Blisk 歷史舊版本 Page9

更新時間：2021-01-23
更新細節：

What's new in this version:

Fixed:
- CounterDetailViewer should support setting no foreground color
- Boards with same source but different grids fail to render distinctly
- SVG with viewBox and percentage width, height renders incorrectly
- NPE in MassPieceLoader when adding Layer to piece template
- Show useful message on AWTError due to bad Java Access Bridge install

更新時間：2021-01-17
更新細節：

更新時間：2021-01-17
更新細節：

What's new in this version:

SEO SpyGlass 6.50.6
- Change log not available for this version


SEO SpyGlass 6.50.5
- Change log not available for this version


SEO SpyGlass 6.50.4
Miscellaneous:
- Fixed too small application window size because of a broken property file and other minor enhancements have been implemented in SEO SpyGlass


SEO SpyGlass 6.50.3
- Fixed too small application window size because of a broken property file and other minor enhancements have been implemented in SEO SpyGlass


SEO SpyGlass 6.50.2
- A few minor improvements have been implemented and some errors fixed in SEO SpyGlass


SEO SpyGlass 6.50.1
- A few minor improvements have been implemented and some errors fixed in SEO SpyGlass


SEO SpyGlass 6.50
- A few minor enhancements and performance improvements have been implemented in SEO SpyGlass


SEO SpyGlass 6.49.14
- A few minor enhancements have been implemented in SEO SpyGlass


SEO SpyGlass 6.49.12
- Backlink protocol validator has been updated in SEO SpyGlass


SEO SpyGlass 6.49.11
- Some performance updates have been implemented in SEO SpyGlass


SEO SpyGlass 6.49.10
- A few performance updates have been implemented in SEO SpyGlass


SEO SpyGlass 6.49.9
- A few performance updates have been implemented in SEO SpyGlass


SEO SpyGlass 6.49.8
A few performance updates have been implemented in SEO SpyGlass


SEO SpyGlass 6.49.7
- A few performance updates have been implemented in SEO SpyGlass


SEO SpyGlass 6.49.6
- Autumn sale announcement: get up to 70% off SEO PowerSuite


SEO SpyGlass 6.49.5
Miscellaneous:
- A few minor issues have been fixed in SEO SpyGlass


SEO SpyGlass 6.49.4
- A few minor issues have been fixed


SEO SpyGlass 6.49.2
- Resetting of time settings of the task scheduler and some other minor issues have been fixed


SEO SpyGlass 6.49.2
- A few minor issues have been fixed and some interface translations have been updated


SEO SpyGlass 6.49.1
- Fixed non-finishing Java processes after closing SEO SpyGlass and some other enhancements have been implemented


SEO SpyGlass 6.49
- French interface has been updated and a few other minor updates released in SEO SpyGlass


SEO SpyGlass 6.48.14
- Major Domain InLink Rank update has been released and a few other minor issues fixed in SEO SpyGlass


SEO SpyGlass 6.48.13
- Change log not available for this version


SEO SpyGlass 6.48.12
- Change log not available for this version


SEO SpyGlass 6.48.11
- Change log not available for this version


SEO SpyGlass 6.48.10
- Change log not available for this version


SEO SpyGlass 6.48.9
- Change log not available for this version


SEO SpyGlass 6.48.8
- Change log not available for this version


SEO SpyGlass 6.48.7
- Change log not available for this version


SEO SpyGlass 6.48.6
- Change log not available for this version


SEO SpyGlass 6.48.5
- A few minor updates have been implemented


SEO SpyGlass 6.48.3
- A few minor updates have been implemented


SEO SpyGlass 6.48.2
- A few minor updates have been implemente


SEO SpyGlass 6.48.1
- A few minor updates have been implemented


SEO SpyGlass 6.48
- A new feature in SEO SpyGlass: receive automatic alerts and notifications if there are detected any new/lost backlinks and new/lost referring domains


SEO SpyGlass 6.47.5
- A few minor updates have been implemented in SEO SpyGlass


SEO SpyGlass 6.47.4
- A few minor issues have been resolved in SEO SpyGlass


SEO SpyGlass 6.47.3
- A few minor issues have been resolved in SEO SpyGlass


SEO SpyGlass 6.47.2
Miscellaneous:
- A few minor issues have been resolved in SEO SpyGlass


SEO SpyGlass 6.47.1
- Fixed: the historical data calendar does not fit the window size when changing the interface language in SpyGlass


SEO SpyGlass 6.47
- Fixed: SEO SpyGlass's file chooser not seeing files on MacOS Catalina


SEO SpyGlass 6.46.6
Miscellaneous:
- A few interface-related issues have been fixed in SEO SpyGlass


SEO SpyGlass 6.46.5
- Some performance updates have been released


SEO SpyGlass 6.46.4
- Fixed minor errors for project workspaces in SEO SpyGlass


SEO SpyGlass 6.46.2
- A few minor issues have been fixed


SEO SpyGlass 6.46.1
- A few minor issues have been fixed


SEO SpyGlass 6.46
- A few minor issues have been fixed in SEO SpyGlass


SEO SpyGlass 6.45.9
Miscellaneous:
- Whois subdomain checkup has been updated and a few other minor issues have been fixed in SEO SpyGlass


SEO SpyGlass 6.45.8
- A new language added: Japanese version of SEO SpyGlass has been released. The problem of collecting backlinks from GSC has been fixed in SEO SpyGlass


SEO SpyGlass 6.45.7
- Some performance updates and bug fixes have been implemented in SEO SpyGlass


SEO SpyGlass 6.45.6
- Some minor issues have been fixed in SEO SpyGlass


SEO SpyGlass 6.45.5
- A few minor bugs have been fixed


SEO SpyGlass 6.45.4
- Some performance updates and bug fixes have been implemented


SEO SpyGlass 6.45.3
- A few minor bugs have been fixed


SEO SpyGlass 6.45.2
- A few minor bugs have been fixed


SEO SpyGlass 6.45.1
- A few minor bugs have been fixed


SEO SpyGlass 6.45
Miscellaneous:
- The new Historical Data module has been released in SEO SpyGlass: check out how many backlinks your website earned and lost in different periods of its history


SEO SpyGlass 6.43.5
- The problem of calculating Domain Strength for new projects and a few other minor bugs have been fixed


SEO SpyGlass 6.43.4
- A few minor bugs have been fixed


SEO SpyGlass 6.43.3
- A few minor bugs have been fixed


SEO SpyGlass 6.43.2
- Some performance updates have been implemented


SEO SpyGlass 6.43.1
- The Bulk Analysis module has been updated and improved in SEO SpyGlass: now you may collect domains' organic traffic stats and find out how many keywords your competitors are ranking for in Google


SEO SpyGlass 6.42.3
- Some performance updates have been implemented


SEO SpyGlass 6.42.2
- Some performance updates have been implemented


SEO SpyGlass 6.42.1
- A few minor bugs have been fixed


SEO SpyGlass 6.42
- Some performance updates have been implemented


SEO SpyGlass 6.41.2
- A few minor issues have been fixed


SEO SpyGlass 6.41
- Some performance updates have been implemented


SEO SpyGlass 6.40.15
- Change log not available for this version


SEO SpyGlass 6.40.14
- New settings added to SEO SpyGlass Preferences
- Misc. Global Settings: let the software minimize into tray when performing scheduled tasks
- A few minor bugs have been fixed


SEO SpyGlass 6.40.13
- A few minor issues have been fixed


SEO SpyGlass 6.40.12
- A few minor bugs have been fixed


SEO SpyGlass 6.40.11
- The Whois database for domains IPs has been updated


SEO SpyGlass 6.40.10
- A few minor bugs have been fixed


SEO SpyGlass 6.40.9
- The problem of opening projects from SEO PowerSuite Cloud has been resolved in SEO SpyGlass


SEO SpyGlass 6.40.8
- A few minor bugs have been fixed


SEO SpyGlass 6.40.7
- A few minor bugs have been fixed and some performance updates have been implemented


SEO SpyGlass 6.40.5
- Minor bug-fixes and stability improvements added


SEO SpyGlass 6.40.4
- The problem of connecting proxies to SEO SpyGlass has been fixed and other minor bugs resolved


SEO SpyGlass 6.40.3
- A few minor bugs have been fixed and some performance updates have been implemented in SEO SpyGlass


SEO SpyGlass 6.40.2
- Some performance updates have been implemented


SEO SpyGlass 6.33.5
- A few minor bugs have been fixed in SEO Spyglass


SEO SpyGlass 6.33.4
- Fixed the problem with SEO SpyGlass modal windows on MacOS that opened under the main window


SEO SpyGlass 6.33.3
- Improved UI for minimized interface view and for screens with low resolution and some other minor bugs have been fixed in SEO SpyGlass


SEO SpyGlass 6.33.2
- Fixed duplicated dates for the Backlink Summary graph in SEO SpyGlass


SEO SpyGlass 6.33.1
- New SEO SpyGlass version with improved memory utilization algorithm for 64-bit Windows machines


SEO SpyGlass 6.33
- Several bugs have been fixed and UX improvements implemented in SEO SpyGlass

更新時間：2021-01-17
更新細節：

What's new in this version:

LinkAssistant 6.37.6
- Change log not available for this version


LinkAssistant 6.37.5
- Change log not available for this version


LinkAssistant 6.37.4
Miscellaneous:
- Updated algorithm for comparing prospects on domain level, improved feed-sorting algorithm and other minor changes implemented in LinkAssistant


LinkAssistant 6.37.3
- Change log not available for this version


LinkAssistant 6.37.2
- A few minor improvements have been implemented and some errors fixed in LinkAssistant


LinkAssistant 6.37.1
- Excluded domains list has been updated, a few other minor errors fixed in LinkAssistant


LinkAssistant 6.37
Miscellaneous:
- Find better backlink opportunities and do niche research with the new search module in LinkAssistant


LinkAssistant 6.36.14
- A few minor enhancements have been implemented in LinkAssistant


LinkAssistant 6.36.12
- Backlink protocol validator has been updated in LinkAssistant


LinkAssistant 6.36.11
- Some performance updates have been implemented in LinkAssistant


LinkAssistant 6.36.10
- Change log not available for this version


LinkAssistant 6.36.9
- A few performance updates have been implemented in LinkAssistant


LinkAssistant 6.36.8
- Change log not available for this version


LinkAssistant 6.36.7
- Change log not available for this version


LinkAssistant 6.36.6
- Autumn sale announcement: get up to 70% off SEO PowerSuite


LinkAssistant 6.36.5
- Google Ads keyword Planner synchronization failure has been fixed in LinkAssistant


LinkAssistant 6.36.4
- Change log not available for this version


LinkAssistant 6.36.3
- Resetting of time settings of the task scheduler and some other minor issues have been fixed in LinkAssistant


LinkAssistant 6.36.2
- A few minor issues have been fixed and some interface translations have been updated in LinkAssistant


LinkAssistant 6.36.1
- Change log not available for this version


LinkAssistant 6.36
- French interface has been updated and a few other minor updates released in LinkAssistant


LinkAssistant 6.35.14
- Major Domain InLink Rank update has been released and a few other minor issues fixed in LinkAssistant


LinkAssistant 6.35.13
- Change log not available for this version


LinkAssistant 6.35.12
- Change log not available for this version


LinkAssistant 6.35.11
- Change log not available for this version


LinkAssistant 6.35.10
- Change log not available for this version


LinkAssistant 6.35.9
- Change log not available for this version


LinkAssistant 6.35.8
- Change log not available for this version


LinkAssistant 6.35.7
- Change log not available for this version


LinkAssistant 6.35.6
- Change log not available for this version


LinkAssistant 6.35.5
- A few minor updates have been implemented in LinkAssistant


LinkAssistant 6.35.3
- Change log not available for this version


LinkAssistant 6.35.2
- A few minor updates have been implemented in LinkAssistant


LinkAssistant 6.35.1
- A few minor updates have been implemented in LinkAssistant


LinkAssistant 6.35
- Change log not available for this version


LinkAssistant 6.34.5
- A few minor updates have been implemented in LinkAssistant


LinkAssistant 6.34.4
Miscellaneous:
- A few minor performance updates have been released in LinkAssistant


LinkAssistant 6.34.2
Miscellaneous:
- LinkAssistant has been adjusted to some changes in Google Ads Keyword Planner interface


LinkAssistant 6.34.1
- A few minor issues have been fixed in LinkAssistant


LinkAssistant 6.34
- Fixed: LinkAssistant's file chooser not seeing files on MacOS Catalina


LinkAssistant 6.33.6
- Fixed unresponsive buttons and elements for big size interfaces in LinkAssistant


LinkAssistant 6.33.5
- A few minor issues have been fixed


LinkAssistant 6.33.4
- A few minor issues have been fixed


LinkAssistant 6.33.2
- A few minor issues have been fixed


LinkAssistant 6.33
- A few minor issues have been fixed


LinkAssistant 6.32.9
- Change log not available for this version


LinkAssistant 6.32.8
- Change log not available for this version


LinkAssistant 6.32.7
- Change log not available for this version


LinkAssistant 6.32.6
- A few minor issues solved


LinkAssistant 6.32.5
- A few minor issues solved


LinkAssistant 6.32.4
- Some performance updates have been implemented


LinkAssistant 6.32.3
- Some performance updates have been implemented


LinkAssistant 6.32.2
- A few minor issues have been fixed


LinkAssistant 6.32.1
- A few minor issues have been fixed


LinkAssistant 6.32
- A few minor issues have been fixed


LinkAssistant 6.30.5
- The problem of calculating Domain Strength for new projects and a few other minor bugs have been fixed


LinkAssistant 6.30.4
- A few minor issues have been fixed


LinkAssistant 6.30.3
- Some performance updates have been implemented


LinkAssistant 6.30.2
- A few minor issues have been fixed


LinkAssistant 6.30.1
- A few minor issues have been fixed


LinkAssistant 6.29.3
- Some performance updates have been implemented


LinkAssistant 6.29.2
- The problem of connecting personal Google Ads Keyword Planner account has been fixed


LinkAssistant 6.29.1
- A few minor issues have been fixed


LinkAssistant 6.29
- A few minor issues have been fixed


LinkAssistant 6.28.2
- Fixed: collecting keyword suggestions from Google Ads has been resolved


LinkAssistant 6.28.1
- Change log not available for this version


LinkAssistant 6.28
- Some performance updates have been implemented


LinkAssistant 6.27.15
- Change log not available for this version


LinkAssistant 6.27.14
- New settings added to LinkAssistant Preferences
- Misc. Global Settings: let the software minimize into tray when performing scheduled tasks
- A few minor bugs have been fixed.


LinkAssistant 6.27.13
- Some performance updates have been implemented


LinkAssistant 6.27.12
- A few minor bugs have been fixed


LinkAssistant 6.27.11
- The Whois database for domains IPs has been updated


LinkAssistant 6.27.10
- LinkAssistant has been adjusted to the new changes of language settings for Google Keyword Planner.


LinkAssistant 6.27.9
- A few minor bugs have been fixed and some performance updates have been implemented


LinkAssistant 6.27.8
- A few performance updates have been implemented


LinkAssistant 6.27.7
- A few minor bugs have been fixed: incorrect selection of search engines for keyword difficulty, the error exception when creating a new project for non-existing TLD and a few other bugs have been resolved


LinkAssistant 6.27.5
- A few minor bugs have been fixed and some performance updates have been implemented


LinkAssistant 6.27.4
- The problem of connecting proxies to LinkAssistant has been fixed and other minor bugs resolved


LinkAssistant 6.27.3
- A few minor bugs have been fixed and some performance updates have been implemented


LinkAssistant 6.27.2
- LinkAssistant has been updated for the new changes in Google Ads Keyword Planner markup


LinkAssistant 6.27.1
- A few issues have been fixed


LinkAssistant 6.27
- Miscellaneous: backlink verification algorithm has been updated and improved, a new factor added: Yandex SQI


LinkAssistant 6.26.11
- Domain Strength update problem has been resolved


LinkAssistant 6.26.10
- A few minor bugs have been fixed and several performance updates have been implemented


LinkAssistant 6.26.9
- A few minor bugs have been fixed


LinkAssistant 6.26.8
- A new 'properties' element has been added to Google Analytics settings in LinkAssistant to help users find and connect the right view


LinkAssistant 6.26.7
- Interface scaling parameters have been updated and a few other minor issues fixed


LinkAssistant 6.26.6
- A few minor issues have been resolved


LinkAssistant 6.26.5
- A few minor bugs have been fixed


LinkAssistant 6.26.4
- Software auto-update process has been improved for apps that have scheduled tasks, the problem of displaying incorrect characters for project names with cyrillic symbols has been fixed


LinkAssistant 6.26.3
- A number of issues were fixed in LinkAssistant, including problems with incorrect characters in saved project names, alphabetic sorting for scheduled tasks, background task interruption during auto-updates, and many other minor improvements


LinkAssistant 6.26.2
- New search engine added: Google Afghanistan. Issues fixed in LinkAssistant: problems with collecting backlinks for websites with German interface, incorrect detection of user country for Google Catalonia and a few other minor bugs


LinkAssistant 6.26.1
- Synchronization of project and global settings has been added to LinkAssistant: synchronize customer and company profiles, Google accounts, project and global events across different projects and apps


LinkAssistant 6.25.3
- IP library has been updated and some minor issues have been fixed


LinkAssistant 6.25.2
- The link directory generator and proxy rotation features have been fixed


LinkAssistant 6.25.1
- A new index has been applied for calculation of InLink Rank and Domain Strength metrics


LinkAssistant 6.23.23
- The software auto-update mechanism for background tasks has been improved. A few issues have been fixed: the time counter for captcha window failed to be reset upon mouse movement and several other minor issues have been solved


LinkAssistant 6.23.22
- A few issues have been fixed: incorrect status for completed scheduled tasks and several other minor issues have been solved


LinkAssistant 6.23.21
- The internal browser has been improved and adjusted for better interaction with Google re-captcha. A few other minor issues have been fixed


LinkAssistant 6.23.20
- A few minor issues have been fixed


LinkAssistant 6.23.19
- A new change for automatic software updates has been implemented: new version releases will be skipped by applications that have active tasks running in the background


LinkAssistant 6.23.18
- New features have been added to LinkAssistant: create scheduled tasks only for project records that are marked with specific tags; pause and resume the execution of tasks; new selection mode available: now it is possible to select only several columns to copy results from a project workspace


LinkAssistant 6.23.17
- A few minor issues have been fixed


LinkAssistant 6.23.16
- An issue has been fixed: the quick filter now can recognize new tags of the prospects that have been added manually or imported into the project


LinkAssistant 6.23.15
- LinkAssistant has been adjusted to the new Google Ads interface


LinkAssistant 6.23.14
- Change log not available for this version


LinkAssistant 6.23.13
- Some performance updates have been implemented


LinkAssistant 6.23.12
- A few minor bugs have been fixed


LinkAssistant 6.23.11
- Fixed the problem of generating report names with cyrillic characters


LinkAssistant 6.23.10
- fixed the text encoding issue for Spanish and French installation wizards
- a new search engine Google.kg has been added


LinkAssistant 6.23.9
- A few minor bugs have been fixed


LinkAssistant 6.23.8
- The algorithm for connecting to Google Adwords account has been updated in LinkAssistant


LinkAssistant 6.23.7
- The algorithm for updating Alexa Rank has been optimized and improved


LinkAssistant 6.23.6
- A few minor bugs have been fixed in LinkAssistant


LinkAssistant 6.23.5
- The performance of the internal browser has been optimized and improved


LinkAssistant 6.23.4
- A few minor bugs have been fixed


LinkAssistant 6.23.3
- Minor performance updates have been implemented and a few bugs have been fixed


LinkAssistant 6.23.2
- A few minor bugs have been fixed


LinkAssistant 6.23
- A few minor bugs have been fixed


LinkAssistant 6.22.9
- Some performance updates have been implemented


LinkAssistant 6.22.8
- A few minor bugs have been fixed


LinkAssistant 6.22.7
- The whois library for checking domain age has been updated


LinkAssistant 6.22.6
- A few minor bugs have been fixed


LinkAssistant 6.22.5
- The problem of blurred interface on retina displays has been fixed


LinkAssistant 6.22.4
- Some performance updates have been implemented


LinkAssistant 6.22.3
- Some performance updates have been implemented


LinkAssistant 6.22.2
- A few minor bugs have been fixed


LinkAssistant 6.22.1
- A few minor bugs have been fixed


LinkAssistant 6.22
- Change log not available for this version


LinkAssistant 6.21.7
- Some performance updates have been implemented


LinkAssistant 6.21.6
- The fix for new Google Adwords Keyword Planner interface has been implemented


LinkAssistant 6.21.5
- A few minor bugs have been fixed


LinkAssistant 6.21.4
- A few minor bugs have been fixed


LinkAssistant 6.21.3
- A few minor bugs have been fixed


LinkAssistant 6.21.2
- A few minor bugs have been fixed


LinkAssistant 6.21.1
- A few minor bugs have been fixed


LinkAssistant 6.21
- A few minor bugs and java-related issues have been fixed


LinkAssistant 6.20.5
- A few minor bugs have been fixed


LinkAssistant 6.20.4
- Fixed the problem with LinkAssistant modal windows on MacOS that opened under the main window


LinkAssistant 6.20.3
- Improved UI for minimized interface view and for screens with low resolution and some other minor bugs have been fixed


LinkAssistant 6.20.2
- A few minor bugs have been fixed


LinkAssistant 6.20.1
- New LinkAssistant version with improved memory utilization algorithm for 64-bit Windows machines


LinkAssistant 6.20
- Several bugs have been fixed and UX improvements implemented

更新時間：2021-01-17
更新細節：

What's new in this version:

ImageMagick 7.0.10-58 (64-bit)
- identify the convex hull and minimum bounding box attributes of an image with the -define identify:convex-hull=true define
- set the quality to 100 to produce lossless HEIC images
- properly identify SVG images
- duplicate operator: inverse range parameter working again


ImageMagick 7.0.10-57 (64-bit)
- update automake/aucong configuration files


ImageMagick 7.0.10-56 (64-bit)
- Change log not available for this version


ImageMagick 7.0.10-55 (64-bit)
- Change log not available for this version


ImageMagick 7.0.10-53 (64-bit)
- Release ImageMagick version 7.0.10-53


ImageMagick 7.0.10-52 (64-bit)
- return alpha bytes with stream utility
- percentage -border in x no longer adds one pixel border in y


ImageMagick 7.0.10-51 (64-bit)
- reduce time to identify PDF/PS/XPS/PCL image width/height


ImageMagick 7.0.10-50 (64-bit)
- revert patch to ready gray alpha TIFF image


ImageMagick 7.0.10-49 (64-bit)
- correct previous patch to read planar RGB TIFF images


ImageMagick 7.0.10-48 (64-bit)
- Repair unit test failures


ImageMagick 7.0.10-47 (64-bit)
- support YAML image format
- use generic TIFF read method for LZW-compressed strips


ImageMagick 7.0.10-46 (64-bit)
- possible TIFF related-heap buffer overflow
- set default system fault in policy.xml configuration file
- support portable float map format 16-bit half


ImageMagick 7.0.10-45 (64-bit)
- added support for the farbfeld format


ImageMagick 7.0.10-44 (64-bit)
- correct reading of first row in TIFF decoder


ImageMagick 7.0.10-43 (64-bit)
- add padding to AcquirePolicyString()


ImageMagick 7.0.10-42 (64-bit)
- revert memory patch to avert possible thread lock
- add support for FilmLight FL32 image format


ImageMagick 7.0.10-41 (64-bit)
- Change log not available for this version


ImageMagick 7.0.10-39 (64-bit)
- support DPX 4:2:2 sampling.
- fix shell injection vulnerability via the -authenticate option


ImageMagick 7.0.10-38 (64-bit)
- add image settings support to -fx
- better support for TIFF YCbCr photometric
- verify TTF glyph format before dereferencing
- force single HEIC image per container


ImageMagick 7.0.10-37 (64-bit)
- correct soversioning


ImageMagick 7.0.10-35 (64-bit)
- Prefer ffmpeg over avconv
- Support median image statistic and median property
- Add -extend option to {display,animate,import}


ImageMagick 7.0.10-34 (64-bit)
- Check for linux-compatible sendfile()


ImageMagick 7.0.10-33 (64-bit)
- miscellaneous clean-up


ImageMagick 7.0.10-32 (64-bit)
- Change log not available for this version


ImageMagick 7.0.10-31 (64-bit)
- Change log not available for this version


ImageMagick 7.0.10-30 (64-bit)
- Change log not available for this version


ImageMagick 7.0.10-29 (64-bit)
- Change log not available for this version


ImageMagick 7.0.10-28 (64-bit)
- Distorted clip path after -extent
- Paths in Photoshop EPS files are corrupted on conversion


ImageMagick 7.0.10-27 (64-bit)
- Change log not available for this version


ImageMagick 7.0.10-26 (64-bit)
- Add animated webp blend method support
- Add support for OpenRaster (.ora) image format
- Paths in Photoshop EPS files are no longer corrupted


ImageMagick 7.0.10-25 (64-bit)
- Change log not available for this version


ImageMagick 7.0.10-24 (64-bit)
- Change log not available for this version


ImageMagick 7.0.10-23 (64-bit)
- Change log not available for this version


ImageMagick 7.0.10-22 (64-bit)
- Change log not available for this version


ImageMagick 7.0.10-21 (64-bit)
- Change log not available for this version


ImageMagick 7.0.10-20 (64-bit)
- Fix out-of-bounds vulnerability when reading sixel images


ImageMagick 7.0.10-19 (64-bit)
- Change log not available for this version


ImageMagick 7.0.10-18 (64-bit)
- Change log not available for this version


ImageMagick 7.0.10-17 (64-bit)
- Change log not available for this version


ImageMagick 7.0.10-16 (64-bit)
- Change log not available for this version


ImageMagick 7.0.10-15 (64-bit)
- Change log not available for this version


ImageMagick 7.0.10-14 (64-bit)
- Change log not available for this version


ImageMagick 7.0.10-13 (64-bit)
- Change log not available for this version


ImageMagick 7.0.10-12 (64-bit)
- Change log not available for this version


ImageMagick 7.0.10-11 (64-bit)
- Change log not available for this version


ImageMagick 7.0.10-10 (64-bit)
- Change log not available for this version


ImageMagick 7.0.10-9 (64-bit)
- Change log not available for this version


ImageMagick 7.0.10-8 (64-bit)
- Change log not available for this version


ImageMagick 7.0.10-7 (64-bit)
- Change log not available for this version


ImageMagick 7.0.10-6 (64-bit)
- Change log not available for this version


ImageMagick 7.0.10-5 (64-bit)
- Change log not available for this version


ImageMagick 7.0.10-3 (64-bit)
- The -charcoal option should ignore the alpha channel
- Fix numerical instability issue when drawing lines
- Improve mono font rendering


ImageMagick 7.0.10-2 (64-bit)
- Change log not available for this version


ImageMagick 7.0.10-1 (64-bit)
- Add support for returning the convex hull of an image with the %[canvas-hull] property.Added option to specify the preferred version when writing a PDF file with -define pdf:version=version (e.g. 1.7)
- Do not throw exception on empty draw path
- Fix possible buffer overflow in ComplexImages()
- SVG to MVG requires transforms to appear before clipping paths


ImageMagick 7.0.10-0 (64-bit)
- Label text no longer gets cut-off
- Prevent heap overflow


ImageMagick 7.0.9-27 (64-bit)
- No percent sign in lab() color
- Introducing the -color-threshold command-line option
- Handle out of range HDRI values for -statistic option
- Fix improper casting when computing image signature


ImageMagick 7.0.9-26 (64-bit)
- No percent sign in lab() color
- Introducing the -color-threshold command-line option
- Handle out of range HDRI values for -statistic option
- Fix improper casting when computing image signature


ImageMagick 7.0.9-25 (64-bit)
- Adapt to a change in command-line options in the SVG inkscape delegate
- No percent sign in lab() color


ImageMagick 7.0.9-24 (64-bit)
- Support connected-components:eccentricity-threshold, connected-components:major-axis-threshold, connected-components:minor-axis-threshold, connected-components:angle-threshold
- Set the alpha channel if the write mask is not enabled
- Corrected ellipse orientation when computing image moments


ImageMagick 7.0.9-23 (64-bit)
- Report gray(127.5) as gray(50%).
- Support -define connected-components:perimeter-threshold=min-max


ImageMagick 7.0.9-22 (64-bit)
- More work on connect components, e.g. keep-colors, remove-colors, keep-topids
- Initialize mutex before locking if its not already initialized


ImageMagick 7.0.9-21 (64-bit)
- Change log not available for this version


ImageMagick 7.0.9-20 (64-bit)
- Support addition connected components defines
- Refresh cache morphology when writing MPC images


ImageMagick 7.0.9-19 (64-bit)
- Make PNG creation reproducible (reference https://github.com/ImageMagick/ImageMagick/pull/1270)
- Refactor uninitialize variable patch for -fx "while(,)" expression


ImageMagick 7.0.9-17 (64-bit)
- Allow larger negative interline spacing
- Conditional compile for huge xml pages for RSVG delegate library
- Put "width" property in the PNG namespace
- combine -colorspace sRGB no longer returns grayscale output
- Support Jzazbz colorspace


ImageMagick 7.0.9-16 (64-bit)
- Change log not available for this version


ImageMagick 7.0.9-14 (64-bit)
- Support extended Fx assignment operators (e.g. *=, /=, ++, --, etc.)
- Support Fx for() iterator
- Optimize Fx performance
- Ensure circle.rb renders the same for IMv6 and IMv7


ImageMagick 7.0.9-12 (64-bit)
- Fix Build failure with MinGW-w64 (reference https://github.com/ImageMagick/ImageMagick6/issues/67)
- Inject image profile properties immediately after the image is read


ImageMagick 7.0.9-11 (64-bit)
- Replace pseudo-random number generator with a Xoshiro generator
- The -layers optimize option requires a fully transparent previous image


ImageMagick 7.0.9-10 (64-bit)
- Some clang releases do not support _aligned_alloc()
- Support -kmeans command-line option


ImageMagick 7.0.9-9 (64-bit)
- Build file clean-up
- Improve semaphore handling
- Introduce HeapOverflowSanityCheckGetExtent() method
- The -layers optimize option requires a fully transparent previous image


ImageMagick 7.0.9-7 (64-bit)
- Support Pocketmod image format
- Fixed numerous issues


ImageMagick 7.0.9-6 (64-bit)
- Increase the maximum number of bezier coordinates (reference https://github.com/ImageMagick/ImageMagick/issues/1784)
- Santize "'" from SHOW and WIN delegates under Linux, '"' for Windows (thanks to Enzo Puig)
- Correct for TGA orientation (reference https://imagemagick.org/discourse-server/viewtopic.php?f=3&t=34757)
- The result for -compose Copy -extent on a MYK image is CMYK (reference https://imagemagick.org/discourse-server/viewtopic.php?f=3&t=37118)
- Fix potential buffer overflow when reading a fax image (alert from Justin)
- Support dng:use-camera-wb option


ImageMagick 7.0.9-5 (64-bit)
- Ensure Ascii85 compression is thread safe
- Fixed numerous issues posted to GitHub


ImageMagick 7.0.9-4 (64-bit)
- Change log not available for this version


ImageMagick 7.0.9-3 (64-bit)
- Santize ';' from SHOW and WIN delegates
- Add exception parameter to CMS transform methods
- Output exception there is an attempt to perform an operation not allowed by the security policy
- Fixed numerous issues posted to GitHub


ImageMagick 7.0.9-2 (64-bit)
- Change log not available for this version


ImageMagick 7.0.9-1 (64-bit)
- Change log not available for this version


ImageMagick 7.0.8-68 (64-bit)
- Support animated WebP encoding/decoding
- Text stroke cut off
- Adds support for lossless JPEG1 recompression


ImageMagick 7.0.8-67 (64-bit)
- Line endings renedered as empty boxes


ImageMagick 7.0.8-66 (64-bit)
- Change log not available for this version


ImageMagick 7.0.8-65 (64-bit)
- Eliminate fault when trace delegate is not available.
- Properly distinquish linear and non-linear gray colorspaces


ImageMagick 7.0.8-64 (64-bit)
- Change log not available for this version


ImageMagick 7.0.8-63 (64-bit)
- Properly identify the DNG and AI image format


ImageMagick 7.0.8-62 (64-bit)
- Added option to limit the maximum point size with -define caption:max-pointsize=pointsize
- Corrected JP2 numresolution calculation


ImageMagick 7.0.8-61 (64-bit)
- Fixed an issue with -background and -swirl


ImageMagick 7.0.8-60 (64-bit)
- Enable reading EXR image file from stdin


ImageMagick 7.0.8-59 (64-bit)
- Change log not available for this version


ImageMagick 7.0.8-58 (64-bit)
- Improve GetNextToken() performance


ImageMagick 7.0.8-56 (64-bit)
- Unexpected -alpha shape results
- Converting from PDF to PBM inverts the image

更新時間：2021-01-17
更新細節：

更新時間：2021-01-17
更新細節：

What's new in this version:

WebSite Auditor 4.48.6
- Change log not available for this version


WebSite Auditor 4.48.5
- Change log not available for this version


WebSite Auditor 4.48.4
Miscellaneous:
- Fixed too small application window size because of a broken property file and other minor enhancements have been implemented in WebSite Auditor


WebSite Auditor 4.48.3
- Fixed too small application window size because of a broken property file and other minor enhancements have been implemented in WebSite Auditor


WebSite Auditor 4.48.2
- Change log not available for this version


WebSite Auditor 4.48.1
- A few minor improvements have been implemented and some errors fixed in WebSite Auditor


WebSite Auditor 4.48
- A few minor enhancements and performance improvements have been implemented in WebSite Auditor


WebSite Auditor 4.47.14
- A few minor enhancements have been implemented in WebSite Auditor


WebSite Auditor 4.47.12
- A few minor enhancements have been implemented in WebSite Auditor


WebSite Auditor 4.47.11
- Robots.txt validator has been improved in WebSite Auditor


WebSite Auditor 4.47.10
- A few performance updates have been implemented in WebSite Auditor


WebSite Auditor 4.47.9
- A few performance updates have been implemented in WebSite Auditor


WebSite Auditor 4.47.8
- Keyword count algorithm for Page Audit has been updated in WebSite Auditor


WebSite Auditor 4.47.7
Miscellaneous:
- A few performance updates have been implemented in WebSite Auditor


WebSite Auditor 4.47.6
Miscellaneous:
- Autumn sale announcement: get up to 70% off SEO PowerSuite


WebSite Auditor 4.47.5
New feature:
- Fixed the problem of removal of page content after mapping new keywords to a page in WebSite Auditor's Content Editor module


WebSite Auditor 4.47.4
New feature:
- Competitors' keywords highlighting has been fixed and some other minor improvements implemented in WebSite Auditor


WebSite Auditor 4.47.3
New feature:
- Resetting of time settings of the task scheduler and some other minor issues have been fixed in WebSite Auditor


WebSite Auditor 4.47.2
- Incorrect broken images analysis and a few other minor issues have been fixed in WebSite Auditor


WebSite Auditor 4.47.1
New:
- Fixed non-finishing Java processes after closing WebSite Auditor and some other enhancements have been implemented


WebSite Auditor 4.47
- French interface has been updated and a few other minor updates released in Website Auditor


WebSite Auditor 4.46.14
- Major Domain InLink Rank update has been released and a few other minor issues fixed in Website Auditor


WebSite Auditor 4.46.13
- Change log not available for this version


WebSite Auditor 4.46.12
- Change log not available for this version


WebSite Auditor 4.46.11
- Change log not available for this version


WebSite Auditor 4.46.10
- Change log not available for this version


WebSite Auditor 4.46.9
- Change log not available for this version


WebSite Auditor 4.46.8
- Change log not available for this version


WebSite Auditor 4.46.7
- Change log not available for this version


WebSite Auditor 4.46.6
- Change log not available for this version


WebSite Auditor 4.46.5
- Change log not available for this version


WebSite Auditor 4.46.3
- A few minor updates have been implemented


WebSite Auditor 4.46.2
- Incorrect parsing of tel, mailto and some other elements has been fixed


WebSite Auditor 4.46.1
- Incorrect parsing of noindex instructions on some pages, Yandex cache date verification have been fixed


WebSite Auditor 4.46
- Change log not available for this version


WebSite Auditor 4.45.5
- A few minor updates have been implemented


WebSite Auditor 4.45.4
- Fixed the error exception when editing workspace columns in WebSite Auditor


WebSite Auditor 4.45.3
- A few minor issues have been resolved in WebSite Auditor


WebSite Auditor 4.45.2
New feature:
- Updated text recommendations for the Page Audit section, fixed non-updating optimization rate for the Content Editor section


WebSite Auditor 4.45.1
- Fixed: incorrect keyword count issue in WebSite Auditor's Content Editor


WebSite Auditor 4.45
- Change log not available for this version


WebSite Auditor 4.44.6
- Fixed unresponsive buttons and elements for big size interfaces in WebSite Auditor


WebSite Auditor 4.44.5
- Fixed errors that appeared when fetching Google snippets for long titles, the problem of including a page title inside the body tag for certain pages has been solved


WebSite Auditor 4.44.4
- Some performance updates have been released in WebSite Auditor


WebSite Auditor 4.44.2
- A few minor bugs have been fixed


WebSite Auditor 4.44.1
New feature:
- Fixed unavailable optimization scores in the Site Structure -> Pages module in Website Auditor


WebSite Auditor 4.44
New feature:
- New Content Editor has been released in Website Auditor: create new content for pages using the new document mode, get optimization advise for the existing pages and generate PDF guidelines with optimization instructions for your copywriters.


WebSite Auditor 4.43.9
New feature:
- Whois subdomain checkup has been updated and a few other minor issues have been fixed in Website Auditor


WebSite Auditor 4.43.8
New feature:
- A few performance adjustments have been made for 32-bit machines in Website Auditor


WebSite Auditor 4.43.7
- The problem of resetting user-agents from mobile to desktop version for Content Editor has been fixed in Website Auditor


WebSite Auditor 4.43.6
- Yahoo Japan search engine error has been fixed


WebSite Auditor 4.43.5
- Fixed the problem of opening projects from SEO PowerSuite Cloud on Windows for WebSite Auditor


WebSite Auditor 4.43.4
- A new feature added: now you can add tags to resources under the 'All Resources' section


WebSite Auditor 4.43.3
- A few minor bugs have been fixed


WebSite Auditor 4.43.2
- A few minor bugs have been fixed


WebSite Auditor 4.41.5
- The problem of calculating Domain Strength for new projects and a few other minor bugs have been fixed


WebSite Auditor 4.41.4
- Some performance updates have been implemented


WebSite Auditor 4.41.3
- Some performance updates have been implemented


WebSite Auditor 4.41.2
- Some performance updates have been implemented


WebSite Auditor 4.41.1
- The problem of incorrect counts of warnings and errors for the Localization section and a few other minor issues have been fixed


WebSite Auditor 4.40.3
- Some performance updates have been implemented


WebSite Auditor 4.40.2
- Some performance updates have been implemented


WebSite Auditor 4.40.1
- A few minor bugs have been fixed


WebSite Auditor 4.40
- Some performance updates have been implemented


WebSite Auditor 4.39.2
- A few minor bugs have been fixed


WebSite Auditor 4.39.1
- Change log not available for this version


WebSite Auditor 4.39
- A new option added: accept/ignore cookies when scanning a website; the parsing of lazyload images has been improved, the keyword count for Content Analysis has been improved


WebSite Auditor 4.38.15
- Change log not available for this version


WebSite Auditor 4.38.14
- New settings added to SEO SpyGlass Preferences
- Misc. Global Settings: let the software minimize into tray when performing scheduled tasks
- A few minor bugs have been fixed


WebSite Auditor 4.38.13
- The problem of not recognizing nofollow tags for certain pages has been fixed


WebSite Auditor 4.38.12
- A few minor issues have been fixed


WebSite Auditor 4.38.10
- A few minor bugs have been fixed


WebSite Auditor 4.38.9
New feature:
- Webcal has been added to the list of protocols


WebSite Auditor 4.38.8
- A few minor bugs have been fixed


WebSite Auditor 4.38.7
New feature:
- The problem of incorrect Missing Return Links count in the Localization group has been fixed


WebSite Auditor 4.38.5
- From now on, WebSite Auditor supports Google's updated PageSpeed Insights API, providing you with the most extensive information on your pages' speed performance


WebSite Auditor 4.38.4
- The problem of connecting proxies to WebSite Auditor has been fixed and other minor bugs resolved


WebSite Auditor 4.38.3
- Change log not available for this version


WebSite Auditor 4.38.2
- A few issues have been fixed in WebSite Auditor: the JavaScript timing settings have been improved, the keyword count algorithm for page analysis has been updated and some other minor bugs fixed


WebSite Auditor 4.38.1
- A few issues have been fixed


WebSite Auditor 4.38
- Miscellaneous: W3C libraries have been updated in Website Auditor. Dropbox connection updated: the software can use the proxy from Proxy Settings to connect to Dropbox


WebSite Auditor 4.37.11
- Domain Strength update problem and the issue of updating website's mobile thumbnail have been resolved


WebSite Auditor 4.37.10
- Several new columns have been added to the TF-IDF workspace under Content Analysis


WebSite Auditor 4.37.9
- A few minor issues have been fixed


WebSite Auditor 4.37.8
- A new 'properties' element has been added to Google Analytics settings in WebSite Auditor to help users find and connect the right view


WebSite Auditor 4.37.7
- Interface scaling parameters have been updated and a few other minor issues fixed


WebSite Auditor 4.37.6
- The algorithm for analyzing srcset source tags has been improved, a few minor issues have been fixed


WebSite Auditor 4.37.5
- The performance of page audit analysis has been improved, the algorithms for analyzing hreflang elements and x-robots-tags have been updated


WebSite Auditor 4.37.4
- Software auto-update process has been improved for apps that have scheduled tasks, the problem of displaying incorrect characters for project names with cyrillic symbols has been fixed


WebSite Auditor 4.37.3
- A number of issues were fixed in Website Auditor, including problems with incorrect characters in saved project names, alphabetic sorting for scheduled tasks, background task interruption during auto-updates, and many other minor improvements


WebSite Auditor 4.37.2
- New search engine added: Google Afghanistan. Issues fixed in WebSite Auditor: content analysis failed with 'Too many redirects' error for some pages, resource-size calculation algorithm has been updated


WebSite Auditor 4.37.1
- Synchronization of project and global settings has been added to LinkAssistant: synchronize customer and company profiles, Google accounts, project and global events across different projects and apps


WebSite Auditor 4.36.3
- Updated robots.txt parsing algorithm, the logic for pageviews collection has been improved


WebSite Auditor 4.36.2
- Fixed: the 'No Hreflang' filter for the Localization module
- Updated: the algorithm for 'Conflicting hreflang elements


WebSite Auditor 4.36.1
- A new feature has been added to WebSite Auditor: analyze multi-language/locale websites, detect incorrect usage of Hreflang attributes, create custom language variants for pages. A new index has been applied for calculation of InLink Rank and Domain Strength metrics


WebSite Auditor 4.34.23
- The software auto-update mechanism for background tasks has been improved and several other minor issues have been solved


WebSite Auditor 4.34.22
- Competition research algorithm has been updated, incorrect status for completed scheduled tasks and several other minor issues have been solved in WebSite Auditor


WebSite Auditor 4.34.21
- The internal browser has been improved and adjusted for better interaction with Google re-captcha. A few other minor issues have been fixed


WebSite Auditor 4.34.20
- A few minor issues have been fixed


WebSite Auditor 4.34.19
- The list of statuses for the Server Response Time column has been updated. A new change for automatic software updates has been implemented: new version releases will be skipped by applications that have active tasks running in the background


WebSite Auditor 4.34.18
- New features have been added to LinkAssistant: create scheduled tasks only for project records that are marked with specific tags; pause and resume the execution of tasks; new selection mode available: now it is possible to select only several columns to copy results from a project workspace


WebSite Auditor 4.34.17
- A few minor issues have been fixed


WebSite Auditor 4.34.16
- Some performance updates have been implemented


WebSite Auditor 4.34.15
- the robots.txt parser has been updated and a few other minor bugs have been fixed


WebSite Auditor 4.34.14
- Miscellaneous: A few issues have been fixed in Website Auditor: incorrect encoding was used for title characters when JavaScript was enabled in the project, URLs with cyrillic characters were incorrectly displayed for some websites


WebSite Auditor 4.34.13
- Some performance updates have been implemented


WebSite Auditor 4.34.12
- A few minor bugs have been fixed


WebSite Auditor 4.34.11
- The Website Auditor page parser has been updated: fixed the problems of keyword counts in body, keyword count in H1-H6 tags, the parsing algorithm has been improved


WebSite Auditor 4.34.10
- Change log not available for this version


WebSite Auditor 4.34.9
- A few minor bugs have been fixed


WebSite Auditor 4.34.8
- The TF-IDF keyword analysis algorithm has been improved for WebSite Auditor


WebSite Auditor 4.34.7
- The algorithm for updating Alexa Rank has been optimized and improved


WebSite Auditor 4.34.6
- Change log not available for this version


WebSite Auditor 4.34.5
- The performance of the internal browser has been optimized and improved


WebSite Auditor 4.34.4
- A few minor bugs have been fixed


WebSite Auditor 4.34.3
- Minor performance updates have been implemented and a few bugs have been fixed


WebSite Auditor 4.34.2
- A few minor bugs have been fixed


WebSite Auditor 4.34
- A few minor bugs have been fixed


WebSite Auditor 4.33.9
- A few minor bugs have been fixed


WebSite Auditor 4.33.8
- The noindex meta tag algorithm has been updated and a few other minor bugs have been fixed


WebSite Auditor 4.33.7
- The whois library for checking domain age has been updated and some other minor bugs have been fixed


WebSite Auditor 4.33.6
- A few minor bugs have been fixed


WebSite Auditor 4.33.5
- Viber has been added to the list of supported protocols, the application/rss+xml has been added to the list of supported sitemap content-types


WebSite Auditor 4.33.4
- A few minor bugs have been fixed


WebSite Auditor 4.33.3
- A few minor bugs have been fixed


WebSite Auditor 4.33.2
- The error counter for the Page Audit module has been fixed


WebSite Auditor 4.33.1
- A few minor bugs have been fixed


WebSite Auditor 4.33
- Edit your website structure, save visualization as PDF/PNG/SVG, label and color pages on the graph and other useful features have been added to Website Auditor. Some minor bugs have been fixed: word count for page body element, parsing pages that are using js elements and other minor issues


WebSite Auditor 4.32.7
- Some performance updates have been implemented


WebSite Auditor 4.32.6
- Some performance updates have been implemented


WebSite Auditor 4.32.5
- Change log not available for this version


WebSite Auditor 4.32.4
- A few minor issues have been fixed


WebSite Auditor 4.32.3
- Change log not available for this version


WebSite Auditor 4.32.2
- Now it is possible to edit the list of supported page extensions in project settings to let Website Auditor collect web-pages with custom extensions


WebSite Auditor 4.32.1
- The search algorithms for orphan pages and sitemap detection have been improved in Website Auditor


WebSite Auditor 4.32
- The pages with .mvc and .nspx extension are now supported in WebSite Auditor. The algorithm for detecting pages' charset type has been improved


WebSite Auditor 4.31.5
- Website Auditor now supports websites with .phtml and .wf extensions. The issue with the incorrect calculation of keywords in Page Audit report has been fixed.

更新時間：2021-01-17
更新細節：

更新時間：2021-01-17
更新細節：

What's new in this version:

- Bug: When recognizing the standard system language setting from 39 languages in NewFileTime
- Small adjustments and improvements

更新時間：2021-01-17
更新細節：

What's new in this version:

Bitvise SSH Client 8.46
SFTP:
- Since version 8.45, the SSH Client now uses SFTP v6 file open block flags SSH_FXF_BLOCK_WRITE and SSH_FXF_BLOCK_ADVISORY if the server advertises support for them. This helps avoid corruption of files while they are being transferred. We have received a report of a server that advertises support for these flags, but fails an open request if the flags are used. The SSH Client will now repeat an open request that fails this way, without the flags.

Command-line clients:
- When using Bitvise SSH Client command line clients sftpc, stermc, sexec, stnlc or spksc using a -keypairFile parameter that points to an encrypted keypair in non-Bitvise format, but without a -keypairPassphrase parameter that would provide a decryption passphrase, the SSH Client would display a cryptic error. The error is now less cryptic.


Bitvise SSH Client 8.45
Automatic updates:
- If the automatic update process encountered an error while downloading a new version installer from the primary download location, resulting in a partial executable being stored; and if download was then successful from the secondary download location; the resulting executable would be corrupted
- Improved the automatic update locking mechanisms

SSH:
- When displaying the host key received from the server, the SSH Client will now display the signature algorithm (e.g. RSA over SHA-256) rather than just the host key algorithm (e.g. RSA)

Graphical client:
- When the SSH Client was started hidden in the system notification area, it would cause a phantom Alt-Tab menu entry to appear

SFTP:
- When uploading files using SFTP v6; and if the server advertises support for either the block flag SSH_FXF_BLOCK_WRITE or the combination SSH_FXF_BLOCK_WRITE | SSH_FXF_BLOCK_ADVISORY; then the SSH Client will request one of these block flags when opening the file. This is to prevent premature actions by other server-side processes or file transfer clients that can modify or corrupt the file before the upload is complete.
- Uploading to a blind drop location that does not permit a directory listing could crash the SFTP window or the SSH Client process
- For improved compatibility with blind drops, it is now possible to navigate the Local and Remote panes to any location, even one that results in an error or does not allow a directory listing. An error dialog will be displayed when attempting to list such a directory, but it is now possible to try transferring files to or from such locations regardless.

Command-line clients:
- The log utility would output its own newlines as CRLF, but would record newlines from child processes as they were written by the process. If the child process used LF newlines (without CR), the output newline convention would be inconsistent. The log utility now consistently outputs newlines as CRLF.


Bitvise SSH Client 8.44
SSH:
- Bitvise SSH Client and FlowSsh will now recognize servers with "Maverick_SSHD" and "GoAnywhere" in their SSH version strings as variants of "J2SSH_Maverick". This means Bitvise SSH Client and FlowSsh will no longer send SSH_MSG_EXT_INFO by default to such servers. See the previous compatibility change for J2SSH_Maverick, in version history for Bitvise SSH Client and FlowSsh versions 8.42.
- If a client authentication key has been accepted by the server for authentication, the SSH Client will no longer prevent its use due to the server's server-sig-algs extension. In addition, the SSH Client will now log if a key is not used due to this extension.
- Graphical client:
- A new or reset profile will no longer open a terminal and SFTP window automatically, by default. This improves behavior when connecting to servers that limit SSH sessions to a single concurrent channel. Automatic opening of these windows can still be enabled using the same settings on the Options tab.
- The SSH Client's buttons would be hidden under Windows UI elements in Windows 10 Tablet mode. Fixed.
- The SSH Client will now display clearer information when an update is available but cannot be started.

Terminal:
- When using xterm and other non-bvterm protocols, the graphical SSH Client and stermc now support the sending of the following Alt + key combinations: Alt + Left Arrow, Right Arrow, Up Arrow, Down Arrow, Backspace, Page Up and Page Down. In addition, the graphical client also supports Alt + Enter. Alt + Enter is not supported in stermc because it is used by the Windows console to enter or exit full-screen mode
- When using xterm and other non-bvterm protocols, the speed of screen painting in the graphical SSH Client is now significantly improved
- The graphical SSH Client and stermc now support a terminal window resize initiated by an escape sequence from the server
- The graphical SSH Client and stermc will now accept xterm's 16-color and 256-color sequences even when regular xterm is in use (as opposed to xterm-16color or xterm-256color). This better supports programs such as byobu that send these sequences under plain xterm
- When switching between normal and alternate screens, the SSH Client would fail to clear the alternate screen. Fixed
- When using xterm and other protocols except bvterm and ANSI, the SSH Client would previously start set to use "application" cursor keys. To start with "standard" cursor keys, the setting Alt. cursor keys had to be enabled, or in stermc the parameter -altCurs had to be used
- The SSH Client will now start by default using "standard" cursor keys. The relevant setting has been replaced with App. cursor keys, and stermc now supports the parameter -appCurs to start instead with "application" cursor keys
- Changed Unicode character widths for about 6% of assigned Unicode code points from 0 to 1, and for another ~8% of code points from 2 to 1. This aligns more closely with character widths used by servers and avoids unintended discrepancies in rendering
- On the Terminal tab, the SSH Client's Default colors dialog now provides both the "Old Windows" and "New Windows" palette options. To match use of colors in other terminals, the New Windows palette is now the default choice. Previously, it was xterm
- The command line terminal client, stermc, now also supports the new palette choices using the -palette parameter
- When using bvterm, the new Windows 10 console produces cursor artifacts when the cursor is moved outside the viewport. The SSH Client now takes steps to avoid this

SSH Server Remote Control Panel:
- When using the CSV export feature in the SSH Server Remote Control Panel for SSH Server versions 8.xx, the CSV export would fail if the data contained a reversibly encrypted password or secret key


Bitvise SSH Client 8.43
Installation:
- The SSH Client adds its installation directory to the system PATH environment variable when installing, but did not remove it when uninstalling. The SSH Client installation directory is now removed from PATH when uninstalling. Reinstallations or upgrades from version 8.43 will briefly remove and then re-add the SSH Client installation directory to PATH.

SSH:
- Certain versions of the Pragma Fortress SSH server - including the most recent version when testing - can send a corrupted SSH authentication banner where an inexact, duplicate copy of the banner message is included before the language tag. SSH Client versions 7.xx and earlier could connect because they ignored the language tag, but SSH Client 8.xx versions would not because they check that the language tag does not exceed an unreasonable length.
- The SSH Client now allows an exception for this server where the incorrect encoding is ignored. If the server cannot be identified as "Pragma FortressSSH", the language tag length check remains enforced.

Command-line clients:
- Previously, an implied command such as the following:
sexec [email protected] dir /?
- ... would incorrectly cause command line clients including sftpc, stermc and sexec to display their own help text instead of invoking the remote command as specified. Fixed.

Graphical client:
- The graphical SSH Client now detects and warns about an insecure installation directory in an expanded, more thorough set of circumstances
- In version 8.42, the -sendExtInfo=... parameter was added to command line clients. An equivalent setting, Send EXT_INFO, is now also available in the graphical client, on the SSH tab

SFTP:
- Fixed an issue with auto-completion which could cause the SFTP graphical interface to dead-lock


Bitvise SSH Client 8.42
Installation:
- The SSH Client no longer supports installation on Windows 10 versions 1507 and 1511. These versions contain a flawed cryptographic implementation which prevents a number of SSH algorithms from working correctly. The lowest Windows 10 version supported is 1607.
- During an initial, interactive installation; when installing into a non-default directory (e.g. outside of C:Program Files (x86)); the SSH Client installer will attempt to detect if any parent of the installation directory grants insecure permissions for non-administrative users. The installer will display a warning about installing into such insecure directories.
- When updating an installation in such a directory, the update will succeed, but the graphical SSH Client will display a warning

Graphical client:
- Some versions of Nvidia Surround modify Windows behavior in a way such that the window manager doesn't respect the SSH Client's fixed window width setting. The graphical SSH Client now works around this issue.
- In the Host key manager interface, a host key could be incorrectly placed into the wrong recognized vs. unrecognized category if there were keys in both categories. Fixed.

Command-line clients:
- The command-line clients sftpc, sexec, stermc, stnlc and spksc now support the command-line parameter -sendExtInfo=n so that the user can disable sending of the client-side SSH_MSG_EXT_INFO message to a server which advertises support, but does not actually support it.
- Command-line clients will no longer display unnecessary warnings about failing to load update settings if the SSH Client was installed in an unattended manner and the graphical SSH Client has not yet been run.

SSH:
- In rare circumstances, an SSH session could terminate in such a way that the SSH Client would crash. Fixed
- The CrushFTP server, and other servers based on the J2SSH Maverick implementation, may advertise support for SSH_MSG_EXT_INFO (RFC 8308), but have a bug where the server disconnects if the client sends this message. Bitvise SSH Client and FlowSsh now attempt to detect these servers based on their SSH version strings, and disable sending of the client-side SSH_MSG_EXT_INFO if detected.
- OpenSSH 6.2 and 6.3 can be configured to enable AES GCM, but crash if it is used. Bitvise software versions 8.42 and higher will now disable AES GCM if the remote version string indicates an affected OpenSSH version.

SFTP:
- The SFTP server which identifies itself as "SSH-2.0-SFTP Server" has a flawed SFTP v4+ text mode implementation. The default transfer mode with this server will now be Binary instead of AutoStd.
The dialog interface for the Mirror feature could require multiple clicks on the OK button. Fixed.

Remote Desktop forwarding:
- The SSH Client now delays deletion of the Remote Desktop profile that mstsc is launched with. This is intended to improve compatibility with Windows on ARM64.

Terminal:
- The SSH Client's graphical terminal window implementation for classical terminals (xterm and other non-bvterm terminals) now implements improved mouse wheel scrolling, properly accumulating mouse wheel deltas.
- Some versions of Cmder have an issue which causes the Windows function ScrollConsoleScreenBuffer to fail unexpectedly. The bvterm client now works around this issue.


Bitvise SSH Client 8.38
- The SSH Client now supports machine-wide automatic update settings which can override user-specific settings. The SSH Client installer also supports command line parameters to configure automatic update settings.
- Changes in Bitvise SSH Server's terminal subsystem in versions 8.xx have made the bvterm protocol unreasonably slow with certain console applications. Bitvise SSH Server and SSH Client versions 8.38 implement optimizations in both the server and client to address these issues.
- sftpc: Pressing Esc on an empty line would incorrectly re-issue the last command. Fixed.
- When public key or private key import fails, a more accurate error message will now be displayed in certain cases


Bitvise SSH Client 8.37
- Fixed: when connecting through a proxy, if the setting Resolve DNS names locally was enabled, the SSH Client would often resolve DNS names remotely (via the proxy) anyway


Bitvise SSH Client 8.36
- Change log not available for this version


Bitvise SSH Client 8.35
- Fixed: with version 8.17, the profile settings RDP > Authentication > Password and Store encrypted password in profile were changed to take effect the same way as similar settings under Login > Authentication, but their UI layout was not updated


Bitvise SSH Client 8.34
- Change log not available for this version


Bitvise SSH Client 8.32
- Fixed an issue in how command line clients (sftpc, sexec, stermc, stnlc, spksc) were initializing the default key exchange algorithm list


Bitvise SSH Client 8.31
- This is not a new feature release, but a successor to 8.29 with continued maintenance updates. We skip versions containing zeros to avoid misunderstandings. For example, 8.03 and 8.30 might both be called "8.3"
- Added error descriptions for Windows error codes related to checking for new versions and downloading updates
- Fixed a memory safety issue which appears to be, but might not be, benign in most circumstances


Bitvise SSH Client 8.29
- Fixed an issue in previous 8.xx versions where, if the SSH Client had not been updated to a new version for longer than 42 days, trying to apply an update would fail due to a Windows registry Access denied error


Bitvise SSH Client 8.26
- Fixed issue introduced in version 8.25 where the recent locations drop-down in the graphical SFTP interface would no longer function correctly
- Fixed issue introduced in version 8.24 where the SSH Server Remote Control Panel could no longer be launched when connected to SSH Server versions 7.xx and earlier


Bitvise SSH Client 8.25

Graphical SFTP:
Auto-completion improvements:
- Regular files are no longer shown for auto completion of directory paths
- Tab and Shift+Tab now behave consistently with auto-completion in other apps
- File transfer events no longer cancel the auto-completion drop-down
- To improve UI responsiveness, directory listings are now performed in a background thread


Bitvise SSH Client 8.23
- Fixed an issue in previous 8.xx versions which would prevent Bitvise SSH Client and FlowSsh from connecting to a server that supports host key synchronization and employs a key type the client does not support. This affected connections from Windows XP and Windows Server 2003, where our cryptographic provider does not support Ed25519; and use under FIPS mode, where Ed25519 and ECDSA/secp256k1 are not supported


Bitvise SSH Client 8.22
- A proportion of users are closing the main SSH Client window when connected so that it minimizes into the Windows notification area (the system tray). Users forget about that SSH Client instance and launch new instances for new sessions. Forgotten sessions stay online indefinitely and terminal window settings do not appear to save because the SSH Client is never closed
- To fix this, the SSH Client will now restore its main window if it's still hidden in the notification area after closing a related window such as terminal or SFTP. This behavior can be configured with a new setting found under Closing and minimization
- Since the changes related to password authentication in 8.17, the graphical client's command line parameter -password=... did not take effect if the SSH Client profile was configured to use password authentication but the checkbox Store encrypted password in profile was disabled. Fixed
- sftpc: Updated help text for get and put commands to clarify how the -r and -o parameters control when hash-based synchronization, heuristic resume or overwrite is used


Bitvise SSH Client 8.21

- The graphical SSH Client's terminal window for xterm (and other non-bvterm terminals) implements a Select mode intended to behave like the Windows console's QuickEdit mode. A difference was catching users off-guard: canceling a mouse text selection with an arbitrary key press would not send the key to the server. For users who began a selection without noticing, it appeared as though the terminal window was eating a key press for no reason. Consistently with the Windows console, the SSH Client will now send key presses that cancel a selection to the server
- In previous versions, if the graphical SSH Client failed to load a profile specified on the command line, it would fall back to the last used profile and still act on the -loginOnStartup parameter if also provided. This would result in bewildering behavior. If a profile specified on the command line fails to load, the SSH Client now loads the default profile (stored in the Windows registry) and ignores -loginOnStartup
- In previous 8.xx versions, loading an SSH Client profile from a network share would fail when the ZoneId alternative data stream could not be opened. If the ZoneId ADS cannot be opened, a profile will now be loaded as if its origin is the local computer
- We have identified niche situations where one-click Remote Desktop forwarding might fail to start when an SSH Client DLL is not found. To resolve this, this version makes changes to how the Remote Desktop client is started
- There exist SSH clients which, in violation of RFC 4254, disconnect if a server sends a global request after successful authentication. A server might send a global request for purposes such as host key synchronization or disconnect detection. If the server supports RFC 8308, then to indicate it supports global requests, the SSH Client will include the extension global-requests-ok in its SSH_MSG_EXT_INFO
- In previous 8.xx versions, the SSH Client would not import RSA private and public keys larger than 8192 bits. This limit is once again 16384 bits
- The SSH Client installer will now offer to wait instead of exiting when another Bitvise installation is already in progress
- Slightly improved the user friendliness of the installer and uninstaller for command-line installations


Bitvise SSH Client 8.19
- In previous 8.xx versions, the icons for the New terminal console, New SFTP window and New Remote Desktop actions were too similar. The SSH Client now sports updated icons that are easier to distinguish
- In previous 8.xx versions, when the SSH Client reconnected after losing a connection, it failed to continue ongoing transfers. Fixed
- SFTP interface: When connecting to SFTP servers that support synchronization using the SFTP v6 extensions check-file-name, check-file-handle and check-file-blocks, the resume and overwrite modes are now more clearly overridden by synchronize in the SFTP user interface
- sftpc: When connecting to SFTP servers that support synchronization, the -r and -o options for get and put commands now both act as aliases for synchronize. Previously, only -o acted as an alias for synchronize, and -r was unavailable


Bitvise SSH Client 8.18
- In previous 8.xx versions, if the system clock was moved back after a check for updates (in UTC, not time zone specific), an automatic check would be repeated with high frequency. This could consume 80 kbps in bandwidth while the graphical SSH Client was running until the clock caught up. Fixed.
- In previous 8.xx versions, an automatic check for updates would be performed if the graphical SSH Client was run with -noRegistry. An automatic check is no longer performed in this situation, but can be performed manually


Bitvise SSH Client 8.17
- In version 8.15, loading a profile which was last saved by a previous version would cause the SSH Client to send an invalid elevation extension value to the server. This caused SSH Server versions 8.xx to disconnect. The SSH Client will now send a valid elevation extension value in this circumstance
- The Remote Desktop forwarding feature Use SSH login credentials would previously work only if the password authentication method was used for client authentication, but it did not work for password authentication over keyboard-interactive. This will now also work with password over keyboard-interactive
- In the graphical SSH Client, on the Login tab, setting Initial method to password could result in unintuitive behavior. Password change was not easily discoverable, and setting Initial method to password without entering a password caused the SSH Client to send an empty password at start of connection, incurring an authentication penalty
- This has been redesigned so that Initial method can be set to password without entering a password. In this case, a password dialog will dependably appear when connecting. As part of this change, it is no longer possible to enter a password on the Login tab without enabling Store encrypted password in profile
- In version 8.15, in command line clients, the -keypairFile parameter did not override a public key configured as an initial authentication method in a profile specified using -profile. The -keypairFile parameter will now once again override any public key configured in the profile


Bitvise SSH Client 8.15

Highlights:
- The SSH Client now supports automatic updates. An administrator can configure the SSH Client to automatically apply all updates; only recommended updates; only strongly recommended updates; to apply updates only manually; or to never check for updates
- Currently, the SSH Client does not install an update service. It needs to be started from time to time by an administrative user in order to apply updates
- The graphical SSH Client and sftpc now support recursive directory mirroring. A directory and all of its subdirectories and files can be synchronized either in the upload or download direction. The SSH Client can synchronize updated files and detect and automatically remove files and directories from the target location that are not present in the source
- The graphical SSH Client and sftpc can now display hashes (cryptographic digests) of local and remote files if the server supports the SFTP v6 check-file extension
- Bitvise SSH Client and SSH Server now implement automatic host key rotation. The SSH Client will synchronize keys from the SSH Server and any other servers that support the OpenSSH mechanism "hostkey update and rotation". The SSH Server will announce to clients all configured host keys, including those not employed, to facilitate host key rotation. The SSH Client will automatically trust new keys announced by a trusted server and remove any keys the server has removed, as long as they were added automatically
- The SSH Client now supports high resolutions and will display crisp text on high-DPI displays such as retina or 4K. The SSH Client now comes with new, higher resolution icons
- SSH Client profiles downloaded from the internet will now be considered unsafe. If a profile is marked by a browser using which it was downloaded as originating from an unsafe zone, the SSH Client will now load safe parts only. When loading a profile interactively in the graphical SSH Client, a prompt will be displayed, allowing the user to mark the profile as safe. If the user confirms, the profile can be fully loaded

Cryptography:
- Bitvise SSH Server, SSH Client and FlowSsh once again support non-standard DSA keys larger than 1024 bits. We do not recommend using these keys, and new keys of this type cannot be generated. Also, these keys cannot be used when FIPS mode cryptography is enabled in Windows. Re-adding support for these keys is intended to resolve an obstacle that may still be preventing some users of 6.xx versions from upgrading
- When using Windows cryptography, Bitvise SSH Server, SSH Client and FlowSsh now implement a backup strategy for DH and ECDH key exchange. Windows implements key exchange, but it does not expose the agreed value in a form suitable for SSH. Bitvise software must retrieve the value by carefully traversing undocumented Windows structures. In versions 7.xx, this required our software to be upgraded to continue working after the Windows 10 1803 update. Our software will now log a warning and fall back to Crypto++ if it cannot perform key exchange because Windows internal structures have changed. However: if FIPS mode is enabled in Windows, this backup strategy is not used, and the software must be updated
- When importing keys, such as from files, the stage at which an import failed is now described in more detail

SSH session:
- Bitvise SSH Server and Client now support the elevation extension. In previous versions, if a Windows account with administrative rights connected to the SSH Server, the server would always elevate the session if possible. Otherwise, the user would not be able to get an elevated session because there was no way to convey the user's preference. With the elevation extension, the user can request a non-administrative security context by requesting no elevation (elevation is still applied by default). In command line clients including stermc, sexec and sftpc, this is controlled using the switch -elevation=n
- Bitvise SSH Server and Client now support the no-flow-control extension. This disables SSH flow control for clients that only support opening one channel. No flow control is now preferred by sftpc, stermc, sexec and spksc, which only need to open one channel in the SSH session. The graphical SSH Client does not support no-flow-control because it requires multiple channels
- Bitvise SSH Server and Client now support the ext-auth-info extension. This allows the server to respond to user authentication failures with more detailed information in situations where this is safe. For example, if the client attempts to perform a password change but the new password does not meet complexity requirements, the server can communicate this instead of making the user guess
- Bitvise SSH Server and Client now support the delay-compression extension. Delayed compression reduces attack surface for unauthenticated clients by delaying availability of compression until after a user is authenticated. The delay-compression extension is an improvement over previously supported alternatives: the [email protected] method contains a by-design race condition, while the approach of invoking a second key exchange doubles the overhead of establishing an SSH session

Terminal:
- Settings for the graphical xterm/vt100 terminal console window (totermw) are now stored in the SSH Client profile instead of in the Windows registry

SFTP:
- In the graphical SFTP interface, the Open and Edit commands will now be much more responsive if a transfer is already in progress. The in-progress transfer will be paused and the file associated with the Open or Edit command will be transferred as a priority
- Both the graphical SFTP interface and sftpc can now work with local paths longer than 259 characters, as well as unsafe paths not permitted by Windows in some contexts (e.g. "C:Com1file")
- A new file transfer mode, TextLf, is now supported. This works the same as AutoLf, but forces newline conversions without relying on file type detection

Tunneling:
- The SSH Client now displays the country (if available) of remote IP addresses. The SSH Client uses the MaxMind GeoLite2 Country database (under license). The country database comes with the SSH Client installation and is not automatically updated, other than by updating the SSH Client itself.

Command line clients:
- It is now easier to connect to SSH servers that accept connections on non-default ports. If no port is specified on the command line, but the SSH Client knows a host key for the destination server, the SSH Client will automatically connect to the port associated with the server in the host key database. If there are multiple port associations, however, the port still needs to be specified, unless one of them is 22.
- It is now easier to enable and disable individual algorithms with our command-line clients. Previously, to use non-default algorithms, either a -profile needed to be used, or a complete algorithm list had to be supplied using -hkey, -kex, -encr or -mac. It is now still possible to pass a whole list using the same parameters, or using their new aliases -hkeyAlgs, -kexAlgs, -encrAlgs or -macAlgs. In addition, it is possible to modify the default algorithm lists using -hkeyMod, -kexMod, -encrMod or -macMod. When using the "Mod" versions, provide a comma-separated list of algorithm names with optional prefixes. Names prefixed with "+" are added to the front of the list; names without a prefix are appended to the end; and names prefixed with "!" are removed. Example: -encrMod=+aes256-gcm,!3des-ctr

Utilities:
- The log utility now supports filesystem paths in Unicode


Bitvise SSH Client 7.46
- After the SSH session has been terminated by receiving EOF or sending SSH_MSG_DISCONNECT, FlowSsh will now discard any further outgoing SSH packets. This helps avoid a stall in processing and further improves the odds that all previously received data will be processed.
- File transfer: Fixed an issue where, if the connection was lost during a download while synchronization was being performed, the local file size would be reset to zero.
- stermc: Improved handling of default colors configured in -profile or using the -colors parameter when using non-bvterm terminals such as xterm or vt100. The screen is now cleared using the configured colors.


Bitvise SSH Client 7.45
- Bitvise SSH Server, SSH Client, and FlowSsh previously did not implement strict size limits or sanitization of content before displaying or logging strings received from a remote party. Much stricter size limits and sanitization are now implemented
- Bitvise SSH Server, SSH Client, and FlowSsh now report the size of the Diffie Hellman group actually used in DH key exchange. This is useful with key exchange methods that use DH group exchange, where there was previously no straightforward way to know what size group was used
- Importing an empty public key file would cause the SSH Client's Host key manager to hang indefinitely. Fixed.
- When loading an SSH Client profile, the SSH Client's Remote Desktop tab failed to update the Remote Desktop width and/or height if the new value was 0 (the default value). Fixed.


Bitvise SSH Client 7.44
- Cryptography: Implemented support for changes in Windows internal cryptographic structures in Windows Insider Preview Build 17704. This build was released to Windows Insiders in the Fast ring on June 27, 2018
- Users who need to use earlier versions of our software on new Windows builds that change internal structures can work around compatibility issues by using the following key exchange algorithms: Curve25519, ECDH over nistp256k1. These key exchange methods do not rely on Windows cryptography; however, our software does not provide them if FIPS mode is enabled in Windows. Other key exchange methods require upgrading our software to a version that supports the new Windows build


Bitvise SSH Client 7.43
File transfer:
- Fixed issues in past Bitvise software versions that resulted in incorrect file times when using subsecond times with SFTP protocol versions 4 and 6. This would result in incorrect last modified times after a file transfer which affected, on average, about one in several hundred files. Affected files would receive a last modified timestamp incorrect by up to 7+ minutes

Authentication:
- Fixed issues in password change dialog behavior if the original password was modified

Installation:
- Updated installer and uninstaller manifests to reduce the likelihood that Windows will incorrectly run the Program Compatibility Assistant during or after installation. This mainly affects older Windows versions such as Windows 7


Bitvise SSH Client 7.42
- The End User License Agreement has been updated to try to bring it closer to the requirements of states and their contractors. Terms are otherwise unchanged. Situations in which licenses can be transferred are now laid out so that no permission will be needed in most cases
- The SSH Client now includes a new build of the SSH Server Remote Control Panel (WRC) for use with SSH Server versions 7.21 and above. The new build incorporates improvements to the SSH Server Control Panel since version 7.26
- The SSH Client continues to include older versions of the Remote Control Panel for use with older SSH Server versions. Those remain unchanged
- The graphical SSH Client will no longer mark a profile as changed when a password is changed, but the password is not configured to be saved in the profile


Bitvise SSH Client 7.41
- This is not a new feature release, but a successor to 7.39 with continued maintenance updates. (We skip over versions containing zeros to avoid ambiguities. For example, 7.04 and 7.40 might both be referred to as "7.4")
- This version continues an upgrade amnesty. Any Bitvise SSH Client activation code that could activate a previous 7.xx version will also activate this version

SSH:
- Fixed an issue in zlib compression provided by the Crypto++ library. There existed a race condition which could cause data to be decompressed incorrectly in specific circumstances. (The circumstances required for this to happen do not appear to exist in the graphical Bitvise SSH Client or its command line clients)
- Fixed a denial of service attack vector. This remains to be described in more detail

File transfer:
- When performing unattended file transfers, the command line client sftpc would previously send a fire-and-forget SSH_FXP_CLOSE message followed by immediately closing the SFTP channel and the SSH session. Depending on circumstances such as network latency, Bitvise SSH Server versions up to and including 7.39 could fail to process the SSH_FXP_CLOSE request and incorrectly log that the final transfer may not have completed as intended. This has been fixed in the SSH Server with version 7.41. But also, sftpc will no longer send a fire-and-forget SSH_FXP_CLOSE before exiting
- In the SFTP interface of the graphical SSH Client, in the Move to... dialog, removed a limit that incorrectly prevented entering more than a fixed number of characters. This prevented use of the Move to feature with long paths and file names


Bitvise SSH Client 7.39
- SFTP: In past 7.xx versions, Bitvise SSH Client and FlowSsh would perform a Resume check regardless of the type of server if Overwrite was enabled for upload. We suspect this could cause creation of an empty file with the same name on servers that support creation of multiple files with the same name.
- The Resume check will no longer be performed when connected to a server that does not support SFTP v6 check-file and check-file-blocks extensions. With a server that supports these extensions, the Resume check will continue to be performed for Overwrite, since in this case Resume and Overwrite are the same operation.


Bitvise SSH Client 7.36

Development, licensing, and US export control:
- This is the first version of Bitvise SSH Server, SSH Client, and FlowSsh published from the United States.
- All assets, operations, relationships, and agreements related to Bitvise software development and licensing; including license agreements for use of Bitvise software by users; have been transferred from Bitvise Limited incorporated in Gibraltar, to Bitvise Limited now incorporated in Texas.
- Final builds are now performed in Texas. Our software development continues in Slovenia, Germany, and Hungary, and may include developers elsewhere in the future.
- This move is an administrative change. Our development, ownership, pricing, support, terms and policies and relationship to customers generally remain the same.
- For the purpose of export from the United States, our SSH Server, SSH Client and FlowSsh are self-classified as Mass-Market products using the ECCN 5D992, with the encryption authorization type identifier MMKT. These denote eligibility under License Exception ENC § 740.17(b)(1) of the Export Administration Regulations (EAR).
- Bitvise SSH Server, SSH Client, and FlowSsh now come with new license agreements. Users must review the new EULAs, even though the terms remain substantially the same. We apologize for this inconvenience, and have attempted to draft the agreements in a way that this might not be necessary very often.

SSH:
- Windows 10 version 1709, OS build 17046.1000, changed internal Windows structures in a way that prevented Bitvise SSH Server, SSH Client, and FlowSsh from obtaining the agreed value in DH or ECDH key exchange. This prevented successful SSH connections using this new Windows build. Fixed.
- There exist SSH implementations based on WeOnlyDo, e.g. freeSSHd, which might not send failure description and language tag fields when sending an SSH_MSG_CHANNEL_OPEN_FAILURE message. Bitvise SSH Server, SSH Client and FlowSsh will now behave as though these fields were sent as empty strings, instead of disconnecting due to an unexpected packet format.

sexec:
- Now supports the command line parameter -git, which is shorthand for the new parameters -cmdQuoted and -exitZero. This allows sexec to be more easily configured for use with Git.
- Now supports the command line parameter -cmdQuoted. This can be used when the remote command to execute is provided outside of the -cmd=... parameter, but is enclosed in single or double quotes.
- Now supports the command line parameter -exitZero. If the remote command executes and returns exit code 0, this will cause sexec to return exit code 0 as well.
- Now supports the command line parameter -p . This can be used to specify the port number instead of -port=.
- Fixed an issue which would cause sexec to interpret as its own parameter a port number passed as part of the remote command to be executed. This could cause sexec to fail, or to connect to the SSH server on an unintended port.


Bitvise SSH Client 7.35

SFTP GUI:
- Fixed an issue which would cause a crash when all files are removed from the download or upload queue.
- Fixed visual artifacts that would arise while resizing in the SFTP Download or Upload window.

SFTP compatibility:
- We have identified two compatibility issues in current and past versions of mod_sftp for ProFTPD:
- When using SFTP versions 4-6, when a client requests attributes not supported by mod_sftp, the server returns an incorrectly encoded response. With past Bitvise SSH Client and FlowSsh versions, this would result in a disconnect.
- When using SFTP version 6, mod_sftp indicates support for the check-file extensions, but disconnects if the client requests the server to hash a larger file block by block. This prevents Bitvise SSH Client and FlowSsh from performing hash-based synchronization of file content, which would normally be used instead of Resume or Overwrite if check-file extensions can be used.
- We expect these issues to be resolved in future mod_sftp versions. However, mod_sftp now comes configured by default to not send its version in the SSH version string. A client therefore cannot distinguish between a newer version that will contain these fixes, and an older version which does not.
- At this time, Bitvise SSH Client and FlowSsh will avoid the known compatibility issues by restricting SFTP protocol version to 3 when mod_sftp is detected. We would like to lift this restriction in the future if there arises a way to detect the mod_sftp version early enough.

We have identifed a compatibility issue with Van Dyke VShell:
- When using SFTP version 6, the VShell server indicates support for the check-file extensions, but does not support block-by-block hashing. This prevents Bitvise SSH Client and FlowSsh from performing hash-based synchronization of file content, which would normally be used instead of Resume or Overwrite if check-file extensions can be used.
- At this time, hash-based synchronization will be avoided when connecting to VShell, and Resume and Overwrite will be used instead.
- If VShell chooses to implement support for block-by-block hashing, Bitvise SSH Client and FlowSsh will once more use this functionality if the server advertises the extension name check-file-blocks in its supported2 packet.
- Bitvise SSH Client and FlowSsh will now recognize the check-file extension indicator in the supported2 packet as required by the SFTP extensions draft, in addition to check-file-name and check-file-handle.
- Bitvise SSH Client and FlowSsh will now recognize a check-file-blocks extension sent by servers. We suggest that future SFTP server implementations advertise support for check-file-blocks if all of the following are true:
- The server supports block-by-block file hashing
- Any reasonable block size requested by the client is supported
- A file can be hashed block-by-block starting from an arbitrary offset
- Fixed an issue which would cause available public keys to be displayed incorrectly on the Login tab, under Authentication, after a profile was closed
- Fixed issues involving the launch shortcut icons on the left side of the main SSH Client window. One issue would cause the SSH Client to crash if an icon was dragged out of the shortcut bar in the up direction