odt controller
Memory controller's signals are propagated on signal line. Figure 3-1 ODT and Reflected Signals. 3.1 ODT features. DDR2 SDRAM embeds the termination ... ,CAS_n, WE_n and the address bus (Control signals CKE, ODT, CS_n are not checked) ... DRAM's ODT termination value used and the DRAM controller's driver ...
相關軟體 doPDF 資訊 | |
---|---|
![]() odt controller 相關參考資料
Memory Systems: Cache, DRAM, Disk - 第 428 頁 - Google 圖書結果
The time interval to switching ODT control from rank to rank. Figure 11.19 tRAS Row Access Strobe. The time interval between row access command and data ... https://books.google.com.tw ODT - DigChip
Memory controller's signals are propagated on signal line. Figure 3-1 ODT and Reflected Signals. 3.1 ODT features. DDR2 SDRAM embeds the termination ... http://application-notes.digch TN-40-40: DDR4 Point-to-Point Design Guide - Micron ...
CAS_n, WE_n and the address bus (Control signals CKE, ODT, CS_n are not checked) ... DRAM's ODT termination value used and the DRAM controller's driver ... https://www.micron.com Technical Data Sheet - Micron Technology, Inc.
ODT may be the most significant feature included on DDR2 SDRAM. ... controller changes its ODT value to 75Ω; DRAM 1 ODT is off, and DRAM 2 is set to 50Ω. https://www.micron.com TN-04-54: High-Speed DRAM Controller Design - Micron ...
The calibration process uses the programmable impedance control (PIC) circuit to calibrate both the output impedance and the ODT impedance. The PIC circuit ... https://www.micron.com On Die Termination Calibration - Rambus
The ODT calibration controller, compares the voltage drop across the ODT resistor network with a voltage drop across an external resistor represented. https://www.rambus.com ODT (On-Die Termination) - ISSI
ODT interface between SRAM controller and QUADP/DDR-IIP. ODT Options of QUADP/DDR-IIP: ISSI's QUADP and DDR-IIP products feature ... http://www.icsi.com.tw 聊一聊DDR3中的ODT(On-die termination) | 程式前沿
The ODT feature is designed to improve signal integrity of the memory channel by allowing the DRAM controller to independently turn on/off ... https://codertw.com On-die termination - Wikipedia
On-die termination (ODT) is the technology where the termination resistor for impedance ... Where an on-die termination value control circuit exists the DRAM controller manages the on-die termination ... https://en.wikipedia.org DRAM technical introduction_图文_百度文库
OCD (Off Chip Driver): The Strength control function of Pull-up / Pull-down I/O driver. ? Note 2. ODT (On Die Termination): The termination function (VTT/RTT) on ... http://wenku.baidu.com |