Slack for Windows 歷史舊版本 Page7

更新時間：2019-10-02
更新細節：

What's new in this version:

- You can now email screenshots! Make sure to configure your application.xml file

更新時間：2019-10-01
更新細節：

更新時間：2019-09-29
更新細節：

What's new in this version:

Introducing the Auto Screen Capture Configuration File:
- The new "autoscreen.conf" file can be used to customize the configuration set utilized by Auto Screen Capture. So you can now store the application's settings in an entirely different location from the user's personal settings or simply create a centralized configuration area by using the new "-config" command line argument to specify which configuration file each autoscreen.exe binary should load at startup - great for networked server environments

A configuration file that can be used by Auto Screen Capture should, at a minimum, contain the following 10 lines representing key-value pairs that will be parsed by the application upon execution:
- ScreenshotsFolder=screenshots
- DebugFolder=!autoscreendebug
- LogsFolder=!autoscreendebuglogs
- ApplicationSettingsFile=application.xml
- UserSettingsFile=user.xml
- EditorsFile=!autoscreeneditors.xml
- RegionsFile=!autoscreenregions.xml
- ScreensFile=!autoscreenscreens.xml
- TriggersFile=!autoscreentriggers.xml
- ScreenshotsFile=!autoscreenscreenshots.xml
- As you can see, each line specifies either the name of a folder or a file. If only the folder name is given (such as "screenshots") then Auto Screen Capture will parse it as the "screenshots" folder in the same folder where the executed autoscreen.exe binary is found. You can also specify a folder name with a trailing backslash but this isn't necessary. If a file extension is found then Auto Screen Capture will parse the filename as an XML file. You can tell Auto Screen Capture where to find each XML file by specifying absolute or relative (sub)folder paths

更新時間：2019-09-27
更新細節：

What's new in this version:

vMix 22.0.0.69
- Change log not available for this version


vMix 22.0.0.68
- Fixed issue with TCP API where vMix may slow down after a few hours of constant API use
- This should resolve the performance issue seen when using apps like Scoreboard OCR
- Fixed issue where StreamDeck may not reconnect to shortcuts after restarting vMix


vMix 22.0.0.67
- Fixed issue with MP4 Fault Tolerant recordings when Audio Bitrate was higher than 192 Kbps
- Fixed issue with MultiCorder when a source is offline
- Added support for latest Bluefish Nitro capture drivers


vMix 22.0.0.66
- Added ability to select the Input Number when adding the input
- Added option to right click input "cog" menu to move an input to a numbered position instead of dragging
- Added ability to hide an individual input's audio mixer if it is not needed
- Added shortcut/activator templates for X-Keys XKE-124 Video Switcher Kit and upcoming XKE-64 Replay Kit
- Added scrolling support to Data Sources source toolbar
- Added Fault Tolerant option to MP4 recording. Requires using vMix Video Tools to index before use in some video editors
- Added "Increase Buffer Size" option when adding an NDI input. This is useful for smoothing jittery video of NDI-HX sources on some networks at the expense of latency
- Added "High Output Performance Mode" in Settings -> Performance. Improves render time when outputting 4K60 video when used with high end graphics cards (GeForce 1080+)
- Reduced GPU Mem usage of Web Browser input by over 50%
- Various fixes and improvements to vMix AV
- Fixed upside down video in MultiCorder with some types of sources
- Fixed MP3 playback issues with some files
- Fixed issue where a broken Stream Deck profile could crash vMix
- Fixed issue where some GT title elements would load up hidden from a preset if they were previously hidden by a transition
- Fixed Triggers list showing incorrect input numbers
- Fixed Triggers not activating on use of T-Bar
- Fixed issue where some spreadsheets may have millions of blank rows that were being imported causing high memory usage in vMix
- Limited Excel source to importing only first 20,000 rows to prevent this. If more than 20,000 rows are needed please contact us
- Fixed MultiView layout setting not saving correctly in Preset
- Small performance improvements across the board


vMix 22.0.0.60
- New QR Code support in GT Designer
- Creates a QR code image that can be dynamically updated from the vMix Title Editor, Data Sources and Shortcuts
- New "Show Visible Toggle" option in GT Designer
- When enabled allows turning on or off selected images and text fields in the vMix Title Editor and Shortcuts
- New High DPI support in vMix User Interface for high resolution displays
- Updated Restream API integration
- Fixed audio corruption issue with some AJA capture devices
- Substantially improved performance of Image Sequence, especially in 4K and 60p workflows
- Fixed rare with countdown timer after closing a title input


vMix 22.0.0.57
- MarkIn/MarkOut values added to XML API
- Fixed issue when updating a GT title from multiple sources at the same time.
- Fixed VST3 issue with Nectar 3 plugin


vMix 22.0.0.56
- Added "preview" overlay flag to vMix XML API to identify the difference between an overlay displayed on the output vs preview
- Fixed WAV file recording not working when using new vMix AVI format
- Fixed large preview window showing up as blank when resetting camera input
- Fixed error when using Replay on inputs that disconnect/reconnect often
- Fixed Adobe Premiere import issue with vMix AVI when recording cameras without audio


vMix 22.0.0.54
- GT: Added Blink Continuous transition
- GT: Added Square/Rounded option for rectangle Stroke borders
- GT: Fixed issue where custom image in a preset did not always override the template image
- Added support for plug and play MIDI and X-Keys devices while vMix is still running. (Important note: this will not resolve issues where devices are disconnecting on their own, in these cases, this indicates a system fault that is outside of our control)
- Added additional caching in vMix Social to help with long photo download times on Facebook servers
- Updated Twitch streaming quality presets based on recommendations from Twitch team
- Added "Auto" thread setting in streaming quality, which will select the optimal number of threads to use on high-core machines. Not applicable to hardware encoding


vMix 22.0.0.52
- Fixed issue with Restart not working correctly with GT Tickers
- Fixed issue where some YouTube accounts reports duplicate Stream Now streams, causing an error in vMix


vMix 22.0.0.51
- Fix when starting overlay of GT templates that have had all animations removed
- GT animations will now only automatically trigger if autoplay/autopause are enabled
- Renamed Flash / RTMP input to Flash, as it is recommended to use Stream VLC input instead for RTMP
- Fixed stutter in VLC RTMP playback if frame rate is misreported by server
- Fixed Mark Out for some video formats occurring too early on some video formats
- Updated The Extreme scoreboard to work correctly when using countdown in clock fields


vMix 22.0.0.50
- VMix Social updated Facebook source to now show a dropdown box of all pages an account has access to. Previously a box was provided to type in a page name which may have caused confusion due to Facebook security policies of only allowing admin access to pages
- X-keys XKE-40 support added
- Fixed Live Pause not working on Desktop Capture input on some systems
- Fixed padding issue with VLC input when bringing in RTMP 1080p sources
- List input now provides better performance when using images
- Display -> Outputs dropdowns support up to 300 inputs
- Fixed issue with MultiCorder activator
- Fixed issue where Vimeo streaming destination did not show any streams when over 200 videos were in an account


vMix 22.0.0.49
- Virtual PTZ behaviour is now more consistent with a physical PTZ including edges of the frame being cropped out when used with MultiView and Overlays
- Added checkbox in PTZ settings to have PTZ thumbnails always displayed on input previews even while moving
- Fixed Audio Settings button displaying error if already open
- Fixed some Facebook pages/groups not showing up if user has a very large number on their account (> ~30)
- Facebook destination will now stop the stream on Facebook just prior to stopping in vMix, previously vMix would be stopped first which
depending on the processing time on Facebook may lead to a "stream has been interrupted" message on Facebook instead of an ended notice
- Fixed scrolling issue in input and mixer sections on some systems
- Improved sync on MP4 video playback
- Fixed Web Browser input audio not working on some systems
- Fixed typo in Scoreboard 3- Lineup 11 template leading to inconsistent data source auto assignment


vMix 22.0.0.48
GT - Easy to use, high-performance, animated graphics:
- Over 100+ animated title, scoreboard, ticker and social templates to choose from in HD and 4K
- Four way ticker support: create custom tickers with top, bottom, left or right scroll directions
- GT Designer Standard allows creating custom static titles and animated tickers in all vMix edition
- GT Designer Advanced allows creating custom animated titles along with the ability to import from Adobe Photoshop PSD files
- Spell check support added to built in vMix Title Editor
- New Clock dropdown box in Title Editor provides built in presets to add common clock formats to a title

MultiCorder (4K and Pro editions):
- Added support for recording Video Call sources in addition to Output1-4
- Individual MultiCorder settings can be saved in each preset

VMix Video Codec:
- High quality, fault tolerant, low CPU codec suitable for post production editing on Windows
- ProRes-like codec with support for Adobe Premiere, Magix Vegas Pro and most other Windows video editing programs
- Supported in both the Recorder and MultiCorder

Virtual PTZ (4K and Pro editions):
- Turns any input into a Virtual PZ camera with high quality, customisable digital zoom

Live Pause:
- Live Pause (Freeze Frame) Camera, NDI and Desktop Capture inputs by clicking the pause icon under the input

Outputs:
- New MultiView Output layout options
- Set the title bar either above or below the MultiView Output video previews
- Customise Preview/Output headings between fixed text and input names

NDI:
- Updated NDI support to latest 3.8 SDK
- Included vMix NDI Config tool allows toggling between UDP and TCP transmission to allow optimising performance based on network requirements

Shortcuts:
- SnapshotInput
- SetTickerSpeed
- TitleBeginAnimation
- LivePlayPause

Controllers:
- Stream Deck and Stream Deck mini support. Add the vMix plugin from the Stream Deck App store. Set buttons to live thumbnail previews via shortcuts, or colours via activators
- Joystick Z axis support
- Joystick pressure sensitive support. Allows variable speed pan/title/zoom on supports PTZ cameras including the new Virtual PTZ
- X-Keys HD15 GPIO support added

Devices:
- Support for AJA Kona 5

Other:
- New GPU memory % indicator in status bar. This refers to special memory shared between the CPU and GPU and can be used to identify potential performance problems when using a large number of inputs
- Vimeo streaming provider now supports selecting a previous setup event to stream to
- SlideShow Properties window (for Photos and PowerPoint inputs) can now be resized. Rearranged image orders is now saved in the vMix preset
- New Copy From button in Input Settings can be used to copy Triggers, MultiView and Colour Correction between inputs
- New cog buttons on Preview and Output to open up associated Input Settings
- Added ability to solo Bus A or Bus B through Headphones output. Click the [S] button in the Bus mixer to toggle on/off
- Added support for resizable VST3 plugins


vMix 22.0.0.47

GT - Easy to use, high-performance, animated graphics:
- Over 100+ animated title, scoreboard, ticker and social templates to choose from in HD and 4K
- Four way ticker support: create custom tickers with top, bottom, left or right scroll directions
- GT Designer Standard allows creating custom static titles and animated tickers in all vMix edition
- GT Designer Advanced allows creating custom animated titles along with the ability to import from Adobe Photoshop PSD files
- Spell check support added to built in vMix Title Editor
- New Clock dropdown box in Title Editor provides built in presets to add common clock formats to a title

MultiCorder (4K and Pro editions):
- Added support for recording Video Call sources in addition to Output1-4
- Individual MultiCorder settings can be saved in each preset

vMix Video Codec:
High quality, fault tolerant, low CPU codec suitable for post production editing on Windows.:
- ProRes-like codec with support for Adobe Premiere, Magix Vegas Pro and most other Windows video editing programs
- Supported in both the Recorder and MultiCorder
- Virtual PTZ (4K and Pro editions)
- Turns any input into a Virtual PZ camera with high quality, customisable digital zoom

Live Pause:
- Live Pause (Freeze Frame) Camera, NDI and Desktop Capture inputs by clicking the pause icon under the input

Outputs:
- New MultiView Output layout options
- Set the title bar either above or below the MultiView Output video previews
- Customise Preview/Output headings between fixed text and input names

NDI:
- Updated NDI support to latest 3.8 SDK
- Included vMix NDI Config tool allows toggling between UDP and TCP transmission to allow optimising performance based on network requirements.
- Shortcuts
- SnapshotInput
- SetTickerSpeed
- TitleBeginAnimation
- LivePlayPause
- Controllers
- Stream Deck and Stream Deck mini support. Add the vMix plugin from the Stream Deck App store. Set buttons to live thumbnail previews via shortcuts, or colours via activators.
- Joystick Z axis support
- Joystick pressure sensitive support. Allows variable speed pan/title/zoom on supports PTZ cameras including the new Virtual PTZ.
- X-Keys HD15 GPIO support added

Devices:
- Support for AJA Kona 5

Other:
- New GPU memory % indicator in status bar. This refers to special memory shared between the CPU and GPU and can be used to identify potential performance problems when using a large number of inputs
- Vimeo streaming provider now supports selecting a previous setup event to stream to
- SlideShow Properties window (for Photos and PowerPoint inputs) can now be resized. Rearranged image orders is now saved in the vMix preset
- New Copy From button in Input Settings can be used to copy Triggers, MultiView and Colour Correction between inputs
- New cog buttons on Preview and Output to open up associated Input Settings
- Added ability to solo Bus A or Bus B through Headphones output. Click the [S] button in the Bus mixer to toggle on/off
- Added support for resizable VST3 plugins

更新時間：2019-09-26
更新細節：

What's new in this version:

crypto:
- Add oaepLabel option

deps:
- Update V8 to 7.7.299.11 #28918
- More efficient memory handling
- Stack trace serialization got faster
- The Intl.NumberFormat API gained new functionality
- For more information: https://v8.dev/blog/v8-release-77

events:
- Add support for EventTarget in once

fs:
- Expose memory file mapping flag UV_FS_O_FILEMAP

inspector:
- New API - Session.connectToMainThread

process:
- Initial SourceMap support via env.NODE_V8_COVERAGE

stream:
- Make _write() optional when _writev() is implemented

tls:
- Add option to override signature algorithms

util:
- Add encodeInto to TextEncoder

worker:
- The worker_thread module is now stable

Commits:
- benchmark: improve process.env benchmarks (Anna Henningsen)
- bootstrap: add exception handling for profiler bootstrap (Shobhit Chittora)
- bootstrap: provide usable error on missing internal module (Jeremiah Senkpiel)
- build: do not indent assignments in Makefile (Joyee Cheung)
- build: allow clang 10+ in configure.py (Kamil Rytarowski)
- build: re-run configure on node_version.h change (Anna Henningsen)
- build: improve make coverage (Anna Henningsen)
- build: add comment to .travis.yml on how to test Py3 (cclauss)
- build: update minimum AIX OS level (Michael Dawson)
- build: remove experimental Python 3 tests (Christian Clauss)
- (SEMVER-MINOR) build: reset embedder string to "-node.0" (Michaël Zasso)
- build,win: fix Python detection on localized OS (João Reis)
- console: skip/strip %c formatting (Gus Caplan)
- console,util: fix missing recursion end while inspecting prototypes (Ruben Bridgewater)
- crypto: use BoringSSL-compatible flag getter (Shelley Vohr)
- (SEMVER-MINOR) crypto: fix OpenSSL return code handling (Tobias Nießen)
- (SEMVER-MINOR) crypto: add oaepLabel option (Tobias Nießen)
- deps: patch V8 to 7.7.299.11 (Michaël Zasso)
- deps: V8: cherry-pick deac757 (Benjamin Coe)
- deps: patch V8 to 7.7.299.10 (Thomas)
- deps: V8: cherry-pick 35c6d4d (Sam Roberts)
- deps: update npm to 6.11.3 (claudiahdz)
- deps: upgrade to libuv 1.32.0 (cjihrig)
- deps: patch V8 to 7.7.299.8 (Michaël Zasso)
- (SEMVER-MINOR) deps: patch V8 to be API/ABI compatible with 7.4 (from 7.7) (Michaël Zasso)
- deps: patch V8 to be API/ABI compatible with 7.4 (from 7.6) (Michaël Zasso)
- (SEMVER-MINOR) deps: patch V8 to be API/ABI compatible with 7.4 (from 7.5) (Michaël Zasso)
- deps: V8: cherry-pick e3d7f8a (cclauss)
- (SEMVER-MINOR) deps: V8: fix linking issue for MSVS (Refael Ackermann)
- (SEMVER-MINOR) deps: V8: fix BUILDING_V8_SHARED issues (Refael Ackermann)
- (SEMVER-MINOR) deps: V8: add workaround for MSVC optimizer bug (Refael Ackermann)
- (SEMVER-MINOR) deps: V8: use ATOMIC_VAR_INIT instead of std::atomic_init (Refael Ackermann)
- (SEMVER-MINOR) deps: V8: forward declaration of Rtl*FunctionTable (Refael Ackermann)
- (SEMVER-MINOR) deps: V8: patch register-arm64.h (Refael Ackermann)
- (SEMVER-MINOR) deps: V8: update postmortem metadata generation script (cjihrig)
- (SEMVER-MINOR) deps: V8: silence irrelevant warning (Michaël Zasso)
- (SEMVER-MINOR) deps: V8: un-cherry-pick bd019bd (Refael Ackermann)
- (SEMVER-MINOR) deps: V8: fix filename manipulation for Windows (Refael Ackermann)
- (SEMVER-MINOR) deps: update V8 to 7.7.299.4 (Michaël Zasso)
- doc: update N-API version matrix (Gabriel Schulhof)
- doc: add code example to process.throwDeprecation property (Juan José Arboleda)
- doc: fix some signatures of .end() methods (Vse Mozhet Byt)
- doc: remove the suffix number of the anchor link (Maledong)
- doc: explain stream.finished cleanup (Robert Nagy)
- doc: fix require call for spawn() in code example (Marian Rusnak)
- doc: make minor improvements to stream.md (Robert Nagy)
- doc: fix nits in net.md (Vse Mozhet Byt)
- doc: correct trivial misspelling in AUTHORS (gcr)
- doc: update list style in misc README docs (Rich Trott)
- doc: add missing complete property to http2 docs (Javier Ledezma)
- doc: add leap second behavior notes for napi methods (Levhita)
- doc: explain esm options for package authors (Geoffrey Booth)
- doc: update experimental loader hooks example code (Denis Zavershinskiy)
- doc: use consistent unordered list style (Nick Schonning)
- doc: add Bethany to TSC (Michael Dawson)
- doc: add Tobias to the TSC (Michael Dawson)
- doc: mention unit for process.hrtime.bigint() (Anna Henningsen)
- doc: add documentation for stream readableFlowing (Chetan Karande)
- doc: indent child list items for remark-lint (Nick Schonning)
- doc: space around lists (Nick Schonning)
- doc: exitedAfterDisconnect value can be false (Nimit Aggarwal)
- doc: remove wrong escapes (XhmikosR)
- doc: prepare markdown files for more stringent blank-line linting (Rich Trott)
- doc: simplify wording in n-api doc (Michael Dawson)
- doc: update release guide with notes for major releases (James M Snell)
- doc: indent ordered list child content (Nick Schonning)
- doc: fix unsafe writable stream code example (Chetan Karande)
- doc: async_hooks.createHook promiseResolve option (Ben Noordhuis)
- doc: change urls directly from 'http' to 'https' (Maledong)
- doc: use consistent indenting for unordered list items (Nick Schonning)
- doc: start unorded lists at start of line (Nick Schonning)
- doc: change the 'txt' to 'console' for a command (Maledong)
- esm: make dynamic import work in the REPL (Bradley Farias)
- events: improve performance of EventEmitter.emit (Matteo Collina)
- (SEMVER-MINOR) events: add support for EventTarget in once (Jenia)
- fs: remove unnecessary argument check (Robert Nagy)
- gyp: make StringIO work in ninja.py (Christian Clauss)
- http: refactor responseKeepAlive() (Robert Nagy)
- http2: do not crash on stream listener removal w/ destroyed session (Anna Henningsen)
- http2: send out pending data earlier (Anna Henningsen)
- http2: do not start reading after write if new write is on wire (Anna Henningsen)
- (SEMVER-MINOR) inspector: new API - Session.connectToMainThread (Eugene Ostroukhov)
- lib: remove the use of util.isFunction (himself65)
- (SEMVER-MINOR) lib,test: fix error message check after V8 update (Michaël Zasso)
- module: error for CJS .js load within type: module (Guy Bedford)
- module: reintroduce package exports dot main (Guy Bedford)
- n-api: delete callback bundle via reference (Gabriel Schulhof)
- n-api: mark version 5 N-APIs as stable (Gabriel Schulhof)
- perf_hooks: remove non-existent entries from inspect (Kirill Fomichev)
- perf_hooks: ignore duplicated entries in observer (Kirill Fomichev)
- perf_hooks: remove GC callbacks on zero observers count (Kirill Fomichev)
- perf_hooks: import http2 only once (Kirill Fomichev)
- policy: minor perf opts and cleanup (Bradley Farias)
- (SEMVER-MINOR) process: initial SourceMap support via NODE_V8_COVERAGE (Benjamin Coe)
- process: use public readableFlowing property (Chetan Karande)
- repl: convert var to let and const (Lucas Holmquist)
- repl: fix bug in fs module autocompletion (zhangyongsheng)
- repl: add autocomplete support for fs.promises (antsmartian)
- repl: add missing variable declaration (Lucas Holmquist)
- src: perform check before running in runMicrotasks() (Jeremy Apthorp)
- src: discard remaining foreground tasks on platform shutdown (Anna Henningsen)
- src: fix closing weak HandleWraps on GC (Anna Henningsen)
- src: use libuv to get env vars (Anna Henningsen)
- src: re-delete Atomics.wake (Gus Caplan)
- src: print exceptions from PromiseRejectCallback (Anna Henningsen)
- src: modified RealEnvStore methods to use libuv functions (Devendra Satram)
- src: make ELDHistogram a HandleWrap (Anna Henningsen)
- src: check microtasks before running them (Shelley Vohr)
- src: fix ValidateDSAParameters when fips is enabled (Daniel Bevenius)
- (SEMVER-MINOR) src: update v8abbr.h for V8 7.7 (cjihrig)
- (SEMVER-MINOR) src,lib: expose memory file mapping flag (João Reis)
- stream: add test for multiple .push(null) (Chetan Karande)
- stream: cleanup use of internal ended state (Chetan Karande)
- (SEMVER-MINOR) stream: make _write() optional when _writev() is implemented (Robert Nagy)
- stream: apply special logic in removeListener for readable.off() (Robert Nagy)
- stream: do not call _read() after destroy() (Robert Nagy)
- stream: optimize creation (Robert Nagy)
- stream: simplify isUint8Array helper (Anna Henningsen)
- test: fix race condition in test-worker-process-cwd.js (Ruben Bridgewater)
- test: fix flaky test-inspector-connect-main-thread (Anna Henningsen)
- test: unmark test-worker-prof as flaky (Anna Henningsen)
- test: improve test-worker-message-port-message-before-close (Anna Henningsen)
- test: disable core dumps before running crash test (Ben Noordhuis)
- test: permit test-signalwrap to work without test runner (Rich Trott)
- test: remove flaky status for test-statwatcher (Rich Trott)
- (SEMVER-MINOR) test: update postmortem metadata test for V8 7.7 (cjihrig)
- timers: set _destroyed even if there are no destroy-hooks (Jeremiah Senkpiel)
- (SEMVER-MINOR) tls: add option to override signature algorithms (Anton Gerasimov)
- tools: cleanup getnodeversion.py for readability (Christian Clauss)
- tools: update ESLint to 6.4.0 (zhangyongsheng)
- tools: fix iculslocs to support ICU 65.1 (Steven R. Loomis)
- tools: python3 compat for inspector code generator (Ben Noordhuis)
- tools: delete v8_external_snapshot.gypi (Ujjwal Sharma)
- tools: fix GYP ninja generator for Python 3 (Michaël Zasso)
- (SEMVER-MINOR) tools: sync gypfiles with V8 7.7 (Michaël Zasso)
- tty: add color support for mosh (Aditya)
- util: include reference anchor for circular structures (Ruben Bridgewater)
- (SEMVER-MINOR) util: add encodeInto to TextEncoder (Anna Henningsen)
- (SEMVER-MINOR) worker: mark as stable (Anna Henningsen)
- worker: make terminate() resolve for unref’ed Workers (Anna Henningsen)
- worker: prevent event loop starvation through MessagePorts (Anna Henningsen)
- worker: make transfer list behave like web MessagePort (Anna Henningsen)

更新時間：2019-09-23
更新細節：

What's new in this version:

- Fixed scheduled start time when running from command line

更新時間：2019-09-23
更新細節：

What's new in this version:

- A new Configure menu has been added to each Screen and Region. This should make the application easier and more accessible for new users

更新時間：2019-09-12
更新細節：

更新時間：2019-09-12
更新細節：

What's new in this version:

- This release has a minor fix for the tab pages on the left side of the interface (just underneath the calendar) so that, if you have way too many screens and/or regions listed (for example), you'll now be able to see a vertical scrollbar so you can scroll up and down the list. In other words, you'll be fine with staying on 2.2.0.19 unless you really need this version.

更新時間：2019-09-05
更新細節：