smartctl reset
Is there some way to reset the smart error count - or smart error log? ... a different monitoring system based on a cron job which runs smartctl ..., My ATA/SATA drive is not in the smartctl / smartd database ..... The self-test log then reports Aborted by host or Interrupted (host reset) as status.
| 相關軟體 Hard Disk Sentinel 資訊 | |
|---|---|
 smartctl reset 相關參考資料
#1153 (Command timeout occurred when I used the ...
Hi,. When I used this command "smartctl -c -t short /dev/sdb" to verify SSD, smartctl (using smartctl -a)test result would show "Interrupt (host reset)" as following. https://www.smartmontools.org Can SMART error log be reset? - CentOS - CentOS Forums
Is there some way to reset the smart error count - or smart error log? ... a different monitoring system based on a cron job which runs smartctl ... https://forums.centos.org FAQ – smartmontools
My ATA/SATA drive is not in the smartctl / smartd database ..... The self-test log then reports Aborted by host or Interrupted (host reset) as status. https://www.smartmontools.org hard drive - How to reset SMART results - Ask Ubuntu
How can I reset the SMART results so it does not register previous results. ... For the moment I did the following sudo smartctl -l sataphy,reset ... https://askubuntu.com Linux command – smartctl - Benjr.tw
同事推薦我可以用smartctl 直接看更快,這是透過硬碟本身所提供的S.M.A.R.T. ... root@ubuntu:~# smartctl -H /dev/sdb .... Phy reset problem = 0. http://benjr.tw S.M.A.R.T. Monitoring Tools [smartmontools-support]Clearing ...
Is there a command with smartctl to clear the error log? # smartctl -l error /dev/hda [error here] # # Smartctl [command to clear error log] # Smartctl -l error ... https://sourceforge.net SMART-Test never finishes - Super User
Yet the hardware command send by smartctl may time out before the test completes, causing the kernel to reset the link and ending up in the same situation as ... https://superuser.com smartctl(8) - Linux man page
smartctl controls the Self-Monitoring, Analysis and Reporting Technology ... This prevents that the drive accepts any security commands until next reset. Note that ... https://linux.die.net SOLVED - Unable to reset Current_Pending_Sector (SMART ...
Testing has begun. Please wait 542 minutes for test to complete. Test will complete after Thu Jun 1 21:35:48 2017 Use smartctl -X to abort test. https://www.ixsystems.com [smartmontools-support]SMART reset? - SourceForge
Is it somehow possible to reset SMART data? ... Run smartctl -t long, and wait until the test completes. Then look at the test results using smartctl -l selftest. Bruce ... https://sourceforge.net |