set_false_path xilinx
I do not want timing synchronization between IPs. I have tried to used set_false_path command: set_false_path -to [get_cells my_design_i/DDC2256A_deserializer_0] ... ,2021年5月19日 — I want to ignore all the paths that come an goes from that module but not the internal paths of the register bank module is that possible using set_false_path?
| 相關軟體 Launch 資訊 | |
|---|---|
 set_false_path xilinx 相關參考資料
Advanced Timing Exceptions - False Path, Min-Max Delay and ...
https://www.xilinx.com set_false_path from one IP to another - Adaptive Support - AMD
I do not want timing synchronization between IPs. I have tried to used set_false_path command: set_false_path -to [get_cells my_design_i/DDC2256A_deserializer_0] ... https://support.xilinx.com set_false_path - Adaptive Support - AMD
2021年5月19日 — I want to ignore all the paths that come an goes from that module but not the internal paths of the register bank module is that possible using set_false_path? https://support.xilinx.com set_false_path doesn't work - Adaptive Support - AMD
I'm doing timing closure on a prototype. Here I do have a signal called scan_mode. This signal is set once at the startup and then will not be changed any more. https://support.xilinx.com set_false_path constraint - Adaptive Support - AMD
2020年4月22日 — I use this statement in my constraint file to bypass timing checking on them: set_false_path -from [get_pins reset}] -to [all_registers] https://support.xilinx.com set_false_path - 2021.2 English
Sets false timing paths in the design that are ignored during timing analysis. Note: This command operates silently and does not return direct feedback of its ... https://docs.amd.com set_false_path - 2024.1 English
Sets false timing paths in the design that are ignored during timing analysis. Note: This command operates silently and does not return direct feedback of its ... https://docs.amd.com VIVADO时序约束之时序例外（set_false_path） 原创
2022年12月5日 — 表示从路径的开始到结束传播数据所需的时钟周期数。 set_false_path, 表示不应分析设计中的逻辑路径。 set_max_delay, 设置最大路径延迟值。 这将使用用户 ... https://blog.csdn.net Setting False Path Exceptions
https://www.xilinx.com set_false_path does not work as expected - Adaptive Support
Hi All, I notice that the constraint set_false_path is not applied correctly to SOME elements. I mark all the registers I don't care about with '_tig' and ... https://support.xilinx.com |