Wireshark (64-bit) 歷史舊版本 Page35

更新時間：2018-12-13
更新細節：

What's new in this version:

New Features:
- Added new Serato Play Expansion Pack
- Added streaming support for SoundCloud Go+
- Added streaming support for TIDAL
- Added post-fader effects for Rane Seventy-Two (Firmware update required)
- Added fader start for Rane Seventy-Two (Firmware update required)
- Added beat jump controls to Rane Seventy-Two screen (Firmware update required)
- Added reverse for Rane Twelve (by pressing Cue Mode + Play/Pause)
- All 14 day Free Trials have been reset

Other Changes:
- Fixed an issue where Relocate Lost Files would not work
- Fixed an issue where library tags are required to be rescanned
- Fixed an issue causing frames to drop during Serato Video recording
- zFixed an issue where full scale tracks would show clipping (red) channel VU meters incorrectly
- Adjusted pitch nudge +/- buttons to be the same orientation as pitch sliders in extended view
- Fixed an issue turning iTunes OFF and ON would hide BPM or Key tags in the library
- Fixed an issue with 2018 MacBook Pros where no audio would output if headphones are connected before opening Serato DJ Pro
- Fixed an issue changing the deck layer on Denon DJ SC5000/Rane Twelve would stop active video recording
- Fixed an issue changing the deck layer on Denon DJ SC5000 will stop an active recording
- Fixed an issue where if a track has blank "artist" Key and BPM would not display on Rane Seventy-Two
- Fixed an issue with Pitch, Nudge and Range controls missing when MIDI mode was enabled
- Fixed an issue with AM Mode missing track/artist info on left deck
- Fixed an issue loading tracks to the prepare panel with the Rane Seventy-Two
- Fixed an issue where the Serato DJ Pro logo would show incorrectly
- Fixed an audio smoothing issue with Rane Twelve when scratching at a slow speed
- Fixed an issue with FX paddles incorrectly engaging on Rane Seventy-Two
- Fixed an issue where Rane Seventy-Two screen would not update Sync state
- Fixed an issue where AUX channel not available in GUI after power cycle on Rane Seventy-Two
- Fixed a drawing anomaly in the Setup screen
- Fixed a potential hang on exit

更新時間：2018-12-06
更新細節：

What's new in this version:

Release Notes:

Beta Channel:
- Added a new Preference to opt-in to the beta release programme
- For more info, see this FAQ

Updated macOS IDE's Mono version:
- The installer will now try to download and use v5.10.1.57 - if you have to install Mono manually, please install this version first
- Fixes a number of issues with building large projects in the Mac IDE - please note that we are aware these large projects currently build very slowly using the Mac IDE
- Also stops Mojave warnings that GMS2 is not optimised for Mojave and/or uses old components
- Note: Asset compiler errors are no longer shown as a dialog, now an .saencryptedreport file is written to a location specified in your Output Window - attach this to a Helpdesk ticket instead

Systems for avoiding project-saving issues:
- Changed the way saving is done, so we now save to a temporary location, then attempt to modify/remove the old files (a few times, if required), only throwing an error if the files continue to be locked externally
- Note: Reduces likelihood of issues for users who have agressive antivirus/anti-malware software or still continue to use OneDrive/Dropbox/Google, etc., folders for working on their projects
- Note: Also means if saving does fail it will only be the temp new files which are affected and your originals are still there, with the recent changes still in memory, so you can try saving again
- Fixed a number of project-saving and stability issues with the resource tree, especially if you had created custom tree views in your projects
- Added a new system to detect projects which have been corrupted by this issue and GMS2 will now offer to fix the project for you during a project load
- Note: We would suggest choosing "No", then immediately closing GMS2 and taking a backup of the project first, then load the project again and say "Yes"
- Added extra logging into ui.log for when your machine has access permissions issues with GMS2's files/folders or if tools have been lost from your GMS2 installation

Android Adaptive Icons Support:
- Added Game Options > Android > Adaptive Icons for generating new icons or importing existing ones
- Use the foreground/background pickers and the Generate button at the top of the page to create icons and view them in the mask preview area
- Scroll down the page if you want to import existing icons instead, then they will appear in the mask preview area too
- Note that this feature requires you to be using a 2.2.1+ runtime also, otherwise the icons won't end up in your .apk

Fixes for Ctrl+Shift+F:
- Fixed a variety of bugs with this tool
- Added the ability to select text in output windows, the debugger, etc., and Ctrl+Shift+F will use this string
- Fixed Ctrl+F so it moves the cursor to the first match after the current caret location, not the first match in the file

Misc:
- Preferences: Added new Workspace background stretch mode - Screen Stretch. Resizing left/right docks won't cause your wallpaper to move also. Is now the default if you have not set this Preference previously
- Game Options: Changed Main > Game Speed to default to 60fps in new projects, not 30
- Game Options: Removed the checkbox for MOGA Gamepads from Android, as this is no longer relevant in 2.2.1+ runtimes, as we have changed the gamepad integration
- Game Options: Added a checkbox into iOS > Social for whether you want Push Notification support included in your game or not
- Game Options: Added a checkbox into iOS to control whether you want the iPhone X home bar to require a double-tap to wake, rather than a single-tap
- Game Options: Removed the architectures for MIPS and ARMv5 from Android, as these are no longer supported by Google in their current build tools
- Object Editor: Can now press Delete on an event to remove it
- Object Editor: Fixed an issue with some inherited instance variable values not being shown correctly when in the room editor
- Code Editor: Added new DnD nodes for "Get Draw Font" and "Get Text Alignment"
- Resource Tree: Fixed an issue which could cause the tree to be locked in "reorder mode" when clicking off a resource to confirm a rename
- Resource Tree: Fixed an issue where cloning the Default view would leave the resource tree blank

Bugs:
- There are a lot of bugs fixed in the IDE and the runner for this release, so we would strongly recommend you check the change log pages and be aware of anything which applies to your project(s)
- See the bug database's Change Log for the list of public issues fixed in this version
- Known Issues can be found on the bug database also - for the current IDE headline list see this page

更新時間：2018-11-29
更新細節：

What's new in this version:

New:
- The Windows installers now ship with Qt 5.9.7. Previously they shipped with Qt 5.9.5

Bug Fixes:
The following vulnerabilities have been fixed:
- The Wireshark dissection engine could crash
- The DCOM dissector could crash
- The LBMPDM dissector could crash
- The MMSE dissector could go into an infinite loop
- The IxVeriWave file parser could crash
- The PVFS dissector could crash
- The ZigBee ZCL dissector could crash

The following bugs have been fixed:
- VoIP Calls dialog doesn’t include RTP stream when preparing a filter
- Wireshark installs on macOS with permissions for /Library/Application Support/Wireshark that are too restrictive
- Closing Enabled Protocols dialog crashes wireshark
- Unable to Export Objects → HTTP after sorting columns
- DNS Response to NS query shows as malformed packet
- Encrypted Alerts corresponds to a wrong selection in the packet bytes pane
- Wireshark crashes/asserts with Qt 5.11.1 and assert/debugsymbols enabled
- ESP will not decode since 2.6.2 - works fine in 2.4.6 or 2.4.8
- Text2pcap generates malformed packets when TCP, UDP or SCTP headers are added together with IPv6 header
- Wireshark tries to decode EAP-SIM Pseudonym Identity
- Infinite read loop when extcap exits with error and error message
- MATE unable to extract fields for PDU
- Malformed Packet: SV
- OPC UA Max nesting depth exceeded for valid packet
- TShark 2.6 does not print GeoIP information
- ISUP (ANSI) packets malformed in WS versions later than 2.4.8
- Handover candidate enquire message not decoded
- TShark piping output in a cmd or PowerShell prompt stops working when GeoIP is enabled
- ICMPv6 with routing header incorrectly placed
- IEEE 802.11 Vendor Specific fixed fields display as malformed packets
- Text2pcap -4 and -6 option should require -i as well
- Text2pcap direction sensitivity does not affect dummy ethernet addresses
- MLE security suite display incorrect
- Message for incorrect IPv4 option lengths is incorrect
- TACACS+ dissector does not properly reassemble large accounting messages
- NLRI of S-PMSI A-D BGP route not being displayed

Updated Protocol Support:
- BGP, DCERPC, DCOM, DNS, EAP, ESP, GSM A BSSMAP, IEEE 802.11, IEEE 802.11 Radiotap, IPv4, IPv6, ISUP, LBMPDM, LISP, MLE, MMSE, OpcUa, PVFS, SLL, SSL/TLS, SV, TACACS+, TCAP, Wi-SUN, XRA, and ZigBee ZCL

New and Updated Capture File Support:
- 3GPP TS 32.423 Trace and IxVeriWave

New and Updated Capture Interfaces support:
- Sshdump

Vendor-supplied Packages:
- Most Linux and Unix vendors supply their own Wireshark packages. You can usually install or upgrade Wireshark using the package management system specific to that platform. A list of third-party packages can be found on the download page on the Wireshark web site.

File Locations:
- Wireshark and TShark look in several different locations for preference files, plugins, SNMP MIBS, and RADIUS dictionaries. These locations vary from platform to platform. You can use About→Folders to find the default locations on your system.

Known Problems
- The BER dissector might infinitely loop
- Capture filters aren’t applied when capturing from named pipes
- Filtering tshark captures with read filters (-R) no longer works
- Application crash when changing real-time option
- Wireshark and TShark will display incorrect delta times in some cases
- Wireshark should let you work with multiple capture files

更新時間：2018-10-12
更新細節：

What's new in this version:

Bug Fixes:

The following vulnerabilities have been fixed:
- wnpa-sec-2018-47
- MS-WSP dissector crash
- wnpa-sec-2018-48
- Steam IHS Discovery dissector memory leak
- wnpa-sec-2018-49
- CoAP dissector crash
- wnpa-sec-2018-50
- OpcUA dissector crash

The following bugs have been fixed:
- HTTP2 dissector decodes first SSL record only
- Undocumented sub-option for -N option in man page and tshark -N help
- Mishandling of Port Control Protocol option padding
- MGCP: parameter lines are case-insensitive
- Details of 2nd sub-VSA in bundled RADIUS VSA are incorrect
- Heuristic DPLAY dissector fails to recognize DPLAY packets
- gsm_rlcmac_dl dissector exception
- dfilter_buttons file under user-created profile
- Filter buttons disappear when using pre-2.6 profile
- PROFINET Information element AM_DeviceIdentification in Asset Management Info block is decoded wrongly
- Hw dest addr column shows incorrect address
- Windows dumpcap -i TCP@<ip-address> fails on pcapng stream
- Wildcard expansion doesn’t work on Windows 10 for command-line programs in cmd.exe or PowerShell
- SSL Reassembly Error New fragment past old data limits

更新時間：2018-09-28
更新細節：

更新時間：2018-08-30
更新細節：

What's new in this version:

The following vulnerabilities have been fixed:
- wnpa-sec-2018-44. Bluetooth AVDTP dissector crash
- wnpa-sec-2018-45. Bluetooth Attribute Protocol dissector crash
- wnpa-sec-2018-46. Radiotap dissector crash

The following bugs have been fixed:
- Wireshark Hangs on startup initializing external capture plugins
- Qt: SCTP Analyse Association Dialog: Segmentation fault when clicking twice the Filter Association button
- Incorrect presentation of dissected data item (NETMASK) in ISAKMP dissector
- Decode NFAPI: CONFIG.request Error
- udpdump frame too long error
- ISDN - LAPD dissector broken since version 2.5.0
- ASTERIX Category 062 / 135 Altitude has wrong value
- Wireshark cannot decrypt SSL/TLS session if it was proxied over HTTP tunnel
- TLS records in a HTTP tunnel are displayed as "Encrypted Handshake Message"
- BTATT Dissector: Temperature Measurement: Celsius and Fahrenheit swapped
- Diameter AVP User Location Info, Mobile Network Code decoded not correctly
- Heartbeat message "Info" displayed without comma separator

Updated Protocol Support:
- ASTERIX, Bluetooth, Bluetooth ATT, Bluetooth AVDTP, DHCP, DTLS, E.212, FP, GSM A RR, HTTP, HTTP2, IEEE 802.11, ISAKMP, ISDN, K12, NFAPI, Nordic BLE, PFCP, Radiotap, SSL, Steam IHS Discovery, and TLS 1.3

New and Updated Capture File Support:
- pcapng

New and Updated Capture Interfaces support:
- ciscodump, udpdump

Known Problems:
- The BER dissector might infinitely loop
- Capture filters aren’t applied when capturing from named pipes
- Filtering tshark captures with read filters (-R) no longer works
- Application crash when changing real-time option
- Wireshark and TShark will display incorrect delta times in some cases
- Wireshark should let you work with multiple capture files

更新時間：2018-07-24
更新細節：

What's new in this version:

- Serato DJ Pro support for the Numark Party Mix controller
- Serato DJ Pro support for the Numark Party Mix Pro controller
- Fixed Pioneer DDJ-SB3 hang after successful installation on Windows
- Fixed audio issues with Windows 10 April 2018 update in practice mode / offline player

更新時間：2018-07-19
更新細節：

更新時間：2018-06-08
更新細節：

What's new in this version:

Pioneer DJ DDJ-SX3:
- Official Serato DJ Pro support for the Pioneer DJ DDJ-SX3, a powerful four-channel controller and standalone mixerIt is the third edition in the popular DDJ-SX series, utilising the Pioneer workflow to take advantage of the latest Serato DJ features.
- Dual USB ports
- Three mic inputs, with mic FX
- Sound color FX with Echo, Filter, Noise and Jet options
- RGB performance pads with 11 performance modes
- Serato Pitch 'n Time DJ and Flip licenses included, with dedicated hardware controls
- Paid upgrade to Serato DVS

Rane SEVENTY-TWO:
- A premium 2-channel mixer built for the professional club and scratch DJ, the Rane SEVENTY-TWO unlocks Serato DJ Pro and DVS.
- .3-inch touchscreen to display Serato’s waveforms and control your library and FX.
- Adjustable MAG THREE cross and upfaders
- Dual FLEX FX engines, one for each channel
- Dual die-cast aluminum FX paddles
- RGB performance pads to control Serato DJ Pro pad modes
- Dual USB ports
- Assignable USB controller inputs for the Rane TWELVE motorized battle controller

Rane TWELVE:
- Official Serato Accessory support for the Rane TWELVEA motorized DJ controller with 12” vinyl platters.
- Replicates the look and feel of a turntable, but eliminates the need for needles and tone arms.
- Multi-function touch strip for track searching and setting or triggering hot cues.
- Each TWELVE has four separate layers of deck control (hardware dependent)
- USB can be connected directly to the SEVENTY-TWO or your computer
- .0 kfcm high-torque motor with adjustable high/low option
- /16/50% adjustable pitch slider

Practice Mode:
- Practice Mode allows you to DJ for free on your laptop with no hardware plugged in.
- Free for anyone to download
- Easy to use and has all the features required for learning to mix
- deck player with onscreen crossfader
- Access to Cues and Loops
- Sync with onscreen pitch slider/BPM adjust
- Full functionality with your crates and iTunes library
- Access to Serato Help and Support from within the interface
- New UI with Performance Pad view
- Serato DJ Pro has refreshed user interface, along with a new Performance Pad view.
- Display your cue points in a new but very familiar layout
- This new layout will make planning and performing your routines more efficient

Optimised for high resolution screens:
- Serato DJ Pro has been optimised for high definition Retina, 4K and UHD displays.
- Experience a refined look and feel with Hi-DPI screen support and scalable interface

Bigger Libraries and rock-solid reliability:
- Serato DJ Pro includes 64-bit support which dramatically increases power and reliability.
- The size of your library now has virtually no limits
- If you have a huge number of crates and thousands of songs, you will be able to search for them and load the tracks even faster

Improved help and support:
- Serato DJ Pro includes a new and improved Help and Support section.
- Includes tooltips, shortcut keys and tutorials
- The option to contact our support team, and the ability to search our knowledge base in-app

更新時間：2018-05-22
更新細節：

What's new in this version:

New:
- The Windows installers now ship with Qt 5.9.5. Previously they shipped with Qt 5.9.4

Bug Fixes:
- The LDSS dissector could crash
- The IEEE 1905.1a dissector could crash
- The RTCP dissector could crash
- Multiple dissectors could consume excessive memory
- The DNS dissector could crash
- The GSM A DTAP dissector could crash
- The Q.931 dissector could crash
- The IEEE 802.11 dissector could crash
- Multiple dissectors could crash

The following bugs have been fixed:
- Qt GUI does not snap to exactly half of screen in Windows
- Segmentation fault when switching profiles
- QUIC dissector produces incorrect packet numbers (wrong-endian)
- Wrong default file format chosen in when saving a capture with comments added if the original format doesn’t support comments
- Lua: Error during loading [AppData directory]:1: bad argument #1 to dofile (dofile: file does not exist)
- Crash when selecting text
- ui/macosx directory missing from source release tarball
- Wireshark 2.9.0 snapshot crashes/segfaults on Windows when launched with -k or -i
- "Copy as printable text" isn’t copying non-alphanumeric characters
- File missing from release tarball
- NEWS is out of date and does not display properly in Notepad
- l16mono.so is installed in the wrong place
- Remove: HACK to support UHD’s weird header offset on data packets
- WinSparkle 0.5.6 is out of date and is buggy
- Unable to create or open VOIP captures
- RTMPT: incorrect dissection of multiple RTMP packets within a single TCP packet
- Endpoints dialog displays invalid GeoIP information due to incorrect byte order
- Qt: Crash in ShowPacketBytesDialog()
- Statistics ? Resolved addresses show IP addresses without domain
- Erroneous MAC-LTE Dissection for Sidelink Shared Channel Packets
- Files missing from docbook CMake file
- Wireshark hangs when opening certain files if it’s been configured to use the new GeoIP data
- The “Open”, “Save”, and other file dialogs should now be shown at the correct size on HiDPI Windows systems

Updated Protocol Support:
- BATADV, BT LE LL, CoAP, DNS, DTLS, GSM A DTAP, GSM A GM, GTP, GTPv2, IEEE 1905.1a, IEEE 802.11, LDSS, LwM2M-TLV, MAC LTE, NAS EPS, Q.931, RTCP, RTMPT, SDP, TCP, and VITA 49
- New and Updated Capture File Support
- 3GPP TS 32.423 Trace and Android Logcat
- New and Updated Capture Interfaces support