level shifter open drain
The PI4ULS5V106 supports up to 100MHz up translation and greater than 100MHz down translation at ≤ 30pF cap load and up to 40MHz up/down translation ... , how to use open-drain logic devices to translate digital signals between different voltage nodes.
| 相關軟體 Shift 資訊 | |
|---|---|
 level shifter open drain 相關參考資料
1v8 to 5v Level Shifting Diaries - Part 1 - Open Drain ICs ...
Introduction. This blog was initially planned as a overview of the TXB0108 Level-Shifter, but that changed as soon as i received the TXS0108 ... https://www.96boards.org Bi-Directional Level Shifter for Open-Drain and Push-Pull ...
The PI4ULS5V106 supports up to 100MHz up translation and greater than 100MHz down translation at ≤ 30pF cap load and up to 40MHz up/down translation ... https://www.diodes.com Level-shift Using Open-Drain Outputs | TI.com Video
how to use open-drain logic devices to translate digital signals between different voltage nodes. https://training.ti.com MAX14591 High-Speed, Open-Drain Capable Logic-Level ...
A logic signal present on the VL side of the device appears as the same logic signal on the VCC side of the device, and vice-versa. The device is optimized for the I²C bus as well as the management da... https://www.maximintegrated.co TXS0101 1-Bit Bidirectional Level-Shifting, Voltage-Level ...
TXS0101 1-Bit Bidirectional Level-Shifting, Voltage-Level Translator With Auto-Direction-. Sensing for Open-Drain and Push-Pull Applications. 1. 1 Features. http://www.ti.com TXS0101 1-Bit Bidirectional Voltage-Level Shifter for Open ...
TXS0101 1-Bit Bidirectional Level-Shifting, Voltage-Level Translator With Auto-Direction-Sensing for Open-Drain and Push-Pull Applications datasheet (Rev. http://www.ti.com TXS0102 2-Bit Bidirectional Voltage-Level Shifter for Open ...
This two-bit non-inverting translator is a bidirectional voltage-level translator ... 2-Bit Bidirectional Voltage-Level Shifter for Open-Drain and Push-Pull Application. http://www.ti.com TXS0104E 4-Bit Bidirectional Voltage-Level Shifter for Open ...
This 4-bit non-inverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.65 V to 3.6 V. VCCA must be less tha... http://www.ti.com Voltage translation - NXP Semiconductors
Devices with open-drain outputs In devices equipped with an open-drain output, the output can be pulled up to a voltage level matching the input requirements of the device it is driving. A pull-up res... https://www.nxp.com Voltage-Level Translation Guide (Rev. H) - Texas Instruments
a voltage-level translator device from .... Bidirectional Multi-Voltage Translator ... transmission speeds greater than 100 Mbps for open-drain systems utilizing a ... http://www.ti.com |