Trojan Remover 歷史舊版本 Page1

更新時間：2023-09-23
更新細節：

What's new in this version:

Trojan Remover 6.9.5 Build 2983
- Help Update 10.3.3
- New: added information on new alert screens


Trojan Remover 6.9.5 Build 2981
- Updater 2.0.1.1151
- FIX: The option to relaunch the Main Program after an update was mistakenly removed, this has been put back in place


Trojan Remover 6.9.5 Build 2980
- BootExecute checks modified to handle Unicode entries
- Main Program no longer requires Administrator rights when run by a non-Admin User - this ensures that settings, exclusions etc. are correctly set at a per-user level.
- If an invalid Username/Key combination was entered when registering or renewing, an "Unknown Error" message would be displayed. This was a mistake, the correct specific reasons for failure are now shown again.
- Updater now uses https connections when available
- All Update Servers added back into the XP version so it no longer only uses just the one server


Trojan Remover 6.9.5 Build 2979
- New: added heuristic detection for malware loaded by Scheduled Tasks
- Mod: FastScan settings for standard User accounts now inherit settings configured when the main Trojan Remover program is run. A future update should allow standard User accounts to configure their own scan settings.


Trojan Remover 6.9.5 Build 2977
- fix: removed false detection on new Firefox Scheduled Updates Task


Trojan Remover 6.9.5 Build 2976
- Main Program 6.9.5.2976, Updater 2.0.0.1147
- New: added routines to handle Windows 10 Exploit Mitigation and Controlled Folder Access settings


Trojan Remover 6.9.5 Build 2975
- New: added new heuristic tests for specific malware registry entries
- Update: Helpfile updated
- Update: Uninstaller updated


Trojan Remover 6.9.5 Build 2974
- New: the main program Help | About Trojan Remover | Version Info screen now shows whether any program component updates are available
- Fix: removed intermittent false positive rootkitted file alert on an Open Hardware Monitor driver
- Fix: under certain circumstances the Trojan Remover logfile was not being correctly written after a scan had been completed
- Fix: if malware entries were identified in the HOSTS file Trojan Remover would fail to repair the file due to changes made in an earlier build. This has now been fixed


Trojan Remover 6.9.5 Build 2973
- New: Updated Windows 10 version checks


Trojan Remover 6.9.5 Build 2972
- New: Updated Windows 10 version checks for May 2020 Update

- Fix: an error in build 2971 meant that "Prompt for Action" when scanning folders was not showing the alert form so the User could not determine the action to take


Trojan Remover 6.9.5 Build 2971
New:
- Scan progress is now shown visually in the taskbar icon
- visual scan progress now shown when using the drive/folder scan

Fix:
- stopped the drive/folder scan from creating and then deleting numerous temporary shortcut files whilst extracting file icons for the folder display


Trojan Remover 6.9.5 Build 2970
Fix:
- upated the fix to exclusion routines
- the buttons on certain dialogs would not work if running on XP, following the update to 6.9.5.2969


Trojan Remover 6.9.5 Build 2969
Fix:
- corrected errors raised when trying to exclude files from scanning, if no previous exclusions existed
- SAFE MODE default registry key restoral was not working correctly

New:
- improved detection for Powershell file-less exploits


Trojan Remover 6.9.5 Build 2967
- Main Program 6.9.5.2967, FastScan 6.9.5.1365, Updater 1.1.40
- New: added alerting for Proxy Server if intercepting internet traffic on the local Loopback port (127.0.0.1). A Proxy Server active on any other port will not be alerted on, but details of the proxy will be added to the logfile
- New: added Component Version information to the About Trojan Remover screen


Trojan Remover 6.9.5 Build 2966
- New: added Utility to remove an Internet Proxy Server if one is established


Trojan Remover 6.9.5 Build 2965
- Main Program 6.9.5.2965, FastScan 6.9.5.1364, Updater 1.4.5.1136
- Fix: a Windows Update on Aug 13 2019 meant Trojan Remover was not correctly verifying certain Windows dlls resulting in a false positive alert
- Fix: Build 1135 of the Updater was inadvertently writing to a debug logfile as well as the normal logfile


Trojan Remover 6.9.5 Build 2963
- Main Program 6.9.5.2963. Improved scan and repair of HOSTS files
- Fixed a registration key issue where the FastScan was not being re-registered when a renewal key was entered
- Updater 1.4.5.1134. Added better handling of update file extraction when Windows Defender is scanning the files after they are downloaded


Trojan Remover 6.9.5 Build 2962
- New: Main Program 6.9.5.2962, FastScan 6.9.5.1362, Updater 1.4.5.1132
- New: Updater (when run manually) now only requests Administrator privileges if absolutely needed, most operations should not need to make such a request
- New: TRElevationHelper component, used by the Updater if Administrator privileges are needed
- New: 64bit Shell Extension to provide the Windows Explorer context menu entry
- Mod: updated heuristic scans
- Mod: added new icon for Windows Explorer context menu entry
- Fix: Windows 10 version 1803 Pro and above incorrectly logged as Enterprise


Trojan Remover 6.9.5 Build 2961
- Change log not available for this version


Trojan Remover 6.9.5 Build 2960
- New: added options for the Logon and Daily FastScans to Run Silent, i.e invisible, but if an alert or dialog needs to be shown then the FastScan will automatically become visible. Running Silent becomes the default for new installations
- Update: changes to the licence key entry screen to provide better indication of possible typing errors when entering the key
- Fix: when running silent the Updater would detect minor program component updates were available but would not install them automatically, nor show itself to allow a manual update to be completed


Trojan Remover 6.9.5 Build 2959
- Fix: Scheduled Tasks running signed Microsoft programs were not being correctly scanned for ancillary malware possibilities.


Trojan Remover 6.9.5 Build 2958
- Main Program updated to 6.9.5.2958, FastScan to 6.9.5.1358
- New: added scanning routine to check for browsers launched via Scheduled Tasks to open either malicious, or adware-dependent, web pages
- Fix: the update to version 6.9.5.2957 broke updates on Windows Vista due to the way that system checks digital signatures. This update resolves the issue, but users on Windows Vista will need to download and install a new copy of the program from the Downloads page (no need to uninstall the current version first)


Trojan Remover 6.9.5 Build 2957
- Main Program updated to 6.9.5.2957, FastScan to 6.9.5.1357
- New: added detection for malware launched via Command Processor AutoRun entries
- New: added scanning of programs launched via the Program Compatibility Assistant


Trojan Remover 6.9.5 Build 2956
- Main Program updated to 6.9.5.2956, FastScan to 6.9.5.1356
- New: added detection for malware using Explorer.exe to automatically launch web pages
- Fix: if a Scheduled Task was detected loading malware, the Scheduled Task was not being correctly deleted (although the loading malware would still have been disabled correctly)
- Helpfile updates


Trojan Remover 6.9.5 Build 2955
- Main Program updated to 6.9.5.2955, FastScan to 6.9.5.1355
- New: added scanning for rogue Firefox browser extensions
- New: added routine to check for Python scripts loaded at boot-time
- New: added settings to create and modify daily updates scheduling


Trojan Remover 6.9.5 Build 2954
- Main Program updated to 6.9.5.2954, FastScan to 6.9.5.1354
- New: added scanning of applications loaded as services using proxy service loaders
- New: added routine to schedule daily FastScans, to complement the FastScan that runs when the system starts, or a new user logs on
- Mod: re-categorised the Settings menu (previously the "Options" menu) to make sub-groups for Scan, FastScan and Update settings


Trojan Remover 6.9.5 Build 2953
- Main Program updated to 6.9.5.2953, FastScan to 6.9.5.1353
- Improved scanning of Scheduled Tasks launched from Task sub-folders
- Improved parsing of Script commands
- Bug fix: attempting to exclude a registry entry from future scanning would fail if an exclusions file did not already exist


Trojan Remover 6.9.5 Build 2952
- The installer now downloads the databases separately to ensure the latest are always installed (an offline installler is provided for use on systems not connected to the Internet)
- Bug fix: a conflict with Nortons Internet Security has been identifed and resolved
- Bug fix: a heuristic scan module was raising a false alert when run on an XP system, if the scan was "Run As" a different user to the logged on user


Trojan Remover 6.9.5 Build 2950
- Added detection and fixing of hijacked browser and program shortcuts in order to deal with redirects created by the likes of launchpage.org, amisites.com, and others
- Modified file exclusion routines so they are only applied to the local machine, not to any roaming profile


Trojan Remover 6.9.5 Build 2949
- Main Program updated to 6.9.5.2949, FastScan to 6.9.5.1350
- Added new heuristics to detect file-less malware spawned using Powershell


Trojan Remover 6.9.5 Build 2948
- Main Program updated to 6.9.5.2948, FastScan to 6.9.5.1349, Updater to 1.4.1.1118
- Improved scan speed times
- Minor fixes

更新時間：2022-08-05
更新細節：

What's new in this version:

Trojan Remover 6.9.5 Build 2981
- Updater 2.0.1.1151
- FIX: The option to relaunch the Main Program after an update was mistakenly removed, this has been put back in place


Trojan Remover 6.9.5 Build 2980
- BootExecute checks modified to handle Unicode entries
- Main Program no longer requires Administrator rights when run by a non-Admin User - this ensures that settings, exclusions etc. are correctly set at a per-user level.
- If an invalid Username/Key combination was entered when registering or renewing, an "Unknown Error" message would be displayed. This was a mistake, the correct specific reasons for failure are now shown again.
- Updater now uses https connections when available
- All Update Servers added back into the XP version so it no longer only uses just the one server


Trojan Remover 6.9.5 Build 2979
- New: added heuristic detection for malware loaded by Scheduled Tasks
- Mod: FastScan settings for standard User accounts now inherit settings configured when the main Trojan Remover program is run. A future update should allow standard User accounts to configure their own scan settings.


Trojan Remover 6.9.5 Build 2977
- fix: removed false detection on new Firefox Scheduled Updates Task


Trojan Remover 6.9.5 Build 2976
- Main Program 6.9.5.2976, Updater 2.0.0.1147
- New: added routines to handle Windows 10 Exploit Mitigation and Controlled Folder Access settings


Trojan Remover 6.9.5 Build 2975
- New: added new heuristic tests for specific malware registry entries
- Update: Helpfile updated
- Update: Uninstaller updated


Trojan Remover 6.9.5 Build 2974
- New: the main program Help | About Trojan Remover | Version Info screen now shows whether any program component updates are available
- Fix: removed intermittent false positive rootkitted file alert on an Open Hardware Monitor driver
- Fix: under certain circumstances the Trojan Remover logfile was not being correctly written after a scan had been completed
- Fix: if malware entries were identified in the HOSTS file Trojan Remover would fail to repair the file due to changes made in an earlier build. This has now been fixed


Trojan Remover 6.9.5 Build 2973
- New: Updated Windows 10 version checks


Trojan Remover 6.9.5 Build 2972
- New: Updated Windows 10 version checks for May 2020 Update

- Fix: an error in build 2971 meant that "Prompt for Action" when scanning folders was not showing the alert form so the User could not determine the action to take


Trojan Remover 6.9.5 Build 2971
New:
- Scan progress is now shown visually in the taskbar icon
- visual scan progress now shown when using the drive/folder scan

Fix:
- stopped the drive/folder scan from creating and then deleting numerous temporary shortcut files whilst extracting file icons for the folder display


Trojan Remover 6.9.5 Build 2970
Fix:
- upated the fix to exclusion routines
- the buttons on certain dialogs would not work if running on XP, following the update to 6.9.5.2969


Trojan Remover 6.9.5 Build 2969
Fix:
- corrected errors raised when trying to exclude files from scanning, if no previous exclusions existed
- SAFE MODE default registry key restoral was not working correctly

New:
- improved detection for Powershell file-less exploits


Trojan Remover 6.9.5 Build 2967
- Main Program 6.9.5.2967, FastScan 6.9.5.1365, Updater 1.1.40
- New: added alerting for Proxy Server if intercepting internet traffic on the local Loopback port (127.0.0.1). A Proxy Server active on any other port will not be alerted on, but details of the proxy will be added to the logfile
- New: added Component Version information to the About Trojan Remover screen


Trojan Remover 6.9.5 Build 2966
- New: added Utility to remove an Internet Proxy Server if one is established


Trojan Remover 6.9.5 Build 2965
- Main Program 6.9.5.2965, FastScan 6.9.5.1364, Updater 1.4.5.1136
- Fix: a Windows Update on Aug 13 2019 meant Trojan Remover was not correctly verifying certain Windows dlls resulting in a false positive alert
- Fix: Build 1135 of the Updater was inadvertently writing to a debug logfile as well as the normal logfile


Trojan Remover 6.9.5 Build 2963
- Main Program 6.9.5.2963. Improved scan and repair of HOSTS files
- Fixed a registration key issue where the FastScan was not being re-registered when a renewal key was entered
- Updater 1.4.5.1134. Added better handling of update file extraction when Windows Defender is scanning the files after they are downloaded


Trojan Remover 6.9.5 Build 2962
- New: Main Program 6.9.5.2962, FastScan 6.9.5.1362, Updater 1.4.5.1132
- New: Updater (when run manually) now only requests Administrator privileges if absolutely needed, most operations should not need to make such a request
- New: TRElevationHelper component, used by the Updater if Administrator privileges are needed
- New: 64bit Shell Extension to provide the Windows Explorer context menu entry
- Mod: updated heuristic scans
- Mod: added new icon for Windows Explorer context menu entry
- Fix: Windows 10 version 1803 Pro and above incorrectly logged as Enterprise


Trojan Remover 6.9.5 Build 2961
- Change log not available for this version


Trojan Remover 6.9.5 Build 2960
- New: added options for the Logon and Daily FastScans to Run Silent, i.e invisible, but if an alert or dialog needs to be shown then the FastScan will automatically become visible. Running Silent becomes the default for new installations
- Update: changes to the licence key entry screen to provide better indication of possible typing errors when entering the key
- Fix: when running silent the Updater would detect minor program component updates were available but would not install them automatically, nor show itself to allow a manual update to be completed


Trojan Remover 6.9.5 Build 2959
- Fix: Scheduled Tasks running signed Microsoft programs were not being correctly scanned for ancillary malware possibilities.


Trojan Remover 6.9.5 Build 2958
- Main Program updated to 6.9.5.2958, FastScan to 6.9.5.1358
- New: added scanning routine to check for browsers launched via Scheduled Tasks to open either malicious, or adware-dependent, web pages
- Fix: the update to version 6.9.5.2957 broke updates on Windows Vista due to the way that system checks digital signatures. This update resolves the issue, but users on Windows Vista will need to download and install a new copy of the program from the Downloads page (no need to uninstall the current version first)


Trojan Remover 6.9.5 Build 2957
- Main Program updated to 6.9.5.2957, FastScan to 6.9.5.1357
- New: added detection for malware launched via Command Processor AutoRun entries
- New: added scanning of programs launched via the Program Compatibility Assistant


Trojan Remover 6.9.5 Build 2956
- Main Program updated to 6.9.5.2956, FastScan to 6.9.5.1356
- New: added detection for malware using Explorer.exe to automatically launch web pages
- Fix: if a Scheduled Task was detected loading malware, the Scheduled Task was not being correctly deleted (although the loading malware would still have been disabled correctly)
- Helpfile updates


Trojan Remover 6.9.5 Build 2955
- Main Program updated to 6.9.5.2955, FastScan to 6.9.5.1355
- New: added scanning for rogue Firefox browser extensions
- New: added routine to check for Python scripts loaded at boot-time
- New: added settings to create and modify daily updates scheduling


Trojan Remover 6.9.5 Build 2954
- Main Program updated to 6.9.5.2954, FastScan to 6.9.5.1354
- New: added scanning of applications loaded as services using proxy service loaders
- New: added routine to schedule daily FastScans, to complement the FastScan that runs when the system starts, or a new user logs on
- Mod: re-categorised the Settings menu (previously the "Options" menu) to make sub-groups for Scan, FastScan and Update settings


Trojan Remover 6.9.5 Build 2953
- Main Program updated to 6.9.5.2953, FastScan to 6.9.5.1353
- Improved scanning of Scheduled Tasks launched from Task sub-folders
- Improved parsing of Script commands
- Bug fix: attempting to exclude a registry entry from future scanning would fail if an exclusions file did not already exist


Trojan Remover 6.9.5 Build 2952
- The installer now downloads the databases separately to ensure the latest are always installed (an offline installler is provided for use on systems not connected to the Internet)
- Bug fix: a conflict with Nortons Internet Security has been identifed and resolved
- Bug fix: a heuristic scan module was raising a false alert when run on an XP system, if the scan was "Run As" a different user to the logged on user


Trojan Remover 6.9.5 Build 2950
- Added detection and fixing of hijacked browser and program shortcuts in order to deal with redirects created by the likes of launchpage.org, amisites.com, and others
- Modified file exclusion routines so they are only applied to the local machine, not to any roaming profile


Trojan Remover 6.9.5 Build 2949
- Main Program updated to 6.9.5.2949, FastScan to 6.9.5.1350
- Added new heuristics to detect file-less malware spawned using Powershell


Trojan Remover 6.9.5 Build 2948
- Main Program updated to 6.9.5.2948, FastScan to 6.9.5.1349, Updater to 1.4.1.1118
- Improved scan speed times
- Minor fixes

更新時間：2022-07-18
更新細節：

What's new in this version:

Trojan Remover 6.9.5 Build 2980
- BootExecute checks modified to handle Unicode entries
- Main Program no longer requires Administrator rights when run by a non-Admin User - this ensures that settings, exclusions etc. are correctly set at a per-user level.
- If an invalid Username/Key combination was entered when registering or renewing, an "Unknown Error" message would be displayed. This was a mistake, the correct specific reasons for failure are now shown again.
- Updater now uses https connections when available
- All Update Servers added back into the XP version so it no longer only uses just the one server


Trojan Remover 6.9.5 Build 2979
- New: added heuristic detection for malware loaded by Scheduled Tasks
- Mod: FastScan settings for standard User accounts now inherit settings configured when the main Trojan Remover program is run. A future update should allow standard User accounts to configure their own scan settings.


Trojan Remover 6.9.5 Build 2977
- fix: removed false detection on new Firefox Scheduled Updates Task


Trojan Remover 6.9.5 Build 2976
- Main Program 6.9.5.2976, Updater 2.0.0.1147
- New: added routines to handle Windows 10 Exploit Mitigation and Controlled Folder Access settings


Trojan Remover 6.9.5 Build 2975
- New: added new heuristic tests for specific malware registry entries
- Update: Helpfile updated
- Update: Uninstaller updated


Trojan Remover 6.9.5 Build 2974
- New: the main program Help | About Trojan Remover | Version Info screen now shows whether any program component updates are available
- Fix: removed intermittent false positive rootkitted file alert on an Open Hardware Monitor driver
- Fix: under certain circumstances the Trojan Remover logfile was not being correctly written after a scan had been completed
- Fix: if malware entries were identified in the HOSTS file Trojan Remover would fail to repair the file due to changes made in an earlier build. This has now been fixed


Trojan Remover 6.9.5 Build 2973
- New: Updated Windows 10 version checks


Trojan Remover 6.9.5 Build 2972
- New: Updated Windows 10 version checks for May 2020 Update

- Fix: an error in build 2971 meant that "Prompt for Action" when scanning folders was not showing the alert form so the User could not determine the action to take


Trojan Remover 6.9.5 Build 2971
New:
- Scan progress is now shown visually in the taskbar icon
- visual scan progress now shown when using the drive/folder scan

Fix:
- stopped the drive/folder scan from creating and then deleting numerous temporary shortcut files whilst extracting file icons for the folder display


Trojan Remover 6.9.5 Build 2970
Fix:
- upated the fix to exclusion routines
- the buttons on certain dialogs would not work if running on XP, following the update to 6.9.5.2969


Trojan Remover 6.9.5 Build 2969
Fix:
- corrected errors raised when trying to exclude files from scanning, if no previous exclusions existed
- SAFE MODE default registry key restoral was not working correctly

New:
- improved detection for Powershell file-less exploits


Trojan Remover 6.9.5 Build 2967
- Main Program 6.9.5.2967, FastScan 6.9.5.1365, Updater 1.1.40
- New: added alerting for Proxy Server if intercepting internet traffic on the local Loopback port (127.0.0.1). A Proxy Server active on any other port will not be alerted on, but details of the proxy will be added to the logfile
- New: added Component Version information to the About Trojan Remover screen


Trojan Remover 6.9.5 Build 2966
- New: added Utility to remove an Internet Proxy Server if one is established


Trojan Remover 6.9.5 Build 2965
- Main Program 6.9.5.2965, FastScan 6.9.5.1364, Updater 1.4.5.1136
- Fix: a Windows Update on Aug 13 2019 meant Trojan Remover was not correctly verifying certain Windows dlls resulting in a false positive alert
- Fix: Build 1135 of the Updater was inadvertently writing to a debug logfile as well as the normal logfile


Trojan Remover 6.9.5 Build 2963
- Main Program 6.9.5.2963. Improved scan and repair of HOSTS files
- Fixed a registration key issue where the FastScan was not being re-registered when a renewal key was entered
- Updater 1.4.5.1134. Added better handling of update file extraction when Windows Defender is scanning the files after they are downloaded


Trojan Remover 6.9.5 Build 2962
- New: Main Program 6.9.5.2962, FastScan 6.9.5.1362, Updater 1.4.5.1132
- New: Updater (when run manually) now only requests Administrator privileges if absolutely needed, most operations should not need to make such a request
- New: TRElevationHelper component, used by the Updater if Administrator privileges are needed
- New: 64bit Shell Extension to provide the Windows Explorer context menu entry
- Mod: updated heuristic scans
- Mod: added new icon for Windows Explorer context menu entry
- Fix: Windows 10 version 1803 Pro and above incorrectly logged as Enterprise


Trojan Remover 6.9.5 Build 2961
- Change log not available for this version


Trojan Remover 6.9.5 Build 2960
- New: added options for the Logon and Daily FastScans to Run Silent, i.e invisible, but if an alert or dialog needs to be shown then the FastScan will automatically become visible. Running Silent becomes the default for new installations
- Update: changes to the licence key entry screen to provide better indication of possible typing errors when entering the key
- Fix: when running silent the Updater would detect minor program component updates were available but would not install them automatically, nor show itself to allow a manual update to be completed


Trojan Remover 6.9.5 Build 2959
- Fix: Scheduled Tasks running signed Microsoft programs were not being correctly scanned for ancillary malware possibilities.


Trojan Remover 6.9.5 Build 2958
- Main Program updated to 6.9.5.2958, FastScan to 6.9.5.1358
- New: added scanning routine to check for browsers launched via Scheduled Tasks to open either malicious, or adware-dependent, web pages
- Fix: the update to version 6.9.5.2957 broke updates on Windows Vista due to the way that system checks digital signatures. This update resolves the issue, but users on Windows Vista will need to download and install a new copy of the program from the Downloads page (no need to uninstall the current version first)


Trojan Remover 6.9.5 Build 2957
- Main Program updated to 6.9.5.2957, FastScan to 6.9.5.1357
- New: added detection for malware launched via Command Processor AutoRun entries
- New: added scanning of programs launched via the Program Compatibility Assistant


Trojan Remover 6.9.5 Build 2956
- Main Program updated to 6.9.5.2956, FastScan to 6.9.5.1356
- New: added detection for malware using Explorer.exe to automatically launch web pages
- Fix: if a Scheduled Task was detected loading malware, the Scheduled Task was not being correctly deleted (although the loading malware would still have been disabled correctly)
- Helpfile updates


Trojan Remover 6.9.5 Build 2955
- Main Program updated to 6.9.5.2955, FastScan to 6.9.5.1355
- New: added scanning for rogue Firefox browser extensions
- New: added routine to check for Python scripts loaded at boot-time
- New: added settings to create and modify daily updates scheduling


Trojan Remover 6.9.5 Build 2954
- Main Program updated to 6.9.5.2954, FastScan to 6.9.5.1354
- New: added scanning of applications loaded as services using proxy service loaders
- New: added routine to schedule daily FastScans, to complement the FastScan that runs when the system starts, or a new user logs on
- Mod: re-categorised the Settings menu (previously the "Options" menu) to make sub-groups for Scan, FastScan and Update settings


Trojan Remover 6.9.5 Build 2953
- Main Program updated to 6.9.5.2953, FastScan to 6.9.5.1353
- Improved scanning of Scheduled Tasks launched from Task sub-folders
- Improved parsing of Script commands
- Bug fix: attempting to exclude a registry entry from future scanning would fail if an exclusions file did not already exist


Trojan Remover 6.9.5 Build 2952
- The installer now downloads the databases separately to ensure the latest are always installed (an offline installler is provided for use on systems not connected to the Internet)
- Bug fix: a conflict with Nortons Internet Security has been identifed and resolved
- Bug fix: a heuristic scan module was raising a false alert when run on an XP system, if the scan was "Run As" a different user to the logged on user


Trojan Remover 6.9.5 Build 2950
- Added detection and fixing of hijacked browser and program shortcuts in order to deal with redirects created by the likes of launchpage.org, amisites.com, and others
- Modified file exclusion routines so they are only applied to the local machine, not to any roaming profile


Trojan Remover 6.9.5 Build 2949
- Main Program updated to 6.9.5.2949, FastScan to 6.9.5.1350
- Added new heuristics to detect file-less malware spawned using Powershell


Trojan Remover 6.9.5 Build 2948
- Main Program updated to 6.9.5.2948, FastScan to 6.9.5.1349, Updater to 1.4.1.1118
- Improved scan speed times
- Minor fixes

更新時間：2022-01-31
更新細節：

What's new in this version:

Trojan Remover 6.9.5 Build 2979
- New: added heuristic detection for malware loaded by Scheduled Tasks
- Mod: FastScan settings for standard User accounts now inherit settings configured when the main Trojan Remover program is run. A future update should allow standard User accounts to configure their own scan settings.


Trojan Remover 6.9.5 Build 2977
- fix: removed false detection on new Firefox Scheduled Updates Task


Trojan Remover 6.9.5 Build 2976
- Main Program 6.9.5.2976, Updater 2.0.0.1147
- New: added routines to handle Windows 10 Exploit Mitigation and Controlled Folder Access settings


Trojan Remover 6.9.5 Build 2975
- New: added new heuristic tests for specific malware registry entries
- Update: Helpfile updated
- Update: Uninstaller updated


Trojan Remover 6.9.5 Build 2974
- New: the main program Help | About Trojan Remover | Version Info screen now shows whether any program component updates are available
- Fix: removed intermittent false positive rootkitted file alert on an Open Hardware Monitor driver
- Fix: under certain circumstances the Trojan Remover logfile was not being correctly written after a scan had been completed
- Fix: if malware entries were identified in the HOSTS file Trojan Remover would fail to repair the file due to changes made in an earlier build. This has now been fixed


Trojan Remover 6.9.5 Build 2973
- New: Updated Windows 10 version checks


Trojan Remover 6.9.5 Build 2972
- New: Updated Windows 10 version checks for May 2020 Update

- Fix: an error in build 2971 meant that "Prompt for Action" when scanning folders was not showing the alert form so the User could not determine the action to take


Trojan Remover 6.9.5 Build 2971
New:
- Scan progress is now shown visually in the taskbar icon
- visual scan progress now shown when using the drive/folder scan

Fix:
- stopped the drive/folder scan from creating and then deleting numerous temporary shortcut files whilst extracting file icons for the folder display


Trojan Remover 6.9.5 Build 2970
Fix:
- upated the fix to exclusion routines
- the buttons on certain dialogs would not work if running on XP, following the update to 6.9.5.2969


Trojan Remover 6.9.5 Build 2969
Fix:
- corrected errors raised when trying to exclude files from scanning, if no previous exclusions existed
- SAFE MODE default registry key restoral was not working correctly

New:
- improved detection for Powershell file-less exploits


Trojan Remover 6.9.5 Build 2967
- Main Program 6.9.5.2967, FastScan 6.9.5.1365, Updater 1.1.40
- New: added alerting for Proxy Server if intercepting internet traffic on the local Loopback port (127.0.0.1). A Proxy Server active on any other port will not be alerted on, but details of the proxy will be added to the logfile
- New: added Component Version information to the About Trojan Remover screen


Trojan Remover 6.9.5 Build 2966
- New: added Utility to remove an Internet Proxy Server if one is established


Trojan Remover 6.9.5 Build 2965
- Main Program 6.9.5.2965, FastScan 6.9.5.1364, Updater 1.4.5.1136
- Fix: a Windows Update on Aug 13 2019 meant Trojan Remover was not correctly verifying certain Windows dlls resulting in a false positive alert
- Fix: Build 1135 of the Updater was inadvertently writing to a debug logfile as well as the normal logfile


Trojan Remover 6.9.5 Build 2963
- Main Program 6.9.5.2963. Improved scan and repair of HOSTS files
- Fixed a registration key issue where the FastScan was not being re-registered when a renewal key was entered
- Updater 1.4.5.1134. Added better handling of update file extraction when Windows Defender is scanning the files after they are downloaded


Trojan Remover 6.9.5 Build 2962
- New: Main Program 6.9.5.2962, FastScan 6.9.5.1362, Updater 1.4.5.1132
- New: Updater (when run manually) now only requests Administrator privileges if absolutely needed, most operations should not need to make such a request
- New: TRElevationHelper component, used by the Updater if Administrator privileges are needed
- New: 64bit Shell Extension to provide the Windows Explorer context menu entry
- Mod: updated heuristic scans
- Mod: added new icon for Windows Explorer context menu entry
- Fix: Windows 10 version 1803 Pro and above incorrectly logged as Enterprise


Trojan Remover 6.9.5 Build 2961
- Change log not available for this version


Trojan Remover 6.9.5 Build 2960
- New: added options for the Logon and Daily FastScans to Run Silent, i.e invisible, but if an alert or dialog needs to be shown then the FastScan will automatically become visible. Running Silent becomes the default for new installations
- Update: changes to the licence key entry screen to provide better indication of possible typing errors when entering the key
- Fix: when running silent the Updater would detect minor program component updates were available but would not install them automatically, nor show itself to allow a manual update to be completed


Trojan Remover 6.9.5 Build 2959
- Fix: Scheduled Tasks running signed Microsoft programs were not being correctly scanned for ancillary malware possibilities.


Trojan Remover 6.9.5 Build 2958
- Main Program updated to 6.9.5.2958, FastScan to 6.9.5.1358
- New: added scanning routine to check for browsers launched via Scheduled Tasks to open either malicious, or adware-dependent, web pages
- Fix: the update to version 6.9.5.2957 broke updates on Windows Vista due to the way that system checks digital signatures. This update resolves the issue, but users on Windows Vista will need to download and install a new copy of the program from the Downloads page (no need to uninstall the current version first)


Trojan Remover 6.9.5 Build 2957
- Main Program updated to 6.9.5.2957, FastScan to 6.9.5.1357
- New: added detection for malware launched via Command Processor AutoRun entries
- New: added scanning of programs launched via the Program Compatibility Assistant


Trojan Remover 6.9.5 Build 2956
- Main Program updated to 6.9.5.2956, FastScan to 6.9.5.1356
- New: added detection for malware using Explorer.exe to automatically launch web pages
- Fix: if a Scheduled Task was detected loading malware, the Scheduled Task was not being correctly deleted (although the loading malware would still have been disabled correctly)
- Helpfile updates


Trojan Remover 6.9.5 Build 2955
- Main Program updated to 6.9.5.2955, FastScan to 6.9.5.1355
- New: added scanning for rogue Firefox browser extensions
- New: added routine to check for Python scripts loaded at boot-time
- New: added settings to create and modify daily updates scheduling


Trojan Remover 6.9.5 Build 2954
- Main Program updated to 6.9.5.2954, FastScan to 6.9.5.1354
- New: added scanning of applications loaded as services using proxy service loaders
- New: added routine to schedule daily FastScans, to complement the FastScan that runs when the system starts, or a new user logs on
- Mod: re-categorised the Settings menu (previously the "Options" menu) to make sub-groups for Scan, FastScan and Update settings


Trojan Remover 6.9.5 Build 2953
- Main Program updated to 6.9.5.2953, FastScan to 6.9.5.1353
- Improved scanning of Scheduled Tasks launched from Task sub-folders
- Improved parsing of Script commands
- Bug fix: attempting to exclude a registry entry from future scanning would fail if an exclusions file did not already exist


Trojan Remover 6.9.5 Build 2952
- The installer now downloads the databases separately to ensure the latest are always installed (an offline installler is provided for use on systems not connected to the Internet)
- Bug fix: a conflict with Nortons Internet Security has been identifed and resolved
- Bug fix: a heuristic scan module was raising a false alert when run on an XP system, if the scan was "Run As" a different user to the logged on user


Trojan Remover 6.9.5 Build 2950
- Added detection and fixing of hijacked browser and program shortcuts in order to deal with redirects created by the likes of launchpage.org, amisites.com, and others
- Modified file exclusion routines so they are only applied to the local machine, not to any roaming profile


Trojan Remover 6.9.5 Build 2949
- Main Program updated to 6.9.5.2949, FastScan to 6.9.5.1350
- Added new heuristics to detect file-less malware spawned using Powershell


Trojan Remover 6.9.5 Build 2948
- Main Program updated to 6.9.5.2948, FastScan to 6.9.5.1349, Updater to 1.4.1.1118
- Improved scan speed times
- Minor fixes

更新時間：2022-01-31
更新細節：

What's new in this version:

- New: updated city database
- Fix: various small changes and fixes

更新時間：2022-01-31
更新細節：

What's new in this version:

Mipony 3.2.2
- Improved Youtube download speed
- Added send.cm
- Updated takefile.link
- Updated filespace.com
- Updated mega.nz
- Improved bittorrent downloads
- Fixed, some bittorrent trackers did not work
- Fixed issues with files or paths with long names
- It is possible now to remove folders in the download folders history
- Fixed visualization errors with the torrents panel in HDPI screens
- Improved visualization with the black theme
- The installer looks better on HDPI screens
- Do not execute Mipony as administrator after the installation
- Updated Japanese language
- Updated Italian language


Mipony 3.1.1
- Fixed error uncompressing rar files with password

Added:
- shortcut Ctrl+S to start a download
- shortcut Ctrl+P to stop a download
- mundofile.com

Updated:
- wetransfer.com
- ddownload.com
- cloud.mail.ru
- userscloud.com
- prefiles.com
- subyshare.com
- anonfiles.com
- ge.tt
- megaup.netv
- hitfile.com
- uplovd.com
- backin.net
- uploadev.org

Removed:
- koofile.com
- hackerbox.org
- howfile.com
- yourfilelink.com
- filesflash.com
- eyesfile.com
- depfile.com
- Yunfile.com
- streamcloud.com
- megaupload.is
- uploadocean.com
- up07.me
- uplod.cc
- redfile.eu
- tinyupload.com


Mipony 3.1.0
- Added Dark Theme (Windows 10 Build 1903 or newer required)
- Fixed, some rar files could not be auto-extracted
- Added takefile.link


Mipony 3.0.6
- View torrent trackers
- Add trackers to torrent
- Add trackers from an url with a trackers list
- Updated Youtube
- Added xubster.com
- Added letsupload.co
- Added bayfiles.com
- Added minfil.com
- Added myfile.is
- Added filetransfer.io
- Updated ulozto.net
- Updated turbobit
- Removed diskokosmiko
- Removed datafile.com
- Removed eurshare.eu
- Removed fileflyer.com
- Removed uploadable.ch
- Removed filecloud.io
- Removed sharedir
- Removed wi.to


Mipony 3.0.5
- Improved stability
- Fixed clear completed on exit sometimes did not work
- Updated Greek translation (thanks to Spyros)
- Updated Youtube
- Updated datafilehost.com
- Updated tezfiles.com
- Updated yadi.sk
- Updated depositfiles
- Updated Mega-debrid
- Updated Alldebrid
- Updated Premiumize.me
- Updated Zevera


Mipony 3.0.4
- Improved stability
- Fixed prevent computer sleep while downloading
- When decrypting mega files the state was not shown in the interface
- Fixed rename file did not selecte the old name
- State icons when minimized to the tray bar
- Fixed overwrite exported file
- Added direct download of pdf and mkv files
- Updated userscloud
- Updated 1fichier
- Updated mexashare
- Updated yadi.sk
- Updated datafile.com
- Updated filespace.com
- Updated upload4earn
- Updated rockfile.co
- Added nofile.io
- Added file-up.org
- Added uploadev.com
- Added uploadproper.net
- Added speed4up.com
- Added megaupload.nz
- Added drop.me
- Added dropapk.com
- Updated Slovak language (thanks to Vladimir)
- Updated Italian translation (thanks to Max)


Mipony 3.0.3
- Fixed priorities
- Save the column used to sort
- Download speed limit for Direct downloads is more accurate
- Reduced CPU use on high speed downloads
- Improved stability
- Fixed download Youtube videos with high quality
- Audio from Youtube videos now is saved in mp3 format
- Show in green color the links detected that already have been downloaded
- Fixed, torrent subfiles were downloaded even if they were excluded in the Add torrent window
- Fixed, the list of the last folders selected didn't save new folders for torrents
- Fixed, could not stop sharing several items at the same time
- Fixed problem adding torrent when Mipony was closed
- Fixed, Mega now can be used with unrestrictors
- Updated mexashare
- Fixed some Mega accounts could not login


Mipony 3.0.1
- Fixed notifications were shown for complted files even with notifications disabled
- Fixed error showing Options Window
- Fixed change targer folder did not work for direct downloads
- Updated Chinese translation
- Updated Korean translation
- Updated Japanese translation
- Updated Brazilian Portuguese translation
- Updated French translation


Mipony 3.0.0
- New interface
- Version pro with torrents and online video support
- Visualization filters in the Download window
- Interface ready for high resolution monitors HDPI
- .NET 4.0 ó más nuevas es requerido


Mipony 2.5.6
- Mipony will run under .NET Framework 4.x if it is installed. It is recommended to install .NET Framework 4.6 or newer. Some downloads could not work if it is not installed.
- Updated rapidgator.com
- Updated Yandex disk.
- Updated tezfiles.com
- Updated diskokosmiko.mx
- Added dbr.ee
- Added upload4earn.com
- Updated box.com
- Updated Bulgarian translation (thanks to Pavel).
- Updated userscloud.com


Mipony 2.5.5
- Added linkifier premium support
- Added uploadgig premium support
- Updated alfafile.net
- Updated upstore.net
- Updated jeodrive.com
- Updated Yandex
- Updated inclouddrive
- Updated dropbox
- Updated file-upload.com
- Updated uplod.cc
- Updated filefox.cc
- Updated filejoker.net
- Updated prefiles.com
- Updated wholecloud
- Updated extmatrix.com
- Updated gavitex.com
- Updated dropbox.com
- Updated file-space.org
- Updated redfile.eu
- Updated workupload.com
- Updated up07.me
- Updated share4web.com
- Removed unlimitzone
- Removed abelhas
- Removed livecloudz
- Removed vidlockers
- Removed ddlstorage
- Removed gulfup
- Removed uploadrocket
- Removed filemoney
- Removed mediafree
- Removed uplea
- Removed hugefiles
- Removed uploadex
- Removed bytewhale
- Removed Uploadingsite
- Removed Br2share
- Removed Uploadx
- Removed copiapop
- Removed MegaFileUpload
- Removed Putfiles
- Removed uploadz
- Removed avatarshare
- Removed datasbit
- Removed bitload
- Removed freakshare.com
- Removed Bitshare.com
- Removed crocko.com
- Removed debfile.com
- Removed putdrive.com
- Removed nodefiles.com


Mipony 2.5.4
- Updated filefactory.com
- Updated keep2share.cc
- Updated depfile.com
- Updated upera.co
- Added zapfile.net premium
- Added filenext.com premium
- Added katfile.com premium
- Added rapidrar.com premium
- Added userscloud.com premium
- Added clicknupload.net premium
- Added brupload.net premium
- Updated 1fichier.com
- Updated rockfile.eu
- Updated putfiles.in
- Updated uplod.ws
- Updated uploadgig.com
- Updated turbobit.net premium
- Updated clicknupload.net
- Updated yadi.sk
- Added crazyshare.cc
- Added uploadbits.com
- Added zapfile.net
- Added cloudyfiles.com
- Added file.al
- Removed fileserve.com


Mipony 2.5.3
- Added icerbox.com
- Added some icons
- Proxy password is now hidden
- Turbobit updated
- Updated tezfiles.com
- Updated suprafiles.co
- Added putfiles.in
- Added uploadz.co
- Added bitload.org
- Updated tusfiles.net
- Updated depositfiles.com
- Updated uploads.to
- Added wickedcloud.io
- Updated keep2share
- Updated Yandex (yadi.sk)
- Updated 4shared.com
- Updated rapidrar.com
- Updated katfile.com
- Updated file-upload.net
- Updated katfile.com
- Added megadrive.tv
- Added uploadify.net
- Updated linksnappy.com
- Updated data.hu
- Udated wholecloud.net
- Updated rgho.st
- Updated gavitex.com
- Updated mega-debrid.eu
- Updated dropbox.com
- Added nodefiles.com
- Added datasbit.com
- Added uploadbank.com
- Removed sockshare.com
- Removed ziddu.com
- Removed uploadc.com
- Removed vodlocker.com
- Removed erafile.com
- Removed ulnow.com
- Removed city-upload.com
- Removed sharingmaster.com
- Removed neodrive.co
- Removed upl.one
- Removed datoteke.com
- Removed joinfile.com
- Removed lafiles.com
- Removed promptfile.com
- Removed junocloud.me
- Removed sfshare.se
- Removed kingfiles.net
- Removed tigerfiles.net
- Removed loadus.net
- Removed gboxes.com
- Removed filepi.com


Mipony 2.5.2
- Added Rarefile.net premium support
- Added copiapop.com account support
- Added filejoker premium support
- Added backin.net premium support
- Updated upstore.net
- Updated katfile.com
- Updated dfiles.eu
- Updated uploads.to
- Added glbupload.com
- Added ausfile.com
- Added uplod.ws
- Added suprafiles.net
- Added file-upload.cc
- Added filenext.com
- Added uploadgig.com
- Added up-4ever.com
- Updated katfile.com
- Updated uplea.com
- Updated bezsms.org
- Updated yadi.sk
- Updated share-online.biz
- Updated webshare.cz
- Updated vidup.me
- Removed cloudsix.me
- Removed letitbit.net
- Removed secureupload.eu
- Removed uploading.com
- Removed sharesix.com


Mipony 2.5.1
- Fixed in some computers the captcha window was out of the screen
- When many links were detected Mipony was frozen in some computers
- Updated mega.nz
- Updated bigfile.to
- Updated rusfolder.com
- Added debfile.com
- Added mexashare.com


Mipony 2.5.0
- Show Windows 10 style notification when files are completed or links are detected
- New option to change the destination folder for links in the downloads list
- Press enter/Escape in the window for when we add an existing file
- Avoid closing Mipony when it is decrypting a file
- Remember and restore captcha window position
- When the download folder does not extist, Mipony will create it instead of changing to the default folder
- Network paths are not reseted to the default download path when the network path is not found
- Sorting downloads by status now sorts the downloading files first,then waiting, etc. and not alphabetically
- Sorting downloads by priority now sorts higher priority first instead of alphabetically
- Show the speed in the title bar before the version number, so you can easily see the speed in the Windows task bar
- Double click a completed download will open the file
- Use Ctrl+F to search for files in the downloads list
- Downloads history now can be saved for up to 2 years period
- Keep selection when moved a group of files to the first or the last position
- Removed download file segments limit for Rapidgator premium downloads
- Fixed some downloads were corrupted
- CaptchaBrotherhood Plugin loading has been disabled since it no longer works
- Mipony can now download from uploaded.net using more segments
- Now the referer url can be set to many downloads at the same time
- Updated uploaded.net
- Updated Google Drive.
- Updated solidfiles.com
- Updated keep2share.cc
- Updated downace.com
- Updated sdilej.cz
- Updated androidfilehost.com
- Updated box.com
- Updated uploadocean.com
- Updated hitfile.com
- Updated turbobit.net
- Updated backin.net
- Updated upstore.net premium
- Updated downace.com
- Updated uloz.to
- Added dropbox.com
- Added up07.net
- Added gavitex.com
- Added bdupload.info
- Added erafile.com
- Added cloudup.com
- Added vodlocker.com
- Added filetrip.net
- Added megafileupload.com
- Removed fileswap.com
- Removed shareflare.net
- Removed revclouds.com
- Removed minus.com
- Removed filesin.com
- Removed filesuniverse.com
- Removed uploadbaz.com
- Removed 24uploading.com
- Removed zorofiles.com
- Removed myupload.dk
- Removed speedyshare.com
- Removed sharing.zone

更新時間：2022-01-19
更新細節：

What's new in this version:

- New: updated city database

更新時間：2021-12-29
更新細節：

What's new in this version:

- New: Windows 11 compatibility
- New: updated city database
- Fix: various small changes and fixes

更新時間：2021-10-31
更新細節：

What's new in this version:

- New: updated city database

更新時間：2021-10-22
更新細節：

What's new in this version:

- New: important updates of timezone and city databases
- Fix: various small changes and fixes