8051 djnz

CPL - Complement Register; DA - Decimal Adjust; DEC - Decrement Register; DIV - Divide Accumulator by B; DJNZ - Decremen...

8051 djnz

CPL - Complement Register; DA - Decimal Adjust; DEC - Decrement Register; DIV - Divide Accumulator by B; DJNZ - Decrement Register and Jump if Not Zero ,部分是屬於控制轉移類的指令,它包含JZ、JNZ、CJNE、DJNZ 等指令;第二部分為布林 ... 一個bit 進行控制,使8051 單晶片在使用上能有更大的彈性,屬於這個部分的 ...

相關軟體 Jnes 資訊

Jnes
Jnes 是 Windows PC 的 NES(任天堂娛樂系統)模擬器。它的仿真功能包括圖形,聲音,控制器,zapper 和許多內存映射板在大多數美國遊戲和一些流行的日本板添加國際喜悅.889​​97423 選擇版本:Jnes 1.2.1.40(32 位)Jnes 1.2.1.40( 64 位) Jnes 軟體介紹

8051 djnz 相關參考資料
8051微電腦單晶片實習 - 大甲高工

8051 單晶片實習----E0903廣告燈. 1/1/97. 17. 指令介紹: DJNZ R0,LOOP. DJNZ R0,LOOP. 將R0 內部暫存器內的數字減1,再判斷是否為0; R0 內部暫存器內的 ...

http://www.tcvs.tc.edu.tw

8051 Instruction Set

CPL - Complement Register; DA - Decimal Adjust; DEC - Decrement Register; DIV - Divide Accumulator by B; DJNZ - Decrement Register and Jump if Not Zero

https://www.win.tue.nl

常用指令排行榜(四) - 旗威科技有限公司Chipware Systems Inc.

部分是屬於控制轉移類的指令,它包含JZ、JNZ、CJNE、DJNZ 等指令;第二部分為布林 ... 一個bit 進行控制,使8051 單晶片在使用上能有更大的彈性,屬於這個部分的 ...

http://www.chipware.com.tw

基本程式範例

8051執行指令所需的時間Ti,可由查表得知(M個機械週期) ... 由指令表得知:MOV Rn, #direct需1個機械週期; DJNZ Rn, rel需2個機械週期; 選用外接震盪頻率為12 ...

http://www.ccut.edu.tw

8051指令@ 世哲的部落格:: 隨意窩Xuite日誌

若Rn不等於data跳至rel. 24. CJNE @Ri,#data,rel. 若Ri不等於data跳至rel. 24. DJNZ Rn,rel. Rn減1不等於0跳至rel. 24. DJNZ direct,rel. direct減1不等於0跳至rel. 24.

https://blog.xuite.net

8051 Instruction Set Manual: DJNZ - Keil

The DJNZ instruction decrements the byte indicated by the first operand and, if the resulting value is not zero, branches to the address specified in the second ...

http://www.keil.com

Re: [請益] 8051利用DJNZ迴圈寫程式- 看板Programming - 批踢踢實業坊

引述《wenher (Coke)》之銘言: : 請問利用DJNZ這個指令寫成1+2+3+4+....+49+50 : 再將總和儲存至暫存器R5,R6 我這樣寫的是對的嗎?? : : MOV ...

https://www.ptt.cc

迴圈:

用途:對於一段需重複執行特定次數的程式,可利用迴圈的形式來完成。 8051程式的寫法:. MOV R7,#N. LOOP: ;此段程式可執行N次. DJNZ R7,LOOP ;R7=R7-1, ...

http://faculty.stust.edu.tw

8051組語標名$的意思? | Yahoo奇摩知識+

最佳解答: DJNZ R7,$ 等於: AAA: DJNZ R7, AAA $ 指目前PC 的值, 所以 " 跳到目前指令" 就是"再" 執行一次目前的指令的意思啦~~ 2008-01-24 10:40:37 補充:

https://tw.answers.yahoo.com

關於8051組合語言~ | Yahoo奇摩知識+

DJNZ R7,$2 ; R7 = R7-1 ;如果R7>< 0;跳到標記為$2的地方. DJNZ R6,$1 ... DJNZ R5,DELAY; R5 = R5 - 1 ;如果R5>< 0;跳到標記為DELAY的地方

https://tw.answers.yahoo.com