Google Chrome (64-bit)

最新版本 The Dude 6.45.1

The Dude 6.45.1

The Dude 6.45.1
谷歌瀏覽器 64 位是一個瀏覽器,結合了最小的設計和先進的技術,使網絡更快,更安全,更容易。一切都使用一個框 - 輸入地址欄,並獲得搜索和網頁的建議。您的熱門網站的縮略圖,讓您立即以任何新標籤閃電般的速度訪問您最喜愛的網頁。桌面快捷方式允許您直接從桌面啟動您最喜愛的 Web 應用程序。谷歌 Chrome 64 位離線 PC 安裝程序被超過一半的在線用戶使用,它很可能會在其他瀏覽器中迅速獲得動力.



為什麼要使用谷歌瀏覽器?

立即搜索
在同一個框中搜索和導航。從您鍵入時顯示的結果和建議中進行選擇,包括您最近的搜索和訪問過的網站,以便您快速找到想要的內容.

Type less
厭倦用相同的信息一次又一次地填寫 Web 表單?自動填充功能讓您只需點擊一下即可完成表格。而且它也可以在各種設備上工作 - — 所以你可以跳過所有的小屏幕輸入。

拿起您離開的地方
Chrome 將您打開的標籤,書籤和最近的搜索從您的電腦帶到您的手機或平板電腦,反之亦然。這樣,你的所有設備上都有你的網頁。只需登錄您的其他設備即可開始同步。下載谷歌瀏覽器離線安裝程序設置!

體驗更智能的 web
當您使用 Chrome 64 位瀏覽器時,獲得最好的谷歌瀏覽器。 Chrome 和 Google 攜手合作,為您帶來更多相關的 Google 產品相關建議和功能,包括 Google 語音搜索和 Google 即時。

使 Chrome 瀏覽器成為您的朋友
瀏覽 Chrome 主題,應用和擴展程序的方式。通過書籤和開始頁面直接訪問您喜歡的網頁目的地。設置 Chrome 之後,您的自定義內容將在所有設備上保持同步.

也提供:下載 Google Chrome for Mac

ScreenShot

軟體資訊
檔案版本 The Dude 6.45.1

檔案名稱 dude-install-6.45.1.exe
檔案大小
系統 Windows 7 64 / Windows 8 64 / Windows 10 64
軟體類型 免費軟體
作者 Google
官網 http://www.google.com/chrome/browser/desktop/index.html
更新日期 2019-07-01
更新日誌

What's new in this version:

Important note:
- Due to removal of compatibility with old version passwords in this version, downgrading to any version prior to v6.43 (v6.42.12 and older) will clear all user passwords and allow password-less authentication. Please secure your router after downgrading

Changes:
- added support for IEEE 802.1X Port-Based Network Access Control
- added support for EAP authentication methods (eap-tls, eap-ttls, eap-peap, eap-mschapv2) as initiator
- removed insecure password storage
- correctly display bridge FastPath status when vlan-filtering or dhcp-snooping is used
- correctly handle bridge host table
- fixed log message when hardware offloading is being enabled
- improved stability when receiving traffic over USB modem with bridge firewall enabled
- fixed CAP system upgrading process for MMIPS
- fixed interface-list usage in access list
- improved packet processing after overloading interface
- added "key-type" field
- added support for ECDSA certificates (prime256v1, secp384r1, secp521r1)
- fixed self signed CA certificate handling by SCEP client
- made RAM the default CRL storage location
- removed DSA (D) flag
- removed "set-ca-passphrase" parameter
- legacy adapters require "disable-running-check=yes" to be set
- added "replace" parameter for backup "upload-file" command
- fixed GRE protocol packet connection-state matching (CVE-2014-8160)
- significant stability and performance improvements
- fixed known multicast flooding to the CPU
- added ethernet tx-drop counter
- correctly display auto-negotiation information for SFP/SFP+ interfaces in 1Gbps rate
- fixed auto negotiation when 2-pair twisted cable is used (downshift feature)
- fixed "tx-drop" counter
- improved switch-chip resource allocation on CRS326, CRS328, CRS305
- added "custom-script" field that prints custom configuration installed by Netinstall
- automatically set "installation" parameter for outdoor devices
- changed default configuration type to AP for cAP series devices
- fixed channel width selection for RU locked devices
- create dual stack queue based on limitations specified on DHCPv4 server lease configuration
- do not require lease and binding to have the same configuration for dual-stack queues
- show warning in log if lease and binding dual-stack related parameters do not match and create separate queues
- added "client-mac-limit" parameter
- added IP conflict logging
- added RADIUS accounting support with queue based statistics
- added "vendor-class-id" matcher (CLI only)
- improved stability when performing "check-status" command
- replaced "busy" lease status with "conflict" and "declined"
- added option to disable rapid-commit
- fixed status update when leaving "bound" state
- added additional RADIUS parameters for Prefix delegation, "rate-limit" and "life-time"
- added "address-list" support for bindings
- added "insert-queue-before" and "parent-queue" parameters
- added RADIUS accounting support with queue based statistics
- added "route-distance" parameter
- fixed dynamic IPv6 binding without proper reference to the server
- override prefix pool and/or DNS server settings by values received from RADIUS
- correctly create neighbors from VLAN tagged discovery messages
- fixed CDP packets not including address on slave ports (introduced in v6.44)
- improved neighbour's MAC address detection
- limit max neighbour count per interface based on total RAM memory
- show neighbors on actual mesh ports
- include "message-id" identification field in e-mail header
- properly release e-mail sending session if the server's domain name can not be resolved
- added support for 25Gbps and 40Gbps rates
- fixed running (R) flag not present on x86 interfaces and CHR legacy adapters
- increased loop warning threshold to 5 packets per second
- added SFTP support
- improved user policy lookup
- fixed fragmented packet processing when only RAW firewall is configured
- process packets by firewall when accepted by RAW with disabled connection tracking
- fixed missing minus close to zero coordinates in dd format
- make sure "direction" parameter is upper case
- strip unnecessary trailing characters from "longtitude" and "latitude" values
- use "serial0" as default port on LtAP mini
- added "interface-mac" variable to HTML pages
- moved "title" HTML tag after "meta" tags
- adjusted debug packet logging topics
- added support for ECDSA certificate authentication (rfc4754)
- added support for IKE SA rekeying for initiator
- do not send "User-Name" attribute to RADIUS server if not provided
- improved certificate verification when multiple CA certificates received from responder
- improved child SA rekeying process
- improved XAuth identity conversion on upgrade
- prefer SAN instead of DN from certificate for ID payload
- improved logging for IPv6 Pool when prefix is already in use
- added dynamic comment field for "active-peers" menu inherited from identity
- added "ph2-total" counter to "active-peers" menu
- added support for RADIUS accounting for "eap-radius" and "pre-shared-key-xauth" authentication methods
- added traffic statistics to "active-peers" menu
- disallow setting "src-address" and "dst-address" for transport mode policies
- do not allow adding identity to a dynamic peer
- fixed policies becoming invalid after changing priority
- general improvements in policy handling
- properly drop already established tunnel when address change detected
- renamed "remote-peers" to "active-peers"
- renamed "rsa-signature" authentication method to "digital-signature"
- replaced policy SA address parameters with peer setting
- use tunnel name for dynamic IPsec peer name
- improved system stability when receiving bogus packets
- renamed SIM slots "up" and "down" to "2" and "3"
- added initial support for Vodafone R216-Z
- added passthrough interface subnet selection
- added support for manual operator selection
- allow setting empty APN
- allow to specify URL for firmware upgrade "firmware-file" parameter
- do not show error message for info commands that are not supported
- fixed session reactivation on R11e-LTE in UMTS mode
- improved firmware upgrade process
- improved "info" command query
- improved R11e-4G modem operation
- renamed firmware upgrade "path" command to "firmware-file" (CLI only)
- show alphanumeric value for operator info
- show correct firmware revision after firmware upgrade
- use default APN name "internet" when not provided
- use secondary DNS for DNS server configuration
- added support for additional Serial Console port on GPIO headers
- added support for link scope opaque LSAs (Type 9) for OSPFv2
- fixed opaque LSA type checking in OSPFv2
- improved "unknown" LSA handling in OSPFv3
- added "verify-server-certificate" parameter for OVPN client (CVE-2018-10066)
- added initial support for Quectel BG96
- increased minimal free RAM that can not be used for proxy services
- improved system stability when receiving bogus packets
- fixed MAC address duplication between sfp-sfpplus1 and wlan1 interfaces (wlan1 configuration reset required)
- improved system stability ("/system routerboard upgrade" required)
- renamed 'sim' menu to 'modem'
- fixed S-35LC20D transceiver DDMI readouts after reboot
- added USSD message functionality under "/tool sms" (CLI only)
- allow specifying multiple "allowed-number" values
- improved delivery report logging
- added "dot1dStpPortTable" OID
- added OID for neighbor "interface"
- added "write-access" column to community print
- allow setting interface "adminStatus"
- fixed "send-trap" not working when "trap-generators" does not contain "temp-exception"
- fixed "send-trap" with multiple "trap-targets"
- improved reliability on SNMP service packet validation
- properly return multicast and broadcast packet counters for IF-MIB OIDs
- accept remote forwarding requests with empty hostnames
- added new "ssh-exec" command for non-interactive command execution
- fixed non-interactive multiple command execution
- improved remote forwarding handling (introduced in v6.44.3)
- improved session rekeying process on exchanged data size threshold
- keep host keys when resetting configuration with "keep-users=yes"
- use correct user when "output-to-file" parameter is used
- improved stability when received traffic hits tarpit firewall
- added IPv6 ND section to supout file
- added "kid-control devices" section to supout file
- added "pwr-line" section to supout file
- changed IPv6 pool section to output detailed print
- properly reapply settings after switch chip reset
- added "max-block-size" parameter under TFTP "settings" menu (CLI only)
- improved link fault detection on SFP+ ports
- added LTE CQI and IMSI parameter support
- fixed potential memory corruption
- improved error reporting with incorrect firware upgrade XML file
- improved stability when sending large ping amounts
- improved stability when stopping traffic generator
- removed "local-address" requirement when "ipsec-secret" is used
- added support for "Delegated-IPv6-Pool" and "DNS-Server-IPv6-Address" (CLI only)
- do not show unused "dmg" paramete
- prefer AP with strongest signal when multiple APs with same SSID present
- show running frequency under "monitor" command
- added "System/SwOS" menu for all dual-boot devices
- do not allow setting "dns-lookup-interval" to "0"
- show "LCD" menu only on boards that have LCD screen
- fixed frequency duplication in the frequency selection menu
- fixed incorrect IP header for RADIUS accounting packet
- improved 160MHz channel width stability on rb4011
- improved DFS radar detection when using non-ETSI regulated country
- improved installation mode selection for wireless outdoor equipment
- set default SSID and supplicant-identity the same as router's identity
- updated "china" regulatory domain information
- updated "new zealand" regulatory domain information
- improved client-initiated renegotiation within the SSL and TLS protocols (CVE-2011-1473)

The Dude 6.45.1 相關參考資料
Download The Dude - MajorGeeks

The Dude will automatically scan all devices within specified subnets, draw and layout a map of your networks, monitor services ... The Dude 6.46 Beta 6 / 6.45.1 ...

http://www.majorgeeks.com

Download The Dude 6.45.1 6.46 Beta 6 - Softpedia

Download The Dude. Scan your network, make a layout map and start monitoring services and devices connected using this comprehensive software solution.

https://www.softpedia.com

Download The Dude 6.45.1 (Free) for Windows - Tom's Guide

Download The Dude 6.45.1 for Windows. The Dude Network Monitor is a program which helps you enhanced the way you administer your network environment.

http://downloads.tomsguide.com

Software - MikroTik Routers and Wireless

Software. Downloads · Changelogs · Download archive · RouterOS · The Dude · Mobile app ...... Stable release tree. Release 6.45.1 2019-07-01 ...

https://mikrotik.com

The Dude 6.44.1 Download for Windows 10, 8, 7 - FileHorse

Download The Dude 6.44.1 for Windows PC from FileHorse. 100% Safe and Secure ✓ Free ... Latest Version: The Dude 6.45.1. Requirements:.

https://www.filehorse.com

The Dude 6.45.1 Download - TechSpot

5 天前 - Download The Dude. Application by MikroTik which can dramatically improve the way you manage your network enviroment.

https://www.techspot.com

The Dude 6.45.1 Free Download - FileCluster

5 天前 - Download The Dude. The Dude is a free and functional network monitoring tool that provides essential capabilities for visual network ...

https://www.filecluster.com

The Dude Download (2019 Latest) for Windows 10, 8, 7 - FileHorse

5 天前 - Latest Version: The Dude 6.45.1 LATEST. Requirements: Windows XP / Vista / Windows 7 / Windows 8 / Windows 10. User Rating: Click to vote.

https://www.filehorse.com

The Dude(网络监控器)-The Dude中文版下载6.45.1-新云软件园

The Dude是一款方便实用的网络监控器软件,能够有效地帮助用户改进网络管理方式,支持ping检测到端口探测和服务检查的多样化网络监视任务,监视你设备的 ...

https://www.newasp.net