fortiap bridge mode

On the remote FortiGate wireless controller, the WiFi SSID is created with the Bridge with FortiAP Interface option sele...

fortiap bridge mode

On the remote FortiGate wireless controller, the WiFi SSID is created with the Bridge with FortiAP Interface option selected. In this mode, no IP addresses are ... ,当大规模部署FortiAP时,往往同一个SSID下接入终端数量比较大,为了减小广播域提高WIFI网络性能,通常需要通过VLAN做二层隔离。FortiOS 5.4提供VLAN pool ...

相關軟體 FortiClient 資訊

FortiClient
FortiClient 是一個免費的終端保護套件,包括惡意軟件 / 病毒檢測,rootkit 刪除,家長網絡控制和 VPN。使用來自 Fortinet FortiGuard 實驗室的更新的威脅情報和定義來檢測惡意軟件。家長控制提供了一個簡單而有效的方法來阻止惡意和明確的網站。單一 VPN 配置允許通過 IPSec 或 SSL 協議進行快速簡單的安全遠程訪問。利用由 Fortinet 內部開發的 F... FortiClient 軟體介紹

fortiap bridge mode 相關參考資料
Configuring a FortiAP local bridge (private cloud-managed AP)

Block-Intra-SSID Traffic is available in Bridge mode. ... During such an outage, clients already associated with a bridge mode FortiAP unit continue to have ...

https://docs.fortinet.com

FortiAP local bridging (Private Cloud-Managed AP)

On the remote FortiGate wireless controller, the WiFi SSID is created with the Bridge with FortiAP Interface option selected. In this mode, no IP addresses are ...

https://help.fortinet.com

FortiAP VLAN pool功能介绍(Local bridge模式SSID) - Fortinet ...

当大规模部署FortiAP时,往往同一个SSID下接入终端数量比较大,为了减小广播域提高WIFI网络性能,通常需要通过VLAN做二层隔离。FortiOS 5.4提供VLAN pool ...

http://wen.fortinet.com.cn

FortiAP橋接模式及通道模式設定– USO技術文檔

環境架構:. 首先設定FORTINET防火牆. 1.重置防火牆設定. 2.重開後設定語言. 3.設定防火牆LAN IP 172.16.10.1. 4.連接FORTIAP console 設定IP及 ...

http://wp.uso.com.tw

FortiGate+FortiAP設定問題 - iT 邦幫忙::一起幫忙解決難題,拯救 ...

想請問各位先進一個小問題~. 我目前用FortiGate60D + FortiAP221C的組合去搭建無線的環境。 利用SSID設定切開內部使用的WIFI用bridge方式綁定,外部使用的 ...

https://ithelp.ithome.com.tw

Setting up a WiFi Bridge with a FortiAP - Fortinet ...

You can configure a FortiAP unit in either Tunnel (default) or Bridge mode. In Bridge mode, the Ethernet and WiFi interfaces are connected (or bridged) to allow ...

https://docs.fortinet.com

Setting up a WiFi bridge with a FortiAP – Fortinet Cookbook

In this example, a FortiAP unit is connected to and managed by a FortiGate unit in Bridge mode. You can configure a FortiAP unit in either ...

https://cookbook.fortinet.com

Using a FortiAP in bridge mode to add wireless access

You can configure a FortiAP unit in either Tunnel mode or Bridge mode. When a FortiAP is in Tunnel mode, a wireless-only subnet is used for wireless traffic.

http://cookbook.fortinet.com

[FortiAP] To Start Using FortiAP with FortiGate Controller ...

[FortiAP] To Start Using FortiAP with FortiGate Controller / Bridge Mode and Tunnel ... You should give permission to a new FortiAP and allow it to contact with ...

https://blog.elogy.org