set_multicycle_path

set_multicycle_path path_multiplier [-setup|-hold] [-start|-end] -from <StartPoint> -through <ThroughPoint> ...

set_multicycle_path

set_multicycle_path path_multiplier [-setup|-hold] [-start|-end] -from <StartPoint> -through <ThroughPoint> -to <EndPoint>. 其中这个path-_multiplier就是我们 ... ,2019年7月29日 — 理解错误之处欢迎指正。 该命令的格式如下. set_multicycle_path path_multiplier [-setup|-hold] [-start|-end] -from <StartPoint> -through < ...

相關軟體 Launch 資訊

Launch
Windows 中的“開始”屏幕將應用程序組織為多個圖塊組。 Launch 在“開始”屏幕上添加了快速訪問固定式碼頭的便利。拖放您最喜愛的應用程序到您的 Launch 碼頭,並迅速啟動它們,無論您在“開始”屏幕上刷過的位置。Launch 功能: 在“開始”屏幕上從 Launch 快速訪問您最喜愛的應用程序。訪問停靠的應用程序跳轉列表。點擊任何停靠的應用程序立即啟動它。將 Launch 放在開始屏幕... Launch 軟體介紹

set_multicycle_path 相關參考資料
AR# 63222: Vivado Constraints - Why and when is ... - Xilinx

The set_multicycle_path constraint is used to relax the path requirement when the default worst requirement is too restrictive based on the waveform ...

https://www.xilinx.com

Multicycle Path怎么设?看这篇就够了 - 极术社区

set_multicycle_path path_multiplier [-setup|-hold] [-start|-end] -from &lt;StartPoint&gt; -through &lt;ThroughPoint&gt; -to &lt;EndPoint&gt;. 其中这个path-_multiplier就是我们 ...

https://aijishu.com

sdc中set_multicycle_path的解释_zyn1347806的博客

2019年7月29日 — 理解错误之处欢迎指正。 该命令的格式如下. set_multicycle_path path_multiplier [-setup|-hold] [-start|-end] -from &lt;StartPoint&gt; -through &lt; ...

https://blog.csdn.net

set_multicycle_path (::quartus::sdc) - Intel

set_multicycle_path. The following table displays information for the set_multicycle_path Tcl command: Tcl Package and Version. Belongs to ::quartus ...

https://www.intel.com

set_multicycle_path - Micro-IP Inc.

the register or primary input at the path startpoint. ... moves the relation forward one cycle of the start clock. ... register or primary output at the path ...

https://www.micro-ip.com

時序例外(Timing Exceptions) - 台部落

時序例外(Timing Exceptions)——Multicycle Paths(set_multicycle_path). 原創 flypassion 2019-09-26 21:43. 1、多週期路徑約束目的?

https://www.twblogs.net

親身經歷華為海思面試,專業問題分享解析

2017年6月16日 — set_multicycle_path -hold 2 -from clk1 -to clk2. 解釋面試官的題目之前,我們先看一下set_multicycle_path這個SDC命令的其他選項的意思.

https://kknews.cc