Intel Extreme Tuning Utility

What's new in this version:

Intel Extreme Tuning Utility 6.4.1.23
- ACPI driver crash issue
- Fixed an issue with the IOCBIOS where the system BSOD when XTU


Intel Extreme Tuning Utility 6.4.1.19
- Change log not available for this version


Intel Extreme Tuning Utility 6.4.1.15

Features:
- Installation and platform support for Next generation Intel Core processor family

Defect fixed:
- Exploit issues fixes related to XTU benchmarking


Intel Extreme Tuning Utility 6.4.1.11

Features:
- Installation and platform support for Next generation Intel® Core™ processor family

Defect Fixed:
- Showing error on click of Show Values of default/normal profile, if there is any error exists in profile
- XTU overclocking does not work on RS3 as iocbios driver not get loaded on RS3
- XTU Crash is observed in calling update profile in SDK
- On tuning 1
- Active core ratio”, OCMB write of 0x11 and 0x1D is broken


Intel Extreme Tuning Utility 6.3.0.56

Features:
- Installation and platform support for Next generation Intel Core processor family

Defect Fixes:
- 1604411750: [XTU][SKX][BDX]Tuning any one Per core ratio is applied to all per-cores on programming 0x11


Intel Extreme Tuning Utility 6.3.0.54
Defect Fixes:
- [XTU] [SKX] Remove dependency between -Core Voltage and Per-Core Voltage Target, Core Voltage Offset and Per Core Voltage Offset.
- [XTU] [SKX] Per core voltage target can be tuned independently. If any per core voltage target is tuned above package core voltage and applied and then user clicks on Hide Advanced button then highest voltage of per core voltage target needs to be proposed to package voltage.
- [XTU] [SKX] Per core voltage offset can be tuned independently. If any per core voltage offset is tuned above package core voltage offset and applied and user clicks on Hide Advanced button then highest voltage of per core voltage offset needs to be proposed to package voltage offset.
- [XTU] If the user tunes any of per core ratio greater than 1 active core ratio, then no need to tune all per ratios and all active core ratio to the user tuned ratio, instead only 1 active ratio should be tuned to the user tuned ratio .
- [XTU] On Tuning Core voltage/Core voltage offset -only Core Voltage/Core voltage offset should be applied to system. P-code will automatically update per core voltage target/offset. Upon Apply button click per core voltage target/offset data will get refreshed.
- [XTU] [SKL] [KBL] MMIO write removed for SKL and KBL if 1 Active core is tuned


Intel Extreme Tuning Utility 6.2.0.27
- Change log not available for this version


Intel Extreme Tuning Utility 6.2.0.24
- Change log not available for this version