confreg 0x2142
*configuration Register<類似MS的註冊機碼> Cisco的註冊機碼; ... (config)#config-register 0x2102 <預設> 改成 ... -->RomMon 1 > Confreg 0x2142 -->RomMon 2 ... ,Result: This one does not work. confreg=0x2142 and that command is accepted by the switch but it does not tell us that we have to restart to make the changes.
| 相關軟體 Cisco Packet Tracer 資訊 | |
|---|---|
 confreg 0x2142 相關參考資料
What does the command confreg 0x2142 provide? | CCNA ...
What does the command confreg 0x2142 provide? A) It is used to restart the router, B) It is used to bypass the configuration ... https://www.sawaal.com DAY16-Cisco 設備開機與救援 - iT 邦幫忙 - iThome
*configuration Register<類似MS的註冊機碼> Cisco的註冊機碼; ... (config)#config-register 0x2102 <預設> 改成 ... -->RomMon 1 > Confreg 0x2142 -->RomMon 2 ... https://ithelp.ithome.com.tw unable to recover the password using confreg=0x2142 on ...
Result: This one does not work. confreg=0x2142 and that command is accepted by the switch but it does not tell us that we have to restart to make the changes. https://community.cisco.com Password Recovery Procedure for the Cisco 2900 Integrated ...
2014年5月2日 — Type confreg 0x2142 at the rommon 1> prompt in order to boot from ... datak9 Permanent datak9 Configuration register is 0x2102 Router> ! https://www.cisco.com Use of the Configuration Register on All Cisco Routers - Cisco
2020年6月25日 — 16384K bytes of processor board System flash (Read ONLY) Configuration register is 0x2142. If you cannot establish a console session, or if ... https://www.cisco.com 在所有Cisco路由器上使用配置寄存器
使用config-register命令，配置寄存器可以从配置模式设置。 ... (Read ONLY) Configuration register is 0x2142 (will be 0x2102 at next reload). 新的配置寄存器设置 ... https://www.cisco.com 0x2142 密碼變更 - 初學者
2012年3月20日 — 2. 將組態暫存器的值由預設的0x2102 變更為0x2142 monitor: command "boot" aborted due to user interrupt rommon 1 > confreg 0x2142 3. http://enconfigure.blogspot.co 【CCNA】Cisco Router 忘記密碼- 密碼復原@ 黃昏的甘蔗 ...
將組態暫存器的值由預設的0x2102 變更為0x2142，指令為. rommon 1 > confreg 0x2142. 3. 使用reset 指令重新載入IOS，重載的IOS會因0x2142 的值而 ... https://blog.xuite.net Cisco Router 重設密碼@ ~累積生活中的智慧~! :: 隨意窩Xuite日誌
輸入Confreg 0x2142 來設定待會開機跳過讀取設定檔(startup-config). 輸入reset 來讀取IOS. 跳過讀取設定檔，所以系統會問是否要使用互動式設定Router，因為要 ... https://blog.xuite.net Solved: Password recovery - confreg 0x2142 doesn't work ...
Solved: Hi, On a Cisco 7600 with SUP720-3BXL the password recovery procedure doesn't work. In rommon I try to use the configuration Register to boot without ... https://community.cisco.com |