Syncovery 歷史舊版本 Page39

更新時間：2021-10-12
更新細節：

What's new in this version:

Fixed:
- The MAME high scores window had not been updated to work properly with the new dialog theme colors, and thus was not properly readable (introduced in 12.0)
- The updated Add/Edit Emulator window was not offering to change the emulator for affected games (introduced in 12.0)

更新時間：2021-10-11
更新細節：

What's new in this version:

vMix 24.0.0.72
- Replay DUR display now factors in transition time when multiple events selected
- Replay remaining time now factors in transition times
- ReplaySelectAllEvents would not work properly with subsequent shortcuts
- Fix for SQ and LQ replay quality settings resulting in lower than expected quality after some time
- MultiCorder Timeline filename now matches recording filename format


vMix 24.0.0.71
- Fixed rare race condition when closing an NDI input connected to NewBlue Titler Live. May cause spurious clock values to appear.
- Splash screen now 50% sharper


vMix 24.0.0.70
Fixed:
- potential audio hiccups during replay transitions at 50p/25p frame rates
- ReplayLastEvent shortcut not working correctly
- wrong angle in replay activators on channel b when in A|B mode
- incorrect input sometimes displayed in Edit Activator


vMix 24.0.0.66
- new default Dark Mode for vMix Social Web Interface, link at bottom of vMix Social Web Interface page is available to switch back to light mode if needed
- new Twitter streaming destination. Periscope is now discontinued and replaced with direct Twitter streaming. Users who currently use Periscope/Twitter destination
- Will need to login again and configure a stream title
- Support for newer VST3 plugins such as new NDI5 tools
- Improved Tally light support for Sony VISCA over IP cameras

Fixed:
- duplicated text when loading GT tickers from presets
- error message opening MultiCorder when a non-supported stream is added to vMix
- issue where disconnecting PTZ on one Sony VISCA camera disconnects them all


vMix 24.0.0.63
- Fix for missing fonts at end of dropdown list in GT Designer
- Adding warning when enabling Fault Tolerant on recording, as it has a number of limitations that operators should be aware of
- Fixed vMix AVI in Instant Replay not able to be converted to MOV in vMix Media Converter
- Fixed Select Case in scripting not working if indented/formatted


vMix 24.0.0.62
- Fixed issue with YouTube Stream Now login caused by recent security updates


vMix 24.0.0.61
- Fixed issue when changing Input Frame Delay, that may cause the input to stop or corrupt memory


vMix 24.0.0.60
- Updated Twitch login for both vMix and vMix Social due to new browser policy on Twitch
- Fixed infinite loop possible when setting Dynamic input to itself
- Fixed TCP API tally showing incorrect numbers for inputs both in output and overlay at same time
- TCP and Web API are now locked down by default with some enhanced security measures


vMix 24.0.0.59
- Updated SRT library to latest 1.4.3. This fixes a crash issue in the library when some versions of VLC attempt to connect
- Added support for "Select Case" in VB.NET scripting
- Instant Replay Export progress bar may not have updated correctly for combined clips
- Instant Replay Export will now encode much faster to MP4 if replay recording is stopped
- Fix for issue where if some replay sources have no audio they would take a long time to export alongside other angles with audio


vMix 24.0.0.58
- Incorrect colour space may have been applied to WebM alpha videos and ProRes 444 videos
- Local scripts were not being removed with Remove button
- Activators for replays 5-8 were not working correctly
- Older GT titles with stray animations may not have played back correctly when removing animations from them


vMix 24.0.0.57
- NDI FEIM checkbox was not being saved in a preset
- Going to Previous video in a List input using shortcut or back button would not jump over disabled items in the list
- Web Controller buttons may look incorrect if the name of the shortcut button was long
- Virtual sets would not load the default angle correctly when opened from preset
- Double checks for multiple instances of vMix running, as accidentally double/triple clicking on start bar icon may not have been detected previously
- Fixed distorted borders when using in NDI inputs not yet connected


vMix 24.0.0.56
- New WebM support including Alpha Channel. Note: heavily compressed files like WebM use more CPU than larger but lightly compressed formats like MOV. So WebM support has been added for convenience, but do not expect it to perform better than image sequences and MOV.
- New Audio Gap Handling feature added in Settings - Audio. Provides alternative option instead of audio "drops" where audio source is slightly slower than the computer.
- Fix for audio alerts not calculating correctly and may display even if there was audio in the past x seconds
- Improved vMix Call audio sync slightly
- Frame Rate setting can now be adjusted without unticking Use Streaming Settings in Settings -> External Output, as it is not controlled by streaming settings, only resolution is.
- SRT library was not updating correctly in 24 and was still version 1.4.0. Latest version 1.4.2 now installs correctly.
- Fixed replay showing live previews too early, leading to flicker at end of events playback
- Fixed SRT outputs not starting up again when restarting vMix due to settings changes
- Fixed preset folder not showing the correct folder on save when opening presets directly by double clicking the files


vMix 24.0.0.52
- Added support for 100p and 200p frame rates
- Fix for incorrect animation when transitioning in to a new Title on an Overlay channel while the animation of the previous title was still in progress
- Fix for Mix input Cut shortcut not always working when using multiple mix inputs at a time
- Fix for error when loading Instant Replay when Display Mode is set to Legacy in Settings -> Performance. We strongly recommend this be changed
- To Auto however, as Legacy has performance issues on modern machines
- Added Channel parameter support to Scripting
- Running script duration is incorrect when multiple scripts are running at a time


vMix 24.0.0.51
- If events are playing back, replay will no longer jump to the frames of newly created events, which would end playback of events in the process
- Fix for issue with Sony VISCA over IP connection hanging in situations where another app or NDI is already using the protocol
- When switching to a GT title in Overlay stinger settings, vMix will now reset the duration and cut times to 0, as the timing from the GT title is used directly


vMix 24.0.0.50
- Added alert for not recording!
- Fixed issue with shortcut MoveMultiViewOverlay when used in Triggers with borders enabled
- Shortcut function search now has focus, so you can start typing without needing to click the search box


vMix 24.0.0.49
- Fixes VST3 issue in .47 and .48

更新時間：2021-10-05
更新細節：

What's new in this version:

- Fixed invalid error messages from appearing in Output Settings when the user is authenticated to YouTube

更新時間：2021-10-03
更新細節：

What's new in this version:

New Features:
- Major improvements in support of chart styles
- Ability to Resolve all comments
- Change list symbols render
- Add chart styles for users with visual impairment
- Add ability to use tabshift+tab in some controls
- Ability to view unique user link count on info page
- Improved render of CJK fonts in PDF files

Document Editor:
- Ability to convert text to table
- Ability to convert table to text
- Auto-capitalize first letter
- New review mode: Simple markup

Spreadsheet Editor:
- Ability to add/remove/edit conditional formatting
- Ability to add sparklines
- Change select by pressing tab + enter
- Data import from txt, csv
- Add setting for hyperlink auto-correction
- Freeze panes presets
- Setting for show zeros in cells
- Chain comments support
- Add argument names to function wizard

Presentation Editor:
- Version History
- Ability to hide notes panel
- Auto-capitalize first letter

Fixed:
- All components received countless fixes

更新時間：2021-09-25
更新細節：

更新時間：2021-09-03
更新細節：

更新時間：2021-08-31
更新細節：

What's new in this version:

Arena DMX Spanning:
- When working with LED strips or a lot of fixtures you had to manually manage multiple DMX universes in the Advanced output of Arena. But not anymore! with version 7.5 Arena will automatically create as many universes as you like. This is huge time-saver when working with many DMX universes.

Wire:
- This version of Wire comes with several cool new features, such as auto-repeat for instance counts, interpolated Read, multi-pass ISF, MIDI Program Change nodes and a Trim node. All MIDI and OSC nodes are now instanceable and with more alignment tools you can easily make your patches more organized and readable.

Arena & Avenue Fix List:
- Crash setting FFGL source FFT input to local
- Crash handling Directshow capture sometimes
- Crash waking machine from sleep with Lumiverse output
- Crash trying to register on old drivers or unsupported GPU
- Preview stops playing when moving the previewed clip
- This column shortcuts are lost from earlier versions
- Keyboard navigation no worky in Avenue Effects, and Sources panels
- Flashing noise at the end of very short clips
- "This column" target option missing for group columns
- Moving a colour of a palette and then clicking on it shows the wrong colour
- Clicking red in the default palette the first time, loads black instead
- Undoing clip move to create new column, keeps columns if you switch to a different decks and start to undo there
- Clip preview midi shortcut triggers preview also on note off
- Playhead position of incoming and outgoing OSC-messages different
- Scrubbing playhead in transport control range limited when in-/out-points are changed
- Pasting ASS Output mask no worky
- Restart Param set to Clip trigger, on BPM synced clip when hitting resync
- Reverse Advanced output mouse selection order
- Make Clip speed slider dingetje arrows adjust in finer steps
- /composition/layers/*/clips/*/transport/position/behaviour/duration/multiply can make Resolume freeze if it sets play speed very fast
- Clip Preview gets disconnected when clearing layer or on Piano trigger clip disconnect
- Can't animate Wire layer choice mixer params sometimes
- List / insert Fixtures in alphabetical order
- Metaballs grid in should be an integer
- New composition with Persistent source in column 1, deck 2, and 3 only have 1 column
- Keystone effects show grid at wrong position

Alley Fix List:
- Alley's factory DXV presets all use Normal Quality with Alpha format
- Wire Fix List:
- Add 1/2 Patch Size and 1/4 Patch Size resolution options
- Connect actions that cause loss of input constant values are not undone.
- Store output routing selection in patch and enable output if possible on patch load
- Slice Render should scale according to its resolution attribute
- Getting instanced, inlets should inherit original inlet value
- Dragging a .isf resource to the patch create a new ressoure even if it already exist
- Saving patch with ISF the shader resets values if it has defaults in the code
- Inlet/Outlet inspectortje should also show multiline text, now it's all in one line
- ISF multipass implementation
- Give Toggle two trigger inlets to force the state
- Patch with Russian and weird characters in file name doesn't load on windows
- All inlets of Switch want to disconnect trying to instancing network with a trigger
- Screen Shake should rotate around center
- Add Max attribute on Linear node (to make loopable lists)
- Crash consolidating patch with missing resource
- Double clicking .cwired with Resolume not running, and choosing cancel in the installation prompt makes Resolume freeze on startup
- Crash loading patch which has syphon output enabled, after a patch which had syphon output enabled
- Read OSC loses 'Address'-input when changing type
- Converge: Node that goes from event instances to single stream
- Crash connecting float to 1st inlet of greater after texture to 2nd inlet

更新時間：2021-08-24
更新細節：

更新時間：2021-08-17
更新細節：

What's new in this version:

Fixed:
- Added some missing translations for Titles feature
- WIRE-19206: Fixed issue where encoder presets were not appearing for some destinations in the Output Settings
- WIRE-19205: Changed the Duplicate Shot Option for Title to be checked by default (meaning it will create a new instance of the Title). This will only affect users who did not previously set Duplicate Shot Option preferences in 14.3.
- WIRE-19179: Audio mixers that support more than 16 channels of audio will no longer downmix all audio to channels 1-2 on macOS

更新時間：2021-08-04
更新細節：

What's new in this version:

New & Improved:
- New! Title Engine: New library of animated titles! Choose from over 25 (with more on the way!) high quality, customizable animated titles. Add your logo, change colors and fonts, and adjust timing of animations.
- New! Secondary Display Live Output Audio mapping: We now allow you to map Audio Tracks to Secondary Display Live Output.
- New! Media Playback in Live window: Control playback of media clips while they are Live.
- New! In/Out point selection: Editable text fields showing the current in & out point times of media.
- Improved! Trace Logs for better information when diagnosing issues.
- Improved! Integration with AverMedia Live Gamer BOLT GC555 capture cards.
- Improved! AVFoundation Source capture: Made some fundamental changes to the way we bring in AVFoundation sources to improve sync drift between USB devices.
- Improved! Countdown Clock: Added 60+minute display in Countdown Clock.
- Improved! Media File finder: Access the original file location of a media file from the context menu on the Shot Layers tab.
- Improved! Virtual microphone monitoring on Windows: We now really do allow monitoring of Wirecast Virtual Microphone audio on Windows 10.
- Improved! Updated technology, including: Facebook API to v10.0, WebRTC to 4430 (m90), and NDI SDK to v5

Fixed:
- A replay shot now scales properly with the replay templat
- Added ‘+’ and ‘–’ zoom buttons to work with PTZ NDI cameras that don’t have absolute positioning implemented
- Beta users may have noticed that titles were not retaining text/image changes when loading saved document or shot template. Now they do
- Twitch Ingest Server can now be changed, and selections are retained
- Fixed a crash that could occur when authenticating to Twitter/Periscope
- Renamed old Title sources to Title (Legacy)
- Multiviewer Configuration will now scale properly regardless of your monitor DPI, so that all layouts can be see
- Improved Performance of YUV converter needed for x264 encoder. Performance is improved by roughly 5x
- Audio Mixer Audio Track selection is now saved
- Wirecast no longer moves to a different monitor when Maximized->Minimized->Maximized on Windows OS
- Shortcuts assigned to number now work on numpad again
- Fixed a crash when using Twitter widget with certain UTF-16 characters
- Blackmagic SDI Input configuration will no longer get locked after switching from Automatic to Manual
- Made iOS video capture on Apple Silicon and Mac work better
- PTZ Preset Recall will now work more reliably when using a Playlist
- Now you can change the Audio Sample Rate of the Telestream System Audio Capture driver while Wirecast is capturing without dire consequences
- Audio capture on Mac can now support various sample rates from the audio driver
- The ticker collecting bandwidth statistics now stops after a Rendezvous session is disconnected
- Fixed an issue that caused the playlist tab to not display correctly in certain circumstances
- Now you can use PTZ controls with more than one Sony PTZ camera in your document
- Fixed an issue that could cause an error message when outputting to YouTube, and in general improved error alert messages and logging for YouTube
- We added a proxy image to let you know that you have overly HUGE files, and we are automatically downsizing them to a more appropriate size. This will only happen the first time you open an existing document
- Fixed Window Screen Capture on Mac where in some instances it was unable to follow window changes
- Fixed an issue where you couldn't activate a license if you had no internet connection
- Transitioning between a shot with an audio source and a playlist with media no longer removes any of the Audio FX settings
- MOV and MP4 recordings no longer have incorrect file creation date
- Encoder preset dimensions now continue to update even after invalid dimensions are provided
-- Updated to work better in situations where we detect an audio sample rate that is different than what the source is telling us they are delivering. (This was particularly true for AVIPAS PTZ cameras)
- When you drag a shot onto another shot, now a warning message will appear giving you the option to 'cancel' or 'create' a playlist
- Now, when you add media, you will be shown the location of your last imported media file
- Wirecast no longer crashes when opening text files encoded with specific formats
- Fixed a crash that could occur after deleting an output destination
- Fixed an issue where a Rendezvous session webpage would not display all the guests depending on browsers
- added more information that could be helpful to us and the user, in the case of a websocket error when using Rendezvou
- Fixed a crash when opening certain MPEG-4 Version 3 files
- Improved ability to capture video from Sony Imaging Edge Webcam software
- We reimplemented the ability to stream to Facebook using the Device Pairing workflow (which lets you stream to Facebook using a one-time stream key, rather than having to sign into a Facebook account)
- Updated the Quicksync SDK to fix an issue where the Quicksync encoder was not working with new drivers
- We now let you save your document when you have so many unused sources that need to be deleted, it takes up all the available window real estate
- When switching back and forth to a playlist tab all your layers will retain their sizes
- Fixed an issue where Virtual Mic output on Windows would not include sources that were removed from the Monitor’s mix
- Preferences for Camera no longer reset after rebooting computer
- Fixed an issue in Rendezvous where if browser didn't send any video, we would not send audio
- Now you can happily mute Replay Template shots
- We now do a better job of collecting crash dump files on Windows