Hard Disk Sentinel 歷史舊版本 Page3

更新時間：2016-01-28
更新細節：

What's new in this version:

Improvements and new features:
- double click on the Health bar to configure custom health threshold for any hard disk / SSD (registered version only)
- File menu -> Drive connection/Removal event log displays drive connection / removal events (registered version only)
- detailed text description upon different problems (for example communication errors) and links to further details
- determine file stored in any sector of the hard disk drive / SSD: to get information about possible damaged files on unreadable sectors. (works on NTFS/FAT32/FAT16/FAT12 volumes, hard disks, SSDs, removable drives, pendrives, memory cards)
- Disk menu -> Surface test -> View -> Click on a sector to view the sector contents and then on the bottom click on "Detect file information for sector"
- new option: automatically detect and report all possible damaged files at the end of the complete surface scan.
- To enable, select Disk menu -> Surface test and in the new window, select Configuration tab, then on the bottom enable "Detect file information for sectors with errors"
- double click on the "power on time" label or value to show in years / days / hours format (when the device is older than 1 year)
- automatically re-adjust hard disk features (Advanced Power Management, Acoustic Management, Free Fall Sensor sensitivity) after hot-plug of the drive, without re-start (if the option enabled)
- detection of compatibility problems causing possible data corruption / data loss: Hard disk case: Capacity is not correct
- added option to save the contents of the Log page of each hard disks to reports (enable at Configuration -> Message settings -> Detailed report components)
- added option to detect and report System Management BIOS information to reports (enable at Configuration -> Message settings -> Detailed report components)
- improved "low disk space" alerts
- display of Seagate external USB hard disk enclosure model and serial number for warranty purposes

Improved hardware support:
- added support of Samsung 950, 951 NVMe SSDs: detection of complete status including power on time, temperature, read/write statistics, wearout, etc.
- Requires installation of Samsung NVMe driver from Driver Zone page.
- added support of Samsung 950 NVMe Pro M.2 SSD: detection of complete status including power on time, temperature, read/write statistics, wearout, etc.
- Detection with both standard NVMe driver and Samsung NVMe driver from Driver Zone page.
- added support of Intel NVMe SSDs, Intel 750 SSD, INTEL SSDPEDMW400G4, INTEL SSDPEDMW012T4: detecting temperature, health, features, complete self-monitoring S.M.A.R.T. data
- Requires installation of Intel NVMe driver from Driver Zone page.
- added support of Dawicontrol RAID controllers: detect and display complete disk status information about hard disks / SSDs managed by Dawicontrol RAID controllers when the drives used in RAID configuration or standalone mode. Supported controllers: Dawicontrol DC133, DC150, DC154, DC300e/310e, DC324e, DC3410, DC4300/4320, DC600e/610e, DC622e, DC624e.
- Requires installation of latest Dawicontrol driver from Driver Zone page.
- added support of Marvell 9220/9230/9235 hardware RAID controller: detection of hard disk status when RAID/Hyperduo/standalone configuration of hard disks. Tested with Marvell 9230.
- added support of Intel RMS3CC080 SAS/SATA RAID controller: detect hard disk status when drives configured as RAID
- added support of JMicron JMS56X hardware RAID controller: detection of hard disk status when RAID/JBOD/standalone configuration of hard disks
- added support of RAIDON GR2660-B3 dual bay external RAID enclosure: detect and display both hard disks in the RAID configuration
- added support of RAIDON GR3630 2S SB2+ Raid device: detect and display both hard disks in the RAID configuration
- added support of RAIDON iH1010: detect and display both hard disks
- added support of Startech S32SAT3R Internal Drive Mounted Dual SATA RAID Adapter
- added support of Lenovo 720ix SATA/SAS RAID controllers: detection of complete hard disk / SSD information about drives configured as RAID
- added support of Lenovo MR9340-8i RAID controller (ThinkStation FLEX RAID Adapter): detection of complete hard disk / SSD information about drives configured as RAID
- added support of AMD Bolton chipset: detect and report complete status and S.M.A.R.T. information of hard disks / SSDs configured as RAID
- added support for USB 3.1 devices (controllers, enclosures, SATA->USB converters)
- important update for newer Sandisk SSD models, Kingston HyperX Predator
- improved detection and reporting of various SSDs (AData, Crucial, Micron, Kingston, OCZ, Phison, Patriot, Sandisk, Samsung)
- improved support of LSI / Avago controllers in general and when Cachecade feature used
- improves support of Intel RAID controllers, Intel C602 chipset
- improved compatibility with Toshiba external USB 3.0 hard disks
- improved USB attached SCSI (UASP) support
- improved support for SAS SSDs (lifetime and wearout statistics), SAS hard disks
- improved Adaptec RAID controller support, important update for Adaptec controllers
- improved compatibility and support of HP Smart Array SCSI RAID controllers (HP Smart Array 6i, HP Smart Array 6400)
- improved support of Seagate external SSDs
- improved reporting of Lenovo SSHD health and text description
- improved support of Promise 8760 SAS RAID controller
- improved support of Rosewill USB 3.0 RX200R-APU3-25B
- fixed: random seek test frozen on some external USB drives with 4K physical sectors
- fixed: Disk menu -> Surface test -> Disk contents inspector could not show sector contents on some external USB drives with 4K physical sectors
- fixed: real time performance monitoring may stopped after wake up
- fixed: disk surface test may not work on HP tablet PCs to diagnose eMMC card

Bug fixes, further modifications:
- added Korean language support, thanks to pCsOrI for the translation
- improved multi-language support, fixes for Czech and Japanese languages
- fixed surface test window display when German, Dansk, Dutch languages selected
- user interface fixes, corrections
- improved system disk drive icon handling, real-time performance monitoring
- improved power on time calculation
- improved menu display and readability on dark Windows themes
- improved sending network message with NET SEND, longer message with detailed information (on newer Windows OSes, WinSent tool can be used to receive messages/alerts)
- fixed text/HTML/XML report: system memory size may be incorrect on systems with 8 GB or more physical memory
- fixed text/HTML/XML report: last system startup time was incorrect
- fixed problem when exporting S.M.A.R.T. attributes
- minor changes/modifications in e-mail and report generation

更新時間：2015-01-13
更新細節：

What's new in this version:

Improvements and new features:
- showing current driver version and date on Information page for the current hard disk controller / motherboard chipset
- showing Disk Controller and controller capability for USB drives on Information page
- automatically install HDSentinel.ini (pre-configured configuration file) if available in the folder of the installer
- advanced hard disk surface test error detection / reporting method
- improved hard disk error logs
- improved real-time performance monitoring
- improved capacity-check: reporting if drives over 2 TB can't be properly utilised due to OS / controller restrictions

Improved hardware support:
- added support for HP Smart Array RAID controllers: detecting and reporting error counters, temperature and health status, possible changes/degradations, SSD wearout provided by the RAID controller for SATA / SAS hard disks, SSDs.
- Tested with HP Smart Array E200, P400, P410, P420 and embedded B120i controllers.
- added support for Accusys hardware RAID enclosures: detection of hard disk status of Accusys 76510, 75170, etc.
- added support for RaidON MR2020-2S-S2R hardware RAID enclosure: detection of hard disk status configured in RAID 0 / RAID 1
- added support for CineRAID CR-H212 RAID enclosure and RAID enclosures with Prolific USB RAID chipset: showing complete hard disk status of both hard disks in all (standalone, BIG / JBOD, RAID0, RAID1) modes
- added support of Intel RMS25CB080 RAID controller (complete hard disk status detection of drives configured in RAID mode)
- added support of WD Black 2 hybrid drives
- improved compatibility with ASMedia SATA controllers (integrated and add-on cards) with newer drivers
- improved support for LSI MegaRAID 9361 SAS controller, Dell PERC H710P RAID controller
- improved reporting of TRIM function on different motherboard chipsets, disk controllers
- improved SAS expander / enclosure temperature detection
- improved support of Adaptec, Avago, Intel, Promise, LSI SAS RAID controllers
- improved support of various Samsung hard disks
- improved support and status reporting of hard disks with Lenovo-specific firmware
- improved support of AData, Corsair, Crucial, Intel, Kingmax, Kingfast, Kingston, LiteOn, OCZ, Plextor, PNY, Samsung, Sandisk, Smartbuy, Toshiba, Transcend SSDs
- improved support of SanDisk Extreme pendrives
- improved compatibility with Intel RST driver 12.9 and newer
- improved compatibility with Toshiba SAS hard disks
- improved compatibility with USB 3.0 IDE/SATA "combo" adapters
- improved support of Silicon Image RAID controllers with mutliple array / standalone disk configuration
- improved compatibility with external RAID enclosures with JMicron chipsets, do not display hard disks twice when they hard disks are in standalone (non-RAID, port multiplier) mode
- improved support of 2 TB 2.5" notebook hard disks
- improved compatibility with Seagate Freeagent Dekstop drives, external USB 3.0 hard disks / enclosures / docking stations
- improved reporting of CF Card status (with CF->IDE or CF->SATA adapters)
- improved S.M.A.R.T. reporting for SCSI / SAS hard disks: showing accumulated power condition transitions, load/unload cycles (if supported by HDD)

Bug fixes, further modifications:
- fixed slow write test performance with LSI / Avago / Dell PERC / IBM / Intel SAS RAID controllers
- fixed online warranty check link for Seagate, Hitachi drives
- database updates, modifications
- improved multi-language support

更新時間：2014-01-30
更新細節：

What's new in this version:

Improvements and new features:
- Disk -> Short self test, Extended self test options available for SCSI and SAS hard disks
- option to disable "Always-on-top" behaviour of Status Windows (Configuration -> Status Window)
- double click on the installation date on Preferences page to configure installation date for the correspind hard disk / SSD and display daily average writes/reads based on that installation date
- improved and faster startup of disk surface tests on drives with lower health
- improved text description and improved report for hard disks / SSDs
- improved backup projects and file handling
- advanced health detection and reporting on various hard disk models (Samsung, Seagate, Hitachi, Toshiba, Western Digital)
- added Japanese language support (thanks Kyo for the translation)

Improved hardware support:
- added support for Promise 4650, 8650, 16650 SATA/SAS controllers: detection of complete hard disk status when SATA or SAS hard disks configured as standalone or as RAID arrays.
- added support for LSI SAS3 (SAS 12G) 3008 Fury Series SATA/SAS RAID controllers: detection of complete hard disk status when SATA or SAS hard disks configured as standalone or as RAID arrays.
- added support for IBM M5115 SATA/SAS RAID controllers: detection of complete hard disk status when SATA or SAS hard disks configured as standalone or as RAID arrays.
- added support for BroadCom / Ciprico RAIDCore SATA controllers: detection of complete hard disk status when SATA hard disks configured as standalone or as RAID arrays.
- detection of all hard disks from RAID arrays configured by AMD integrated RAID controller. Report generic status (Good or failure predicted) for second and further drives and displaying complete information for the first hard disk. Works with driver 3.2.1540.92 ONLY (newer drives do not work) available from the Driver Zone. See Updating driver for AMD AHCI Compatible RAID Controller page for details.
- detection of Adaptec RAID controller temperature and SES2 enclosure information
- detection of possible S.M.A.R.T. information and reporting health for pendrives if supported, for example Sandisk Cruzer Extreme series
- improved support for NVidia chipsets, Intel RAID arrays and newer Intel RST drivers
- improved detection and compatibility with LSI controllers, Intel RES2SV240 SAS expander
- improved support for Corsair, Crucial, Kingston, Samsung, Sandisk SSDs in general
- improved compatibility and features of JMicron internal and external RAID arrays, showing hot-spare drive status as well
- improved compatibility with APPLE SSDs
- improved compatibility with various memory card readers, pendrives

Bug fixes, further modifications:
- fixed "connection timeout" errors displayed when e-mail sending configured by @gmail account
- fixed temperature display after swapping hard disks
- fixed sidebar gadget temperature image when service mode used
- fixed reload of previously saved configuration
- fixed display of multiple errors detected in the hard disk log
- user interface modifications, generic adjustments for multi-monitor systems and larger resolutions
- Hard Disk Sentinel icon displayed in the list of Add/Remove programs

更新時間：2013-07-11
更新細節：

What's new in this version:

Improvements and new features:
- displaying health (actual and original) during Disk -> Surface test functions
- improved display of S.M.A.R.T. attribute changes: automatically showing more dates based on screen resolution
- double click on S.M.A.R.T. attribute graphs to toggle showing all measured values
- right click on S.M.A.R.T. attribute graph to export all displayed values
- improved hardware self tests (Short self test, Extended self test) on various internal and external drives (previously reported "Interrupted with hardware/software reset" caused by special power management implementations)
- improved report of hard disk status and attributes for SCSI / SAS hard disks
- improved re-adjust Automatic Acoustic Management / Advanced Power Management levels on startup when required
- improved "sending files in e-mail" project
- log data communication errors
- added Slovak language support (thanks to Lukas Surin for translation)

Improved hardware support:
- added support of Seagate External hard disks, newer Seagate USB hard disks, FreeCom external hard disks
- added support of Adaptec 7xxx series RAID controllers in RAID mode: detection of complete hard disk status when SATA or SAS hard disks configured as RAID arrays.
- added support of Adaptec 2200S, 2120S, 2130S, 2230S SCSI controllers in RAID mode: detection of complete hard disk status when SCSI hard disks configured as RAID arrays.
- added support of PROMISE SuperTrak RAID controllers in RAID mode: detection of complete hard disk status when SATA hard disks configured as RAID arrays.
- added support of PROMISE FastTrak RAID controllers in RAID mode: detection of hard disks in the arrays and their general S.M.A.R.T. status
- added support of PROMISE enclosure information: displaying fan speed, temperature and voltage provided by the Promise enclosure
- added support of IBM M1115, SuperMicro SMC2108 RAID controller: detection of complete hard disk status when SATA hard disks configured as RAID arrays.
- added support of HighPoint RS5122B USB docking station
- added support of HighPoint Datacenter DC7280 controller
- general improvements for external USB 3.0 multi-drive enclosures
- improved support for Win XP 64 bit & different RAID controllers (Gigabyte, VIA, JMicron, etc.)
- improved support of JMicron USB 3.0 / eSATA RAID enclosures
- improved support of LSI, Intel SAS/SATA RAID controllers, displaying hot spare and unconfigured drive(s)
- improved support of HighPoint, Areca, LSI RAID controllers
- improved support of various hard disks (high capacity, 2-3-4 TB models) and newer SSD models (ADATA, OCZ, Samsung, Plextor, etc)
- improved compatibility for various card readers, pendrives
- improved detection of standalone (non-RAID) hard disks with HighPoint and Areca controllers
- improved support and compatibility for newer Intel RST drivers (12.x versions)

Bug fixes, further modifications:
- fixed: service mode startup problems on some non-English Windows systems
- fixed: previous versions may displayed error at startup if WMI libraries damaged / corrupted
- fixed: webStatus displayed partial information if Intel SSD used in the system
- fixed: disk-specific settings were not saved for some Intel SSD models
- fixed: startup may failed when Acronis software used to split 2+ TB hard disks
- fixed: Portable version startup after uninstallation of license from the actual system
- fixed: custom icon set setting may reset after standby

更新時間：2013-02-22
更新細節：

What's new in this version:

Improvements and new features, improved hardware support:
- important update for hard disks / SSDs connected to motherboards with Intel chipsets
- important update for multi-drive enclosures (port multiplier and RAID enclosures)
- important update for various SSDs (Corsair Force GT SSDs, Samsung SSDs, etc.)
- display progress (% complete) on application button during hard disk surface test
- improved support of VANTEX HX4R, Chieftec, Sans Digital external RAID enclosures
- improved support for LSI SAS/SATA RAID controllers and DELL SAS/SATA RAID controllers
- improved support and health detection for various Seagate hard disks, for example Seagate Thin hard disks and Seagate hard disks with special firmware
- improved support for Areca RAID controllers, accessing hard disks and SSDs in different connected enclosures, displaying enclosure number and slot number
- improved support of JMicron JMB36X / Gigabyte GBB36X / HighPoint / VIA RAID controllers under Windows 2003
- added support for newer WD hard disk (WD RED, WD Enterprise RE, etc.)
- support of HighPoint 4522 RAID controller: detecting and displaying connected SATA hard disks (standalone and configured as RAID)

Bug fixes, further modifications:
- fixed periodic false alarms reported by older Intel chipset drivers (providing invalid S.M.A.R.T. information)
- fixed invalid S.M.A.R.T. information reported by LSI SAS RAID controllers for standalone (non-RAID) SATA drives
- fixed display of volume labels in hard disk selector (upper left area) if one or more partitions have no assigned logical drive letter
- general improvements for Chinese language, fixed hard disk temperature symbol in Sidebar Gadget when Chinese language used
- fixed warranty check for Samsung hard disk drives
- fixed startup problem with Drobo enclosures / devices
- improved real time performance graph display
- improved and more stable dynamic DNS update function

更新時間：2013-01-18
更新細節：

What's new in this version:

Improvements and new features:
- detect and display warning if the hard disk capacity can't be fully utilised or the actual hard disk controller / driver may cause data corruption because of mis-addressing large drives
- option to save separate authentic reports for selected hard disks, saving current date and time and version to authentic reports
- option to copy log of disk surface test to clipboard
- option to select shut down / restart / standby / hibernate to be done upon hard disk problem (PRO version)
- improved "Do not allow spin down of disks" function, maintain low load/unload count
- improved multi-language support

Improved hardware support:
- improved support for Intel RAID controllers with Intel RST driver version 11.6 and newer
- improved acoustic management / advanced power management / free fall control
- improved text description and support for Kingston SSDs, OCZ SSDs
- improved health and text description for Samsung 830 and 840 SSDs
- improved detection of multi-drive enclosures with JMicron chips + special eSATA controllers
- improved detection of 3+ TB hard disks in general, Seagate external USB 3.0 hard disk drives
- improved support for LSI SAS/SATA RAID controllers, especially multiple RAID arrays/controllers, detection of hot spare drive(s)
- improved details on Information page
- improved support for hard disks with DELL / Lenovo specific firmware and their information reported
- improved performance monitoring and compatibility
- improved lifetime writes display for OCZ SSDs
- added support for Intel RS25DB080 SAS/SATA RAID controller
- added support for newer USB 3.0 hard disks, for example Seagate Expansion Desk
- added support for ASUS BOT storage driver (USB 3.0 boost mode)
- added support for new SSDs, support for OCZ Vector

Bug fixes, further modifications:
- fixed detection / startup problems with some Windows 8 systems with USB devices / special controllers
- fixed default sound alert notification file for Windows 8
- fixed default disk drive icon for A: and B: drives if they are associated with hard disk drive
- fixed invalid S.M.A.R.T. information reported for RAM disk
- service mode and tray application improvements
- improved tray icon hints, following the configured items at Configuration -> Status Window

更新時間：2012-08-06
更新細節：

What's new in this version:

Improvements and new features:
- option to show power state, hard disk serial number, hard disk comment in Status Window and sidebar gadget to identify hard disk drives easier
- show hard disk serial number, hard disk comment in hard disk selector buttons if large buttons used
- Hard Disk Sentinel Tray extension: shows hard disk status, temperature on tray and offers complete status when Hard Disk Sentinel is running in service mode under Vista/Windows 7/Windows 8/Windows 2008 (Pro version only)
- option to use custom hard disk icon sets to reflect hard disk/SSD health status and used capacity in Explorer at Configuration -> Disk control
- shows short self test / extended self test progress on hard disk selector buttons
- option to re-display short self test / extended self test progress window by clicking the flashing "hard disk test" button
- option to Update Disk Information form tray icon context menu
- added Dansk language support
- added Polish language support
- added Macedonian language support
- added Indonesian language support

Improved hardware support:
- added support for ADAPTEC SATA and SAS RAID controllers (detection of complete status of SATA / SAS hard disk drives in RAID arrays)
- added support for IBM ServeRAID M1015 RAID controllers (with LSI firmware)
- added support for NewerTech USB 3.0 adapter
- added support for Intel X79 / Intel C600 Series Chipset SATA RAID Controller (detection of complete status of SATA hard disk drives in RAID arrays)
- added support for ADDONICS external RAID enclosure, CineRAID external RAID enclosure (detection of complete status of SATA hard disk drives in RAID arrays)
- improved support of Intel ICH RAID controllers, improved compatibility with Intel RST drivers 10.8, 11.0, 11.5 ...
- improved support for LSI, 3ware and HighPoint RocketRAID 620 / 622 on Windows 2003/Windows Home Server
- improved support and attribute list for various SSDs and hard disks
- improved support for Intel, Samsung, Corsair, Mushkin SSDs
- improved detection of hard disk power state on various hard disk controllers / USB adapters
- improved AAM / APM / FreeFall management on various controllers and USB adapters
- improved compatibility with Samsung hard disk drives reporting non-standard status information
- improved support for USB / eSATA RAID enclosures with JMicron / SunPlus chips
- improved support for various Toshiba hard disk models
- fixed "power on time" for Intel 330/520 series SSDs
- fixed missing hard disk status information for COMPAQ SCSI hard disks
- fixed missing hard disk status information for standalone SAS drives on Marvell SAS controllers

Bug fixes, further modifications:
- fixed daily total read/written amount of data after sleep and wake-up cycle
- fixed daily minimum temperature slider
- fixed high CPU usage when Status Window is clicked to show partition information
- bug fixed on current temperature graph when removable hard disk disconnected and new drive connected
- bug fixed after restoring previous statistics, settings and registration information

更新時間：2012-02-03
更新細節：

What's new in this version:

Improvements and new features:
- Disk menu -> Online Warranty Check: verify drive warranty status on manufacturer website
- option to enter comment (tag) for each hard disks
- option to copy single line to clipboard from "Information" page after right-click popup menu
- hard disk surface test improvements
- option to export transfer rate values after surface test
- last detection timestamp displayed on the bottom status line
- added /TXTREPORT [filename], /HTMLREPORT [filename] command line parameters to quickly save complete report
- Reset workload counters function for Intel SSD
- displaying lifetime reads / writes for specific hard disks with support (Seagate, Hitachi, Toshiba)
- option to automatically re-adjust advanced power management / acoustic management settings on startup if required
- added Belarusian language support (translated by Yuri Petrashko)
- added digital signatures to files

Improved hardware support:
- added support for DELL RAID controllers
- added support for HP USB external drives
- added support for Marvell 63xx/64xx SAS RAID controllers (detection of SAS hard disk drives in RAID array)
- improved support and attribute list for Sandforce SSD, Samsung SSD, Intel SSD models
- improved support for Crucial SSD, Kingston SSD
- improved support for USB hard disk drives and USB adapters
- improved compatibility for Marvell SATA controllers
- improved SCSI/SAS hard disk drive support: advanced health calculation, power on time display, test log
- improved detection of hard disk power state
- improved short / extended self test starting on Windows 7
- improved advanced power management / acoustic management configuration
- improved support for RAID 10 arrays on LSI controllers
- improved RAID support under Windows 2003 x64
- improved functionality after waking up from standby with some USB hard disk drives
- detecting drives A: and B: if they are associated with hard disks / SSDs

Bug fixes, further modifications:
- using local APPDATA folder for Windows scheduler configuration files (.VBS files) under Windows Vista, 7, 2008, 8
- improved real-time performance detection
- bug fixed with tray icons under Windows 7 x64
- bug fixed with "registry-export" projects
- online attribute comparison and tray icon problems fixed with Samsung 2.5" SSDs