Syncovery (64-bit) 歷史舊版本 Page8

更新時間：2022-11-27
更新細節：

更新時間：2022-11-27
更新細節：

What's new in this version:

- Added the using of Viettel Text-To-Speech
- Small improvements
- Updated the using of Microsoft Azure Text-To-Speech
- Disabled the using of Tinkoff VoiceKit

更新時間：2022-11-27
更新細節：

What's new in this version:

Syncovery 10.1.9 (64-bit)
- In attended mode, Syncovery will now always give you a chance to make room or replace the destination drive if it becomes full during the copying phase
- Now correctly saves the Ultra compression level for 7-zip files
- No longer specifies any storage class for S3 uploads of empty files or emulated folder items
- Additional fixes


Syncovery 10.1.8 (64-bit)
- Can now access folders listed in the “Computers” section of Google Drive. Just type the computer name in the Container field on the Internet Protocol Settigs dialog.
- Fixes a rare error about a critical section hang when larger cloud hierarchies are scanned with multiple threads


Syncovery 10.1.7 (64-bit)
- Fixes stability issues with FTP library 1


Syncovery 10.1.6 (64-bit)
- Improved handling of rare S3 error related to the system time being too different from the S3 server time
- AcceptAllSSLCertificates=1 can now also be used to accept unknown email server certificates used in the “Email” protocol
- The Redundancy Master setting is now saved in Status.ini rather than Syncovery.ini, so that the main INI file can be copied to a redundancy slave without making it another master


Syncovery 10.1.5 (64-bit)
- More efficient real-time event queue, to fix an occasional error “Critical Section Hang”
- Fixes button positioning in the French profile editor dialog with screen resolutions that use lower than 200% magnification


Syncovery 10.1.4 (64-bit)
- Folders shared from Google Team Drives are now included when browsing the “Shared with me” folders
- Fixes an error creating folders via WebDAV, especially when using the checkmark “On the right side, create a new folder each time”
- Implements retries when closing and appending the log file, possibly fixing rare issues where then main copying phase was missing from the profile run’s log file


Syncovery 10.1.3 (64-bit)
- Fixes a bug causing the scheduler to not start any profiles with some special settings, especially if the “Max. simultaneous jobs to run in a single execution process” is set to 1


Syncovery 10.1.2 (64-bit)
- Fixes email notifications being sent almost always, ignoring the actual notification settings


Syncovery 10.1.1 (64-bit)
- Adds some internal double-checks to ensure that permissions are never modified on the source side in one-way sync profiles
- Fixes a few minor bugs


Syncovery 10.1.0 (64-bit)
Fixed:
- Fixes profile groups not being shown in the profile selection list in Wizard Mode
- Fixes “execute after” command lines prefixed with ++ being executed despite “nothing to do” when using the new sub-job spawning feature


Syncovery 10.0.10 (64-bit)
Fixed:
- profile groups not being shown in the profile selection list in Wizard Mode
- “execute after” command lines prefixed with ++ being executed despite “nothing to do” when using the new sub-job spawning feature


Syncovery 10.0.9 (64-bit)
- Adds s checkmark on the Options tab sheet of the SmartTracking dialog: “Ignore File Creation Timestamps When Detecting Deleted Files”. This can help if you find that SmartTracking does not always detect deleted files, and the log file contains a line similar to: “File on right side created after last run completed”.
- On the Real-Time Settings dialog, tab sheet “Advanced”, the option to “switch to a normal, full sync if more than X real-time events are to be processed” can now also be used for the default mode “Process Complete folders”.


Syncovery 10.0.6 (64-bit)
- Improves SmartTracking detection of deleted files
- The feature “delete nothing to do logs” now works with logs for additional destinations


Syncovery 10.0.5 (64-bit)
- Fixes additional destinations from a profile being preconfigured as default for a new profile. New profiles will now correctly start empty with no additional destinations.


Syncovery 10.0.3 (64-bit)
- Enables all the new SSH algorithms in the updated SecureBlackBox library so it’s really compatible with all current SFTP servers. The Advanced SSH Settings dialog has been updated to include the new algorithms.
- Includes the new Syncovery Remote Service v10.00 to support the new “block level copying + versioning” feature where the Remote Service is used to make a versioned copy of the destination file, which can then be updated on a block level basis.


Syncovery 10.0.2 (64-bit)
- Fixes a Range Check Error when logging Windows Events in the 64 bit edition, which could also prevent the scheduler from starting


Syncovery 10.0.1 (64-bit)
New:
- Sync with multiple destinations in a single profile
- Free grouping of profiles – independent from profile names
- Adds support for the 7-Zip format (Windows only)
- Includes an updated SecureBlackBox library for SSH/SFTP
- Support for empty folders via S3 and Azure BLOB Storage protocols
- Adds the ability to combine versioning and block level copying
- Can spawn separate sub-jobs for each subfolder
- Adds miscellaneous smaller features
- New visual themes
- The upgrade is free for licenses issued since September 2020
- For older licenses, please click here to order your upgrade now!

更新時間：2022-11-20
更新細節：

What's new in this version:

Features:
- Added support for navigating the overlay using a XBox controller (to open/close press left + right shoulder buttons and the start button simultaneously)
- This is only active when "[INPUT] GamepadNavigation=1" is set in ReShade.ini!
- Controls are as follows: www.dearimgui.org/controls_sheets/imgui%...%20v6%20-%20Xbox.png

Fixed:
- hooking in Evoland and other D3D10/11 games on Windows 7
- crash with DXVK 2.0 (or other Vulkan games using the "VK_EXT_graphics_pipeline_library" extension)
- crash on startup in Toontown Rewritten
- tree and cloud rendering artifacts in Minecraft
- bad performance while the "Add-ons" window in the overlay is visible
- ReShade rendering applied multiple times to the same frame in games using "D3DPRESENT_DONOTWAIT" or "DXGI_PRESENT_DO_NOT_WAIT" present flag
- modifying resource description in "create_resource" event having no effect in D3D10/11
- "swapchain::get_current_back_buffer_index()" result being out of date in "present" event in D3D12/Vulkan
- "command_list::copy_texture_region" not always performing blitting in Vulkan when texture dimensions do not match
- "effect_runtime::get_texture_binding" not working for textures with a semantic
- crash in Vulkan when destroying shared resource
- crash when binding nullptr constant buffer in D3D11
- nullptr descriptor heap being bound sometimes after D3D12 mipmap generation
- format conversion for formats from "GL_NV_depth_buffer_float" OpenGL extension and "GL_ALPHA", "GL_LUMINANCE", "GL_INTENSITY" and "GL_LUMINANCE_ALPHA"

Miscellaneous:
- Added "vkAcquireNextImageKHR" hook to update back buffer index in Vulkan
- Added support for imgui command user callbacks
- Added support for "command_list::copy_buffer_to_texture()" from buffer resource to back buffer in OpenGL (compatibility OpenGL contexts only)
- Added support for push descriptors with multiple descriptor ranges (see "pipeline_layout_param_type::push_descriptors_ranges")
- Added support for creating multisampled textures in OpenGL
- Added "bind_*" events for D3D10/11/12 "ClearState" command
- Added "push_descriptors" event for "ID3D12GraphicsCommandList::Set(Compute/Graphics)Root(ShaderResource/UnorderedAccess)View"
- Added "bind_descriptor_sets" event for "ID3D12GraphicsCommandList::Set(Compute/Graphics)RootSignature"
- Improved D3D12/Vulkan barrier access to "resource_usage" enum conversion
- Changed preset saving to skip "TechniqueSorting" key when it is equivalent to the "Techniques" key
- Removed automatic D3D12 descriptor state backup and restore in "render_effects" and "render_technique" (this is better done properly inside add-ons using these)

更新時間：2022-11-19
更新細節：

What's new in this version:

Syncovery 10.1.7 (64-bit)
- Fixes stability issues with FTP library 1


Syncovery 10.1.6 (64-bit)
- Improved handling of rare S3 error related to the system time being too different from the S3 server time
- AcceptAllSSLCertificates=1 can now also be used to accept unknown email server certificates used in the “Email” protocol
- The Redundancy Master setting is now saved in Status.ini rather than Syncovery.ini, so that the main INI file can be copied to a redundancy slave without making it another master


Syncovery 10.1.5 (64-bit)
- More efficient real-time event queue, to fix an occasional error “Critical Section Hang”
- Fixes button positioning in the French profile editor dialog with screen resolutions that use lower than 200% magnification


Syncovery 10.1.4 (64-bit)
- Folders shared from Google Team Drives are now included when browsing the “Shared with me” folders
- Fixes an error creating folders via WebDAV, especially when using the checkmark “On the right side, create a new folder each time”
- Implements retries when closing and appending the log file, possibly fixing rare issues where then main copying phase was missing from the profile run’s log file


Syncovery 10.1.3 (64-bit)
- Fixes a bug causing the scheduler to not start any profiles with some special settings, especially if the “Max. simultaneous jobs to run in a single execution process” is set to 1


Syncovery 10.1.2 (64-bit)
- Fixes email notifications being sent almost always, ignoring the actual notification settings


Syncovery 10.1.1 (64-bit)
- Adds some internal double-checks to ensure that permissions are never modified on the source side in one-way sync profiles
- Fixes a few minor bugs


Syncovery 10.1.0 (64-bit)
Fixed:
- Fixes profile groups not being shown in the profile selection list in Wizard Mode
- Fixes “execute after” command lines prefixed with ++ being executed despite “nothing to do” when using the new sub-job spawning feature


Syncovery 10.0.10 (64-bit)
Fixed:
- profile groups not being shown in the profile selection list in Wizard Mode
- “execute after” command lines prefixed with ++ being executed despite “nothing to do” when using the new sub-job spawning feature


Syncovery 10.0.9 (64-bit)
- Adds s checkmark on the Options tab sheet of the SmartTracking dialog: “Ignore File Creation Timestamps When Detecting Deleted Files”. This can help if you find that SmartTracking does not always detect deleted files, and the log file contains a line similar to: “File on right side created after last run completed”.
- On the Real-Time Settings dialog, tab sheet “Advanced”, the option to “switch to a normal, full sync if more than X real-time events are to be processed” can now also be used for the default mode “Process Complete folders”.


Syncovery 10.0.6 (64-bit)
- Improves SmartTracking detection of deleted files
- The feature “delete nothing to do logs” now works with logs for additional destinations


Syncovery 10.0.5 (64-bit)
- Fixes additional destinations from a profile being preconfigured as default for a new profile. New profiles will now correctly start empty with no additional destinations.


Syncovery 10.0.3 (64-bit)
- Enables all the new SSH algorithms in the updated SecureBlackBox library so it’s really compatible with all current SFTP servers. The Advanced SSH Settings dialog has been updated to include the new algorithms.
- Includes the new Syncovery Remote Service v10.00 to support the new “block level copying + versioning” feature where the Remote Service is used to make a versioned copy of the destination file, which can then be updated on a block level basis.


Syncovery 10.0.2 (64-bit)
- Fixes a Range Check Error when logging Windows Events in the 64 bit edition, which could also prevent the scheduler from starting


Syncovery 10.0.1 (64-bit)
New:
- Sync with multiple destinations in a single profile
- Free grouping of profiles – independent from profile names
- Adds support for the 7-Zip format (Windows only)
- Includes an updated SecureBlackBox library for SSH/SFTP
- Support for empty folders via S3 and Azure BLOB Storage protocols
- Adds the ability to combine versioning and block level copying
- Can spawn separate sub-jobs for each subfolder
- Adds miscellaneous smaller features
- New visual themes
- The upgrade is free for licenses issued since September 2020
- For older licenses, please click here to order your upgrade now!

更新時間：2022-11-19
更新細節：

更新時間：2022-11-18
更新細節：

What's new in this version:

Syncovery 10.1.6 (64-bit)
- Improved handling of rare S3 error related to the system time being too different from the S3 server time
- AcceptAllSSLCertificates=1 can now also be used to accept unknown email server certificates used in the “Email” protocol
- The Redundancy Master setting is now saved in Status.ini rather than Syncovery.ini, so that the main INI file can be copied to a redundancy slave without making it another master


Syncovery 10.1.5 (64-bit)
- More efficient real-time event queue, to fix an occasional error “Critical Section Hang”
- Fixes button positioning in the French profile editor dialog with screen resolutions that use lower than 200% magnification


Syncovery 10.1.4 (64-bit)
- Folders shared from Google Team Drives are now included when browsing the “Shared with me” folders
- Fixes an error creating folders via WebDAV, especially when using the checkmark “On the right side, create a new folder each time”
- Implements retries when closing and appending the log file, possibly fixing rare issues where then main copying phase was missing from the profile run’s log file


Syncovery 10.1.3 (64-bit)
- Fixes a bug causing the scheduler to not start any profiles with some special settings, especially if the “Max. simultaneous jobs to run in a single execution process” is set to 1


Syncovery 10.1.2 (64-bit)
- Fixes email notifications being sent almost always, ignoring the actual notification settings


Syncovery 10.1.1 (64-bit)
- Adds some internal double-checks to ensure that permissions are never modified on the source side in one-way sync profiles
- Fixes a few minor bugs


Syncovery 10.1.0 (64-bit)
Fixed:
- Fixes profile groups not being shown in the profile selection list in Wizard Mode
- Fixes “execute after” command lines prefixed with ++ being executed despite “nothing to do” when using the new sub-job spawning feature


Syncovery 10.0.10 (64-bit)
Fixed:
- profile groups not being shown in the profile selection list in Wizard Mode
- “execute after” command lines prefixed with ++ being executed despite “nothing to do” when using the new sub-job spawning feature


Syncovery 10.0.9 (64-bit)
- Adds s checkmark on the Options tab sheet of the SmartTracking dialog: “Ignore File Creation Timestamps When Detecting Deleted Files”. This can help if you find that SmartTracking does not always detect deleted files, and the log file contains a line similar to: “File on right side created after last run completed”.
- On the Real-Time Settings dialog, tab sheet “Advanced”, the option to “switch to a normal, full sync if more than X real-time events are to be processed” can now also be used for the default mode “Process Complete folders”.


Syncovery 10.0.6 (64-bit)
- Improves SmartTracking detection of deleted files
- The feature “delete nothing to do logs” now works with logs for additional destinations


Syncovery 10.0.5 (64-bit)
- Fixes additional destinations from a profile being preconfigured as default for a new profile. New profiles will now correctly start empty with no additional destinations.


Syncovery 10.0.3 (64-bit)
- Enables all the new SSH algorithms in the updated SecureBlackBox library so it’s really compatible with all current SFTP servers. The Advanced SSH Settings dialog has been updated to include the new algorithms.
- Includes the new Syncovery Remote Service v10.00 to support the new “block level copying + versioning” feature where the Remote Service is used to make a versioned copy of the destination file, which can then be updated on a block level basis.


Syncovery 10.0.2 (64-bit)
- Fixes a Range Check Error when logging Windows Events in the 64 bit edition, which could also prevent the scheduler from starting


Syncovery 10.0.1 (64-bit)
New:
- Sync with multiple destinations in a single profile
- Free grouping of profiles – independent from profile names
- Adds support for the 7-Zip format (Windows only)
- Includes an updated SecureBlackBox library for SSH/SFTP
- Support for empty folders via S3 and Azure BLOB Storage protocols
- Adds the ability to combine versioning and block level copying
- Can spawn separate sub-jobs for each subfolder
- Adds miscellaneous smaller features
- New visual themes
- The upgrade is free for licenses issued since September 2020
- For older licenses, please click here to order your upgrade now!

更新時間：2022-11-18
更新細節：

更新時間：2022-11-16
更新細節：

What's new in this version:

Improved:
- core: Bump net-ssh dependency to 7.0 and remove patches
- synced_folders/rsync: Include ssh extra_args value

Fixed:
- command/serve: Force root level namespace for Google constant
- guest/solaris: Fix insecure key authorized keys removal
- provider/virtualbox: Fix :private_network support for VirtualBox 7 on macOS
- provider/virtualbox: Prevent localization of command output
- provisioner/ansible: Update setup packages in debian capability

更新時間：2022-11-16
更新細節：