Syncovery 歷史舊版本 Page23

更新時間：2022-11-18
更新細節：

What's new in this version:

Syncovery 10.1.6 (64-bit)
- Improved handling of rare S3 error related to the system time being too different from the S3 server time
- AcceptAllSSLCertificates=1 can now also be used to accept unknown email server certificates used in the “Email” protocol
- The Redundancy Master setting is now saved in Status.ini rather than Syncovery.ini, so that the main INI file can be copied to a redundancy slave without making it another master


Syncovery 10.1.5 (64-bit)
- More efficient real-time event queue, to fix an occasional error “Critical Section Hang”
- Fixes button positioning in the French profile editor dialog with screen resolutions that use lower than 200% magnification


Syncovery 10.1.4 (64-bit)
- Folders shared from Google Team Drives are now included when browsing the “Shared with me” folders
- Fixes an error creating folders via WebDAV, especially when using the checkmark “On the right side, create a new folder each time”
- Implements retries when closing and appending the log file, possibly fixing rare issues where then main copying phase was missing from the profile run’s log file


Syncovery 10.1.3 (64-bit)
- Fixes a bug causing the scheduler to not start any profiles with some special settings, especially if the “Max. simultaneous jobs to run in a single execution process” is set to 1


Syncovery 10.1.2 (64-bit)
- Fixes email notifications being sent almost always, ignoring the actual notification settings


Syncovery 10.1.1 (64-bit)
- Adds some internal double-checks to ensure that permissions are never modified on the source side in one-way sync profiles
- Fixes a few minor bugs


Syncovery 10.1.0 (64-bit)
Fixed:
- Fixes profile groups not being shown in the profile selection list in Wizard Mode
- Fixes “execute after” command lines prefixed with ++ being executed despite “nothing to do” when using the new sub-job spawning feature


Syncovery 10.0.10 (64-bit)
Fixed:
- profile groups not being shown in the profile selection list in Wizard Mode
- “execute after” command lines prefixed with ++ being executed despite “nothing to do” when using the new sub-job spawning feature


Syncovery 10.0.9 (64-bit)
- Adds s checkmark on the Options tab sheet of the SmartTracking dialog: “Ignore File Creation Timestamps When Detecting Deleted Files”. This can help if you find that SmartTracking does not always detect deleted files, and the log file contains a line similar to: “File on right side created after last run completed”.
- On the Real-Time Settings dialog, tab sheet “Advanced”, the option to “switch to a normal, full sync if more than X real-time events are to be processed” can now also be used for the default mode “Process Complete folders”.


Syncovery 10.0.6 (64-bit)
- Improves SmartTracking detection of deleted files
- The feature “delete nothing to do logs” now works with logs for additional destinations


Syncovery 10.0.5 (64-bit)
- Fixes additional destinations from a profile being preconfigured as default for a new profile. New profiles will now correctly start empty with no additional destinations.


Syncovery 10.0.3 (64-bit)
- Enables all the new SSH algorithms in the updated SecureBlackBox library so it’s really compatible with all current SFTP servers. The Advanced SSH Settings dialog has been updated to include the new algorithms.
- Includes the new Syncovery Remote Service v10.00 to support the new “block level copying + versioning” feature where the Remote Service is used to make a versioned copy of the destination file, which can then be updated on a block level basis.


Syncovery 10.0.2 (64-bit)
- Fixes a Range Check Error when logging Windows Events in the 64 bit edition, which could also prevent the scheduler from starting


Syncovery 10.0.1 (64-bit)
New:
- Sync with multiple destinations in a single profile
- Free grouping of profiles – independent from profile names
- Adds support for the 7-Zip format (Windows only)
- Includes an updated SecureBlackBox library for SSH/SFTP
- Support for empty folders via S3 and Azure BLOB Storage protocols
- Adds the ability to combine versioning and block level copying
- Can spawn separate sub-jobs for each subfolder
- Adds miscellaneous smaller features
- New visual themes
- The upgrade is free for licenses issued since September 2020
- For older licenses, please click here to order your upgrade now!

更新時間：2022-11-18
更新細節：

更新時間：2022-11-16
更新細節：

更新時間：2022-11-16
更新細節：

What's new in this version:

Improved:
- core: Bump net-ssh dependency to 7.0 and remove patches
- synced_folders/rsync: Include ssh extra_args value

Fixed:
- command/serve: Force root level namespace for Google constant
- guest/solaris: Fix insecure key authorized keys removal
- provider/virtualbox: Fix :private_network support for VirtualBox 7 on macOS
- provider/virtualbox: Prevent localization of command output
- provisioner/ansible: Update setup packages in debian capability

更新時間：2022-11-14
更新細節：

更新時間：2022-11-13
更新細節：

What's new in this version:

- Updated the using of Microsoft Azure Text-To-Speech

更新時間：2022-11-13
更新細節：

What's new in this version:

Syncovery 10.1.4 (64-bit)
- Folders shared from Google Team Drives are now included when browsing the “Shared with me” folders
- Fixes an error creating folders via WebDAV, especially when using the checkmark “On the right side, create a new folder each time”
- Implements retries when closing and appending the log file, possibly fixing rare issues where then main copying phase was missing from the profile run’s log file


Syncovery 10.1.3 (64-bit)
- Fixes a bug causing the scheduler to not start any profiles with some special settings, especially if the “Max. simultaneous jobs to run in a single execution process” is set to 1


Syncovery 10.1.2 (64-bit)
- Fixes email notifications being sent almost always, ignoring the actual notification settings


Syncovery 10.1.1 (64-bit)
- Adds some internal double-checks to ensure that permissions are never modified on the source side in one-way sync profiles
- Fixes a few minor bugs


Syncovery 10.1.0 (64-bit)
Fixed:
- Fixes profile groups not being shown in the profile selection list in Wizard Mode
- Fixes “execute after” command lines prefixed with ++ being executed despite “nothing to do” when using the new sub-job spawning feature


Syncovery 10.0.10 (64-bit)
Fixed:
- profile groups not being shown in the profile selection list in Wizard Mode
- “execute after” command lines prefixed with ++ being executed despite “nothing to do” when using the new sub-job spawning feature


Syncovery 10.0.9 (64-bit)
- Adds s checkmark on the Options tab sheet of the SmartTracking dialog: “Ignore File Creation Timestamps When Detecting Deleted Files”. This can help if you find that SmartTracking does not always detect deleted files, and the log file contains a line similar to: “File on right side created after last run completed”.
- On the Real-Time Settings dialog, tab sheet “Advanced”, the option to “switch to a normal, full sync if more than X real-time events are to be processed” can now also be used for the default mode “Process Complete folders”.


Syncovery 10.0.6 (64-bit)
- Improves SmartTracking detection of deleted files
- The feature “delete nothing to do logs” now works with logs for additional destinations


Syncovery 10.0.5 (64-bit)
- Fixes additional destinations from a profile being preconfigured as default for a new profile. New profiles will now correctly start empty with no additional destinations.


Syncovery 10.0.3 (64-bit)
- Enables all the new SSH algorithms in the updated SecureBlackBox library so it’s really compatible with all current SFTP servers. The Advanced SSH Settings dialog has been updated to include the new algorithms.
- Includes the new Syncovery Remote Service v10.00 to support the new “block level copying + versioning” feature where the Remote Service is used to make a versioned copy of the destination file, which can then be updated on a block level basis.


Syncovery 10.0.2 (64-bit)
- Fixes a Range Check Error when logging Windows Events in the 64 bit edition, which could also prevent the scheduler from starting


Syncovery 10.0.1 (64-bit)
New:
- Sync with multiple destinations in a single profile
- Free grouping of profiles – independent from profile names
- Adds support for the 7-Zip format (Windows only)
- Includes an updated SecureBlackBox library for SSH/SFTP
- Support for empty folders via S3 and Azure BLOB Storage protocols
- Adds the ability to combine versioning and block level copying
- Can spawn separate sub-jobs for each subfolder
- Adds miscellaneous smaller features
- New visual themes
- The upgrade is free for licenses issued since September 2020
- For older licenses, please click here to order your upgrade now!

更新時間：2022-11-11
更新細節：

更新時間：2022-11-03
更新細節：

What's new in this version:

Enhancements:
- OpenVPN 3 support -- the GUI can also work as a user interface for the OpenVPN 3 client
- pkcs11-id-management -- the GUI can list available pkcs11-ids and allows the user to select one
- Persistent connections -- the GUI lists connections started at boot by the automatic service and lets the user control them. Interactive inputs such as username/password with such connections are possible.

更新時間：2022-11-01
更新細節：

What's new in this version:

Syncovery 10.1.3 (64-bit)
- Fixes a bug causing the scheduler to not start any profiles with some special settings, especially if the “Max. simultaneous jobs to run in a single execution process” is set to 1


Syncovery 10.1.2 (64-bit)
- Fixes email notifications being sent almost always, ignoring the actual notification settings


Syncovery 10.1.1 (64-bit)
- Adds some internal double-checks to ensure that permissions are never modified on the source side in one-way sync profiles
- Fixes a few minor bugs


Syncovery 10.1.0 (64-bit)
Fixed:
- Fixes profile groups not being shown in the profile selection list in Wizard Mode
- Fixes “execute after” command lines prefixed with ++ being executed despite “nothing to do” when using the new sub-job spawning feature


Syncovery 10.0.10 (64-bit)
Fixed:
- profile groups not being shown in the profile selection list in Wizard Mode
- “execute after” command lines prefixed with ++ being executed despite “nothing to do” when using the new sub-job spawning feature


Syncovery 10.0.9 (64-bit)
- Adds s checkmark on the Options tab sheet of the SmartTracking dialog: “Ignore File Creation Timestamps When Detecting Deleted Files”. This can help if you find that SmartTracking does not always detect deleted files, and the log file contains a line similar to: “File on right side created after last run completed”.
- On the Real-Time Settings dialog, tab sheet “Advanced”, the option to “switch to a normal, full sync if more than X real-time events are to be processed” can now also be used for the default mode “Process Complete folders”.


Syncovery 10.0.6 (64-bit)
- Improves SmartTracking detection of deleted files
- The feature “delete nothing to do logs” now works with logs for additional destinations


Syncovery 10.0.5 (64-bit)
- Fixes additional destinations from a profile being preconfigured as default for a new profile. New profiles will now correctly start empty with no additional destinations.


Syncovery 10.0.3 (64-bit)
- Enables all the new SSH algorithms in the updated SecureBlackBox library so it’s really compatible with all current SFTP servers. The Advanced SSH Settings dialog has been updated to include the new algorithms.
- Includes the new Syncovery Remote Service v10.00 to support the new “block level copying + versioning” feature where the Remote Service is used to make a versioned copy of the destination file, which can then be updated on a block level basis.


Syncovery 10.0.2 (64-bit)
- Fixes a Range Check Error when logging Windows Events in the 64 bit edition, which could also prevent the scheduler from starting


Syncovery 10.0.1 (64-bit)
New:
- Sync with multiple destinations in a single profile
- Free grouping of profiles – independent from profile names
- Adds support for the 7-Zip format (Windows only)
- Includes an updated SecureBlackBox library for SSH/SFTP
- Support for empty folders via S3 and Azure BLOB Storage protocols
- Adds the ability to combine versioning and block level copying
- Can spawn separate sub-jobs for each subfolder
- Adds miscellaneous smaller features
- New visual themes
- The upgrade is free for licenses issued since September 2020
- For older licenses, please click here to order your upgrade now!