] -to [get... https://blog.csdn.net SDC Commands — Verilog-to-Routing 8.1.0-dev documentation
set_false_path¶. Cuts timing paths unidirectionally from each clock in -from to each clock in –to . Otherwise equivalent to ... https://docs.verilogtorouting. Set False Path Dialog Box (set_false_path) - Intel
... Set False Path in the TimeQuest Timing Analyzer, or with the set_false_path Synopsys ® Design Constraints (SDC) command described in the SDC syntax ... https://www.intel.com set_false_path (::quartus::sdc) - Intel
Tcl Package and Version. Belongs to ::quartus::sdc 1.5. Syntax. set_false_path [-h | -help] [-long_help] [-fall_from <names> ] [-fall_to <names> ] [-from <names> ] ... https://www.intel.com set_false_path (SDC)
set_false_path (SDC). Identifies paths that are considered false and excluded from the timing analysis. set_false_path [-from from_list] [-through through_list] [-to ... http://ebook.pldworld.com set_false_path - Micro-IP Inc.
set_false_path. NAME set_false_path. Removes timing constraints from particular paths. SYNTAX int set_false_path [-rise | -fall] [-setup | -hold] [-from from_list https://www.micro-ip.com set_false_path和set_clock_groups有什么区别？ - 知乎
2019年11月2日 — 对于异步时钟，当我们书写SDC时，可以使用set_false_path语句来指定由于异步时钟导致的timing exceptions。 set_false_path-from [get_clocks ... https://zhuanlan.zhihu.com Timing exception: False path @ 工程師的碎碎唸:: 隨意窩Xuite ...
若問如何解讀SDC，結論都是看STA (Static timing analysis) 的結果。以現今的設計 ... "set_false_path" (以下簡稱為FP) 、 "set_multicycle_path" (以下簡稱為MCP) ... https://blog.xuite.net What does "set_false_path -through..." do? - Xilinx Forum
Within Vivado (and SDC/XDC) path enumeration is done the same way for all commands that need to select paths (these being the timing ... https://forums.xilinx.com |