ping default port

The standard ping command does not use TCP or UDP. It uses ICMP. To be more precise ICMP type 8 (echo message) and type...

ping default port

The standard ping command does not use TCP or UDP. It uses ICMP. To be more precise ICMP type 8 (echo message) and type 0 (echo reply message) are used. ICMP has no ports! See RFC792 for further details., Forum discussion: What port does a TCP ping goto? I know you can specify the port number to check for services and such but what is the default port?

相關軟體 Angry IP Scanner 資訊

Angry IP Scanner
憤怒的 IP 掃描器是一個非常快速的 IP 地址和端口掃描器。它可以掃描任何範圍的 IP 地址以及任何端口。它是跨平台和輕量級的。不需要任何安裝,任何地方都可以自由複制和使用它.Angry IP 掃描器只需簡單地 ping 每個 IP 地址,以檢查它是否存在,然後可以選擇解析其主機名,確定 MAC 地址,掃描端口等。每個主機收集的數據可以通過插件進行擴展. 它還具有其他功能,如 NetBIOS 信... Angry IP Scanner 軟體介紹

ping default port 相關參考資料
Which Port Is Standard for Ping? | Techwalla.com

Every networking professional knows about ping and uses it regularly. Networking connections need the source and destination address of the two computers in the connection and also the source and des...

https://www.techwalla.com

tcp - PING port number? - Network Engineering Stack Exchange

The standard ping command does not use TCP or UDP. It uses ICMP. To be more precise ICMP type 8 (echo message) and type 0 (echo reply message) are used. ICMP has no ports! See RFC792 for further deta...

https://networkengineering.sta

Default TCP ping port - Open Forum | DSLReports Forums

Forum discussion: What port does a TCP ping goto? I know you can specify the port number to check for services and such but what is the default port?

http://www.dslreports.com

default port for ping. | Riverbed Splash

Hi,. Ping uses the Primary address by default. Use the -I option (capital eye). At SteelHead CLI : ping -I <source in-path address> <destination in-path address>. Sha. Report Abuse; Like S...

https://splash.riverbed.com

Ping - Port Number? - 31935 - The Cisco Learning Network

Hi, Ping - ICMP Can one tell me what port does ping use? Thanks, Uday 31935.

https://learningnetwork.cisco.

Re: What Port Does Ping Use? - Debian Mailing Lists

On Fri, 12 Nov 1999, Onno wrote: > At 10:23 AM 11/11/99 -0600, Lyno Sullivan wrote: > >At 08:44 AM 11/10/99 -0800, aphro wrote: > > >On Tue, 9 Nov 1999, Art Lemasters wrote: > &gt...

https://lists.debian.org

Default TCP Port List

Default TCP Ports. TCP 0 Reserved TCP 1 Port Service Multiplexer TCP 2 Management Utility TCP 3 Compression Process TCP 4 Unassigned TCP 5 Remote ...... TCP 9537 Remote man server, testing TCP 9594 Me...

http://www.planetlinks.com

網路簡介與指令

網路簡介與指令. 網路位址與等級. 現今Internet 網路中,主機與主機間的聯繫大都以 TCP/IP 協定進行溝通。而在 TCP/IP 網路環境裡,每一台已連線的電腦主機均有其特定唯一的位址,稱之為IP Address;目前全世界所使用的IP Address 規格為 Ipv4 (將來可能改為Ipv6,共 16 個位元組長),每一個 IP 位址由四個位元組 (32-bits) 的二 ....

http://120.105.184.250

ICMP port number? - TechExams

ICMP (ping, trace)is a layer 3 protocol suite within the TCP/IP suite, doesnt test any layer 4 or above functions, therefore, it has no TCP/UDP layer 4 port .... Default Layer 3 protocol/port identif...

http://www.techexams.net