route add 1
To work around this issue, use one of the following methods. Method 1: Manually Add the Default Route for the Interface. Use the Route Add ..., route ADD 157.0.0.0 MASK 255.0.0.0 157.55.80.1 METRIC 3 IF 2 .... metric route ADD 0.0.0.0 MASK 0.0.0.0 192.168.76.2 METRIC 1 IF 11 .
| 相關軟體 Cisco Packet Tracer 資訊 | |
|---|---|
 route add 1 相關參考資料
1. route - FTP Directory Listing
Here we'll look at several tasks you can perform with route. You can display routes, add routes (most importantly, the default route), remove routes, and examine ... ftp://ftp.iitb.ac.in Default Gateway Route Does Not Appear in the Routing Table After ...
To work around this issue, use one of the following methods. Method 1: Manually Add the Default Route for the Interface. Use the Route Add ... https://support.microsoft.com How can I set the metric of a manually added route on Windows ...
route ADD 157.0.0.0 MASK 255.0.0.0 157.55.80.1 METRIC 3 IF 2 .... metric route ADD 0.0.0.0 MASK 0.0.0.0 192.168.76.2 METRIC 1 IF 11 . https://serverfault.com How to Add a Static TCPIP Route to the Windows Routing Table
In some specific types of environments, you might find it useful to add a static route to the routing table in Windows. Here's how to go about it. https://www.howtogeek.com MS-DOS route command help and information - Computer Hope
Route command information for MS-DOS and the Windows command line. ... Example> route ADD 157.0.0.0 MASK 155.0.0.0 157.55.80.1 IF 1. https://www.computerhope.com route add 設定@ 不求甚解的部落格:: 痞客邦::
-p 與ADD 命令一起使用時，路由在系統開機期間 可持續。依預設， ... 範例> route ADD 157.0.0.0 MASK 155.0.0.0 157.55.80.1 IF 1 路由新增失敗: ... http://simonrb.pixnet.net Server 雙網卡設定Route add @ 阿博的筆記本:: 痞客邦::
問題：1.其他網段電腦10.56.6.x or 10.56.7.x 無法連線至(B網卡)10.56.3.42 ... route add 10.56.0.0 mask 255.255.0.0 10.56.3.254 metric 1. 設定完 ... http://maxlove0319.pixnet.net Specify route to an interface in Windows cmd - Server Fault
X where X=1-254. So, your command should be: route add 192.168.0.6 mask 255.255.255.255 192.168.0.10 IF 13. Looking again at your ... https://serverfault.com When I add a static IP route, what value do I use for the interface? | IT Pro
route -p add 0.0.0.0 mask 0.0.0.0 192.168.1.1 metric 1 if 0x20003. This sample command uses the -p option to add a persistent route (i.e., 0.0.0.0) that will still be ... https://www.itprotoday.com Windows route初體驗@ Jemmy Walker :: 痞客邦::
route ADD <Network Destination> MASK <Netmask> <Gateway> (if <Interface> metric <Metric>) ... 很妙的是Gateway可以用Local IP替代，而不是尾數是1。 http://jemmywalker.pixnet.net |